This script has NO WARRANTY and is to be USED AT YOUR OWN RISK

This is a quick and dirty hack for the "Acer Nitro 5" to enable temperature based fan-speed control

This script is not meant to be the "right way of doing this" but rather a low effort way of getting this to work now. Ideally this repository is not needed. But for now works fine.

• Acer-Nitro-5-AN515-58-EC-Control-Linux: https://github.com/Jebaitedneko/Acer-Nitro-5-AN515-58-EC-Control-Linux
• lm-sensors: https://github.com/lm-sensors/lm-sensors

• GNU Make

These steps will install and configure the service to control you fans based on temperature. To test if it is running you can run: systemctl status nitro5-fan-speed-hack.service

1. Clone repository: git clone https://github.com/e-lisa/nitro-5-fanspeed-hack

2. Change directories to the repository: cd nitro-5-fanspeed-hack

3. Install lm-sensors and GNU Make: sudo apt install lm-sensors make

4. Configure sensors: yes |sudo sensors-detect

5. Install the service and scripts: sudo make

1. Change directories to the repository: cd nitro-5-fanspeed-hack

2. Stop the service: systemctl stop nitro5-fan-speed-hack.service

3. Run the uninstall script: make uninstall

The current fan-speed % is stored in /tmp/fanspeed and can be viewed with cat /tmp/fanspeed eg: 5 would be 5%

Happy Hacking!