eastbear01 Goto Github PK

0816-feeder-firmware

Firmware for the 0816 automatic 3d printed smt feeder for OpenPnP.

0816-feeder-mechanics

Mechanic Parts of the 3d printed automatic smt feeder for OpenPnP.

arduino

ESP8266 core for Arduino

arduino-esp32

Arduino core for the ESP32

arduino_core_stm32

STM32 core support for Arduino

candle

GRBL controller application with G-Code visualizer written in Qt.

deng-s-foc-controller

灯哥开源 FOC 双路迷你无刷电机驱动

dummy-robot

我的超迷你机械臂机器人项目。

espwebserver

HTTP server library for ESP8266/ESP32 Arduino cores (previously ESP8266WebServer)

grbl

An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on a straight Arduino

grbl-1

An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on a straight Arduino

grbl-ramps

GRBL 0.9j 4AXIS RAMPS 1.4V WIP forks from https://github.com/borisff/grbl-4Axis-2560/tree/master/grbl

i18n-editor

GUI for editing your i18n translation files

inverted_pendulum_dengfoc

基于SimpleFOC官方开源的动量轮倒立摆项目，低成本化和小型化后应用在DengFOC上

marlin

Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.

marlin2onraddsforopenpnp

mks-dlc

MKS DLC support grbl firmware, can use Laser mode and CNC mode,support connect MKS TFT24/32/35 and TFT_CNC firmware support lasering and cnc operation...

mks-robin-nano-v2.x

MKS Robin Nano is a powerful 32-bit 3D printer control board with STM32F103VET6. Support Marlin2.0. Support MKS TS35 touch Screens. The motherboard integrates 5 AXIS interface, hot bed, 2 heating heads, 3 NTC100K, 1 MAX31855. Support TMC UART SPI mode. Support MKS Robin WIFI for cloud printing and supports firmware update by SD card…

mks-robin-nano-v3.x

Robin nano V3 is an upgraded version of Robin Nano V2.0. The upgrade changes are quite large, including upgrading the MCU to the M4 core, and adding support for USB disk.

mks-servo42b

MKS SERVO42B is 3d printer closed loop stepper motor NEMA17 MKS SERVO42 developed by Makerbase that prevents losing steps. CPU is STM32F103C8T6 ARM 32-bit Cortex™-M3 CPU Core,72 MHz. Magnetic encoder is Allegro's A1333LLETR-T Contactless 0° to 360° angle sensor IC ,12bit .This Project open source hardware and code,support platformio build and upload firmware...

mks-servo42c

MKS SERVO42C, an upgraded version of MKS SERVO42B, built-in Field-Oriented control algorithm, position/speed/ torque closed-loop, 4 Half bridge driver with 8 MOSFET, it makes the motor quieter, lower vibration and Lower calorific.

nano_stepper

Stepper feedback controller

odrive

High performance motor control

odrive-foc-ctr

Seasky-ODrive

odrive-mks

odrive_3.6

openpnp

Open Source SMT Pick and Place Hardware and Software

proxxon-grbl-mega

Proxxon GRBL mega RAMPS

psypnp

psypnp is a collection of useful scripts for OpenPnP and a library of Python support modules to use in your own

sfeeder

Parametric Feeder Design, load in OpenSCAD to make yours.