A Example of Ethernet OAM (IEEE 802.3ah)

This project implement a example of Ethernet OAM protocol. You can utilize it as an software OAM protocol tester ❓ or can either integrate the code into any project that need OAM functionality.

It has been only tested in macOS 10.13.x and Debian 9 (running in VirtualBox or in Docker's container), but because the build system is "cmake", it will be easily to build and test in other Linux variants.

During the development, just a few operations, like remote loopback, event report, etc. have been tested with Cisco 3XXX router.

❓It does not means this project fully compliant with the OAM spec., but it came with source code, so you can easily custimize it to execute any OAM related testing.

Features:

Remote Fault Indication
Link Monitoring
Remote Loopback
Statistics (partial)
OAM session management
Event Configuration
Event Log
RFC 4978
- dot3OamTable (MANDATORY-GROUPS)
- dot3OamPeerTable (MANDATORY-GROUPS)
- dot3OamLoopbackTable
- dot3OamStatsTable (MANDATORY-GROUPS)
- dot3OamEventConfigTable
- dot3OamEventLogTable
- dot3OamThresholdEvent (Event)

In this document, the meaning of 'OSX' is the same as 'macOS'.

Environment

Linux - Debian 9 (Use Debian 8 or Ubuntu 16.x should be also fine), or
macOS - 10.13.x

GCC

** FYI. For compiling GoolgTest, it is needed to enable "-std=c++11" flag.

Common

Install GTest

Linux

apt update 
apt-get install build-essential -y
apt-get install doxygen -y
apt install cmake -y
apt install libpcap-dev -y

OSX

brew install pkg-config
brew install automake
brew install doxygen
brew install cmake
brew innstall libpcap

Source Tree

<this-repository>
├── README.md (this file)
├── build
├── example
│   ├── client (oam management client command)
│   └── server (oam sample program)
│       ├── oam_cout.cpp (example of porting callout API)
│       ├── oam_main.cpp (main program)
│       └── user_params.h (configurables)
├── external (open sources)
│   ├── getopt
│   └── uthash
├── include
├── src
│   ├── eoamapi
│   ├── eoamlib (lib for oam functions)
│   └── xutl (some netowrk lib, include pcap wrapper)
├── test (GTest for Ethernet OAM)
│   ├── gt_cout.cpp
│   ├── gt_eoam.cpp
│   └── user_params.h

Linux/OSX

$ mkdir build
$ cd build
$ cmake ..
$ make

# NOTE:  For OSX, it don't need root priviledge for accessing libpcap, 
  so it can just use "make test"

$ sudo make test
Running tests...
Test project eoam
    Start 1: gt-xdev
1/8 Test #1: gt-xdev ..........................   Passed    5.20 sec
    Start 2: gt-xipc
2/8 Test #2: gt-xipc ..........................   Passed    2.14 sec
    Start 3: gt-xnet
3/8 Test #3: gt-xnet ..........................   Passed   28.96 sec
    Start 4: test_net
4/8 Test #4: test_net .........................   Passed   11.01 sec
    Start 5: test_xdev
5/8 Test #5: test_xdev ........................   Passed    1.20 sec
    Start 6: test_xipc
6/8 Test #6: test_xipc ........................   Passed    0.11 sec
    Start 7: test_ipc
7/8 Test #7: test_ipc .........................   Passed    0.33 sec
    Start 8: gt-eoam
8/8 Test #8: gt-eoam ..........................   Passed   13.78 sec

100% tests passed, 0 tests failed out of 8

Total Test time (real) =  62.83 sec

Run

Testing Environment

All of the testing is executed in Debian 9, but you can replace the host environment to Linux Debian variant OS (like Ubuntu, etc.) or OSX.

The VM-A, or VM-B is represented a Linux shell, Docker container, or OSX shell in a host OS.

In this document, the testing is running with the following configuration:

VM-A: VirtualBox VM running Debian 9. VM-B: A Docker container in VirtualBox.

SHELL-A-Client: command shell for executing testing command on VM-A SHELL-A-Server: command shell for executing oeam program on VM-A

SHELL-B-Server: command shell for executing oeam program on VM-B

In the sample eoam program, it is configured with a device with OAM_PARAM_MAX_PORTS ethernet ports and only port 2 is link up.

The "eoam" example server take one argument for interface name, without any argument, it will auto select the "eth0" on Linux and "en0" on OSX.

Run eoam example server

VM-A-Server:

The VM-A and VM-B (Docker container) is connected with Docker default bridge, so eoam server on VM-A is running with interface name "docker0".

$ sudo ./example/eoam docker0

10:47:48.391 [0x7b712740, 0x848e6180] xdev_open:  src mac filled by upper layer
10:47:48.391 xdev_open: mac filter 02:42:58:07:77:ee (mask 5 bytes)
10:47:48.395 [7b712740] xnet_start: xnet thread is running ...
10:47:48.395 xnet thread run user_init ...
10:47:48.396 eoam_fsm_usr_init: init interfaces
10:47:48.396 [ 2] CO: state changed old FAULT --> new ACTIVE_SEND
10:47:48.396 xnet thread enter loop (sec = 1, wait time: usec = 0).
10:47:48.396 xdev_wait: wait xdev thread terminated ...
10:47:49.225 [ 2] new remote flags [0/1, 0/0]
10:47:49.225 [ 2] rx pdu, remote valid, flags:[0/1, 0/0]
10:47:49.225 [ 2] send local: save mac 02:42:ac:11:00:02
10:47:49.225 [ 2] CO: state changed old ACTIVE_SEND --> new LOC_REM
10:47:50.265 [ 2] CO: state changed old LOC_REM --> new LOC_REM_OK
10:47:50.395 [ 2] SEND INFO: flags [1/0, 0/1]
10:47:51.201 [ 2] remote flags changes [0/1, 0/0] --> [0/1, 1/0]
10:47:51.201 [ 2] remote unstable state:LOC_REM_OK remote flag:[0/1, 1/0]
10:47:51.201 [ 2] CO: state changed old LOC_REM_OK --> new SEND_ANY
10:47:52.241 [ 2] remote flags changes [0/1, 1/0] --> [1/0, 1/0]
10:47:52.395 [ 2] SEND INFO: flags [1/0, 1/0]

VM-B-Server:

# ./example/eoam

02:47:17.176 [0xa2367740, 0x015ab570] xdev_open:  src mac filled by upper layer
02:47:17.176 xdev_open: mac filter 02:42:ac:11:00:02 (mask 5 bytes)
02:47:17.177 [a2367740] xnet_start: xnet thread is running ...
02:47:17.177 xnet thread run user_init ...
02:47:17.177 eoam_fsm_usr_init: init interfaces
02:47:17.178 [ 2] CO: state changed old FAULT --> new ACTIVE_SEND
02:47:17.178 xnet thread enter loop (sec = 1, wait time: usec = 0).
02:47:17.178 xdev_wait: wait xdev thread terminated ...
02:47:19.179 [ 2] SEND INFO: flags [0/1, 0/0]
02:47:50.457 [ 2] new remote flags [1/0, 0/1]
02:47:50.457 [ 2] rx pdu, remote valid, flags:[1/0, 0/1]
02:47:50.457 [ 2] send local: save mac 02:42:58:07:77:02
02:47:50.457 [ 2] CO: state changed old ACTIVE_SEND --> new LOC_REM
02:47:51.180 [ 2] SEND INFO: flags [0/1, 1/0]
02:47:51.497 [ 2] CO: state changed old LOC_REM --> new LOC_REM_OK
02:47:52.180 [ 2] SEND INFO: flags [1/0, 1/0]
02:47:52.433 [ 2] remote flags changes [1/0, 0/1] --> [1/0, 1/0]
02:47:52.433 [ 2] CO: state changed old LOC_REM_OK --> new SEND_ANY

Run Test Client

The default ethernet port is hard-coded as port 2, so it is not necessary to specify the port with '-i' option.

$ ./example/ctrl_eoam -h
Usage:
    -i <ifindex>: interface: oam interface
    -a [1|2]: enable/disable admin mode
    -m [1|2]: active/passive
    -l [2|4]: start/stop loopback
    -r [1|2]: ignore/process loopback
    -s [1|2|3] set link failure/dying gasp/critical
    -c [1|2|3] clear link failure/dying gasp/critical
    -S [1|2|3|4] set link error event
    -e [1|2]: enable/disable link event
    -d [1-9] set debug level <XDBG_EMERG...XDBG_DEBUG>
    -q quit eoam program
    -x: show event log

OAM session status

SHELL-A-Client:

$ ./example/ctrl_eoam -x

ifindex:2 (state = SEND_ANY)
  rev:0 admin:On, oam-mode:active max-pdu-size:1500 func:0x06
 Peer:
  mac:02:42:ac:11:00:02 oam-mode:active max-pdu-size:1500
  rev:0 oui:11:11:11 func:0x06
 Loopback:
  lpbk-status:no loopback, ignore-lpbk:Off
  info-pdu:(tx 96: rx 95) lpbk:(tx 0:rx 0)
 Events:  LF:Off, Dying Gasp:Off, Critical:Off
  err-symbols-period evt win:(1000) threshold:(1) enable:On
  err-frame--period evt win:(1000) threshold:(1) enable:On
  err-frame evt win:(10) threshold:(1) enable:On
  err-summary-sec evt win:(100) threshold:(1) enable:On

time     port idx  type loc window thresh value   run-total e-total
======== ==== ===  ==== === ====== ====== ======= ========= =========

OAM Config

Condition: Both eoam in SEND_ANY state

SHELL-A-Client:

$ ./example/ctrl_eoam -m 2

original admin On, mode On
set config success.

$ ./example/ctrl_eoam -m 1

original admin On, mode Off
set config success.

SHELL-A-Server:

10:49:38.924 [ 2] adm:On->On mo:active->passive (rev 1), next=PASSIVE_WAIT
10:49:38.924 [ 2] CO: state changed old SEND_ANY --> new PASSIVE_WAIT
10:49:39.257 [ 2] new remote flags [1/0, 1/0]
10:49:39.257 [ 2] rx pdu, remote valid, flags:[1/0, 1/0]
10:49:39.257 [ 2] passive wait: save mac 02:42:ac:11:00:02
10:49:39.257 [ 2] CO: state changed old PASSIVE_WAIT --> new LOC_REM
10:49:39.394 [ 2] SEND INFO: flags [0/1, 1/0]
10:49:40.193 [ 2] remote flags changes [1/0, 1/0] --> [1/0, 0/1]
10:49:40.193 [ 2] CO: state changed old LOC_REM --> new LOC_REM_OK
10:49:40.395 [ 2] SEND INFO: flags [1/0, 1/0]
10:49:41.233 [ 2] remote flags changes [1/0, 0/1] --> [1/0, 1/0]
10:49:41.233 [ 2] CO: state changed old LOC_REM_OK --> new SEND_ANY

SHELL-B-Server:

02:49:39.457 [ 2] remote flags changes [1/0, 1/0] --> [0/1, 1/0]
02:49:39.457 [ 2] remote unstable state:SEND_ANY remote flag:[0/1, 1/0]
02:49:39.457 [ 2] CO: state changed old SEND_ANY --> new LOC_REM_OK
02:49:40.180 [ 2] SEND INFO: flags [1/0, 0/1]
02:49:40.497 [ 2] remote flags changes [0/1, 1/0] --> [1/0, 1/0]
02:49:40.497 [ 2] CO: state changed old LOC_REM_OK --> new SEND_ANY
02:49:41.179 [ 2] SEND INFO: flags [1/0, 1/0]

Remote Loopback

SHELL-A-Client:

$ ./example/ctrl_eoam -l 2

set loopback success.

$ ./example/ctrl_eoam -l 4

set loopback success.

SHELL-A-Server:

10:53:06.637 [ 2] rev 1 cfg (0d ->  0d), state (00 -> 05)
10:53:06.637 [ 2] peer config: M:A/U:-/L:Y/E:Y/V:- state: mux:drop, par:lpbk
10:53:06.637 [ 2] CO: loopback status - remote loopback (3)
10:53:30.665 [ 2] rev 2 cfg (0d ->  0d), state (05 -> 00)
10:53:30.665 [ 2] peer config: M:A/U:-/L:Y/E:Y/V:- state: mux:fwd, par:fwd
10:53:30.665 [ 2] CO: loopback status - no loopback (1)

SHELL-B-Server:

02:53:06.633 [ 2] eoam_proc_lpbk_pdu_indication: loopback cmd 1
02:53:06.633 [ 2] eoam_proc_lpbk_pdu_indication: lpbk respond info pdu
02:53:06.633 [ 2] CO: loopback status - local loopback (5)
02:53:08.401 [ 2] rev 4 cfg (0d ->  0d), state (00 -> 02)
02:53:08.401 [ 2] peer config: M:A/U:-/L:Y/E:Y/V:- state: mux: fwd, par:drop
02:53:30.561 [ 2] eoam_proc_lpbk_pdu_indication: loopback cmd 2
02:53:30.561 [ 2] eoam_proc_lpbk_pdu_indication: lpbk respond info pdu
02:53:30.561 [ 2] CO: loopback status - no loopback (1)
02:53:32.433 [ 2] rev 6 cfg (0d ->  0d), state (02 -> 00)
02:53:32.433 [ 2] peer config: M:A/U:-/L:Y/E:Y/V:- state: mux:fwd, par:fwd

Link Event

SHELL-A-Client:

$ ./example/ctrl_eoam -S 1

set link event success.

SHELL-A-Server:

10:54:46.027 [0x7a272700][ 2] eoam_proc_report_event: type 1
10:54:46.027 [ 2] CO: raise l-events: type 1 ts 30722 loc 1 value 200 r-total 10200, e-total 1

SHELL-B-Server:

02:54:46.081 [ 2] rx evt pdu: seq 0 ts 45076 type 1 value 0:200
02:54:46.081 [ 2] CO: raise l-events: type 1 ts 30722 loc 2 value 200 r-total 10200, e-total 1

Critical Event

SHELL-A-Client:

$ ./example/ctrl_eoam -s 1

set critical success.

$ ./example/ctrl_eoam -c 1

clear critical success.

SHELL-A-Server:

10:55:54.023 [0x7a272700][ 2] eoam_proc_report_event: type 256
10:55:54.023 [ 2] SEND INFO: flags [1/0, 1/0]
10:55:54.023 [ 2] CO: raise c-events: type 256 ts 30790 loc 1 r-total 1, e-total 1
10:55:57.883 [0x7a272700][ 2] eoam_proc_report_event: type 256
10:55:57.883 [ 2] SEND INFO: flags [1/0, 1/0]
10:55:57.883 [ 2] CO: clear c-events: type 256 ts 30794 loc 1 r-total 0, e-total 0

SHELL-B-Server:

02:55:54.097 [ 2] remote flags changes [1/0, 1/0] --> [1/0, 1/0]
02:55:54.097 [ 2] CO: raise c-events: type 256 ts 30790 loc 2 r-total 0, e-total 0
02:55:57.945 [ 2] remote flags changes [1/0, 1/0] --> [1/0, 1/0]
02:55:57.945 [ 2] CO: clear c-events: type 256 ts 30794 loc 2 r-total 0, e-total 0

Log and Statistics

SHELL-A-Client:

$ ./example/ctrl_eoam -x

ifindex:2 (state = SEND_ANY)
  rev:6 admin:On, oam-mode:active max-pdu-size:1500 func:0x06
 Peer:
  mac:02:42:ac:11:00:02 oam-mode:active max-pdu-size:1500
  rev:2 oui:11:11:11 func:0x06
 Loopback:
  lpbk-status:no loopback, ignore-lpbk:Off
  info-pdu:(tx 600: rx 604) lpbk:(tx 2:rx 0)
 Events:  LF:Off, Dying Gasp:Off, Critical:Off
  err-symbols-period evt win:(1000) threshold:(1) enable:On
  err-frame--period evt win:(1000) threshold:(1) enable:On
  err-frame evt win:(10) threshold:(1) enable:On
  err-summary-sec evt win:(100) threshold:(1) enable:On

time     port idx  type loc window thresh value   run-total e-total
======== ==== ===  ==== === ====== ====== ======= ========= =========
   30722   2    1    1    1 1000   1      200     10200     1        
   30790   2    2  256    1 NA     NA     NA      NA                1

TODO

The xutl library is meant for fast prototyping or small scale network application(s), so it do not utilize modern epoll or kqueue system call. If the performance is important, it might be replaced by other networking library.

Porting to Win32.
Cross-compiling for Raspberry Pi
Variable Request
send Organization Specific OAMPDUs

MISC

Run in user mode (Linux only)

sudo setcap cap_net_raw,cap_net_admin=eip <excutable>

Reference

Author

Welcome any comment.

Edward Yang [email protected]

License

This project is licensed under the terms of the MIT license.

ed-yang / eoam Goto Github PK

eoam's Introduction

A Example of Ethernet OAM (IEEE 802.3ah)

Environment

GCC

Common

Linux

OSX

Source Tree

Linux/OSX

Run

Testing Environment

Run eoam example server

Run Test Client

OAM session status

OAM Config

Remote Loopback

Link Event

Critical Event

Log and Statistics

TODO

MISC

Reference

Author

License

eoam's People

Contributors

Stargazers

Watchers

Forkers

eoam's Issues

Recommend Projects

Recommend Topics

Recommend Org