egauthier / heyu Goto Github PK
View Code? Open in Web Editor NEWThis project forked from heyux10automation/heyu
Heyu source code
License: GNU General Public License v3.0
This project forked from heyux10automation/heyu
Heyu source code
License: GNU General Public License v3.0
Installing Heyu on a Unix-like system. Heyu requires a reasonable compiler (GCC works well), the 'make' program, and the development header (.h) files. Many OS distributions will either install these by default or provide a visible option to include the "development package" during OS installation. But some of the newer OS's do not, e.g., with Ubuntu Linux it's necessary to afterward execute the command 'apt-get install build-essential'. Note: If you're upgrading from a previous version of Heyu, run 'heyu stop' under that version before proceeding. Quickstart: sh ./Configure.sh [option] (As a normal user) make (As a normal user) su (Become superuser) make install (As superuser) exit (Revert to normal user) heyu info (As a normal user, to test installation) (The 'make install' requires that you have write permissions to /usr/local/bin, man page, and other directories.) Ubuntu Linux users should execute 'sudo make install' rather than the three commands 'su', 'make install', and 'exit'. Advanced users and package maintainers may also wish to refer to a dedicated section at the bottom of this file. *** Kindly report any compile errors or warnings to the author.*** It can take 5-8 seconds to set up the heyu_relay daemon and initialize the CM11A interface the first time Heyu is run, e.g., with 'heyu info'. Running 'heyu help' will display the long list of Heyu commands. These are further explained in the man page heyu(1). CUSTOMIZING ----------- The Configure.sh script creates a Makefile by running 'uname -s' and then passing known good options to Autoconf configure script. The contents of Makefile.in is then expanded to the Makefile. Changes to the makefile should be made in Configure.sh or Makefile.in. If Configure.sh can not figure out what your system is, you can try sh ./Configure.sh generic or sh ./Configure.sh sysv If those don't work, we'll have to figure it out by hand. Please contact the author so your discoveries can be integrated into the next release. SERIAL PORTS ------------ Many newer computers don't have built-in RS232 serial ports, only USB ports. For these computers a USB-Serial adapter is required to connect the CM11A. Before purchasing a USB-Serial adapter, verify that the driver for your OS is available, either built-in to the OS, provided with the adapter on a companion disc, or downloadable from the adapter manufacturer's website. If you have a choice, select an adapter with an FTDI chipset over one with a Prolific chipset. One dealer who specifies the chipset and supported operating systems for each adapter model for sale is ByteRunner (http://ww.byterunner.com). Drivers for adapters with a Prolific PL2303 chipset can often be found at http://www.prolific.com.tw/eng/downloads.asp?ID=31 For Linux, the serial device name for a USB-Serial adapter will normally be /dev/ttyUSBx, where x = 0 for the first adapter plugged into the USB port and higher numbers for subsequent adapters. Note: The International 230V version of the CM11 sold in Europe and elsewhere is now usually provided with a USB cable in addition to the standard RS232 cable. Many Linux users have experienced lockups and other problem with this USB cable (based on a Prolific chipset) which disappeared when they switched to a regular USB-Serial adapter. OPTIONS ------- By default, Heyu allocates space for 32 common flags, 32 counters, and 32 user countdown timers. The number of each of these can be increased at compile time with switches -flags=NN, -counters=NN, and -timers=NN. The specified NN must be in the range 1-1024 and will be rounded up to the nearest multiple of 32, e.g., sh ./Configure.sh -flags=64 -timers=75 will allocate space for 64 flags and 96 timers, the latter because the specified 75 is rounded up to 96. The number of counters will remain 32. By default, support for the X10 CM17A "Firecracker" device is compiled into Heyu. As there is no known version of this device available which transmits at frequencies other than the 310 MHz used for transceivers in North America, users outside this region may wish to compile without CM17A support. Since the CM17A is both powered and actuated by the DTR and RTS serial lines, support for this device might as well also be omitted if your serial port hardware does not support these lines. To do so, run the Configure.sh step mentioned above with the '-nocm17a' switch, i.e., sh ./Configure.sh -nocm17a By default, support for Extended Type 0 (Shutter and Shade) commands is compiled into Heyu. As there is only one module known to support these commands (the 230V, 50Hz Marmitek SW10 Shutter Motor Controller sold in Europe), this support may be omitted by using Configure.sh with the '-noext0' switch, i.e., sh ./Configure.sh -noext0 By default, support for RFXSensors is compiled into Heyu. RFXSensors require a WGL W800RF32 or RFXCOM X10 RF receiver as well as a RFXSensor transmitter. This support may be omitted by including the '-norfxs' switch with Configure.sh, i.e., sh ./Configure.sh -norfxs By default, support for RFXMeters is compiled into Heyu. RFXMeters requires a 433.92 MHz RFXCOM X10 RF receiver as well as the RFXMeter transmitter. This support may be omitted by including the '-norfxm' switch with Configure.sh, i.e., sh ./Configure.sh -norfxm By default, support for the Digimax 210 remote thermostat is compiled into Heyu. The Digimax requires a 433.92 MHz RFXCOM X10 RF receiver as well as the Digimax transmitter. This support may be omitted by including the '-nodmx' switch with Configure.sh, i.e., sh ./Configure.sh -nodmx By default, support for Oregon RF sensors is compilied into Heyu. Oregon sensor support requires a 433.92 MHz RFXCOM X10 RF receiver as well as a supported model of Oregon sensor. This support may be omitted by including the '-noore' switch with Configure.sh, i.e., sh ./Configure.sh -noore By default, support for signals received from KaKu and HomeEasy transmitters is compiled into Heyu. KaKu/HomeEasy support requires a 433.92 MHz RFXCOM X10 RF receiver. This support may be omitted by including the '-nokaku' switch with Configure.sh, i.e., sh ./Configure.sh -nokaku By default, support for RFXLAN RF receiver (network version of RFXCOM) is compiled into Heyu. This support may be omitted by including the '-norfxlan' switch with Configure.sh, i.e., sh ./Configur.sh -norfxlan Notes for Mac OS X: ------------------- The heyu executable is installed in directory /usr/local/bin, which is not on the Mac's default PATH. You will have to add this directory to your $PATH. Similarly you may have to add the man page directory /usr/local/man to your $MANPATH (or the /usr/share/misc/man.conf file for newer versions of OS X which have deprecated $MANPATH). Newer Macs don't have an actual RS232 serial port, only a USB port, and a USB/Serial adapter is required. The manufacturer's adapter driver will usually add two or more different devices in /dev (and often with "usbserial" as part of the name). You'll have to experiment to see which one works with Heyu by trying the different names in the TTY directive in the heyu configuration file. The device name which also includes "cu" rather than "tty" has been found to work on the (few) Macs tested thusfar. Notes for AT&T SysV r4: ---------------------- The function uname(1) used to determine the system type for Configure.sh does not distinguish this OS from other sysv systems. Supply the system type parameter "attsvr4" to Configure.sh, i.e., run 'sh ./Configure.sh attsvr4'. Notes for OpenSolaris: --------------------- The directories in which the Heyu binary executable and man pages are installed are set per the OpenSolaris system conventions to: BIN = /opt/heyu/bin MAN = /opt/heyu/man/man1 MAN5 = /opt/heyu/man/man5 However for a virgin OS installation, none of these directories are on the system's PATH/MANPATH and the user is responsible for adding them to the PATH/MANPATH in order to have full use of Heyu. The user may alternatively rerun Configure.sh for "OpenSolaris_BSD", i.e., 'sh ./Configure.sh opensolaris_bsd', which will set the directories using the BSD convention under the /usr/local tree, which however may be deleted when OpenSolaris is upgraded. Some older versions of OpenSolaris, in particular SXCE (Solaris Express Community Edition), may encounter an error when running 'make install' like "test: argument expected". If this occurs, change the first line of file install.sh to read "#!/bin/ksh". Notes for advanced users and (binary) package maintainers: ---------------------------------------------------------- From now on, you can use standard Autotools methods to build your package instead of dealing with the old Configure.sh, Makefile.in and install.sh. See INSTALL for generic instructions. Default runtime directories passed through ./configure to make: SYSBASEDIR SYSCONFDIR/heyu, or just SYSCONFDIR if already containing 'heyu' in its path; for example, if you specify --prefix=/opt/heyu, then SYSCONFDIR will be set to /opt/heyu/etc, and SYSBASEDIR will end up as SYSCONFDIR; override with CPPFLAGS='... -DSYSBASEDIR=\"path\" ...' LOCKDIR LOCALSTATEDIR/lock; override with CPPFLAGS='... -DLOCKDIR=\"path\" ...' SPOOLDIR LOCALSTATEDIR/tmp/heyu; override with CPPFLAGS='... -DSPOOLDIR=\"path\" ...' Default installation directories passed through ./configure to 'make install': heyu binary BINDIR heyu.1 man page MANDIR/man1; override with 'man1dir=<path>' (for example, SCO used to install in /usr/local/man/man.1) *.5 man pages MANDIR/man5; override with 'man1dir=<path>' (SCO case) README, etc. DOCDIR x10*.sample SYSBASEDIR To install individual components selectively instead of all at once, use 'make install-exe', 'make install-man1', 'make install-man5' (or 'make install-man' for both man sets), 'make install-dist_docDATA' and 'make install-dist_pkgsysconfDATA' (or just 'make install-data' for non-exe parts all together) respectively. Heyu custom post-install.sh (formerly install.sh) script is no longer run by 'make install' unless instructed with --enable-postinst[=<path>]. Other than that, you are free to select your own preferred or system dependent values for CC, CPP, CFLAGS, CPPFLAGS, LDFLAGS and LIBS, as well as your preferred --enable/--disable options and FLAGS / COUNTERS / TIMERS values (see ./configure --help for details).
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.