duwaynef / mlm2pro-bt-app Goto Github PK

I am unable to get my pc to connect to the MLM2-MP1... It will however connect to the BT one but I know that is not the correct one. I did remove it from the list. It will still not connect to my PC. What now? BTW I did the activation steps with the rapsodo app and awesome golf. All I get in the Add a Device section, I get "Try connecting your device again."

when i open the application in the downloaded file, no prompt is given to enter API code. making me unable to connect my launch monitor. please help!

i have been using the soft where for a few months now and has been working great all the sudden I'm unable to connect my LM to the Bluetooth connector i have tried several different methods to get it to work and haven't had much luck i ended up deleting everything and re installing it still nothing it shows the Bluetooth signal on the connector and just says looking for devices not sure what happened

Howdy,
Let me start with a thank you - this is great.
My issue is having to reauthenticate with Awesome Golf every time I open it. I get the message app token expired - please authenticate in MLM software.
Could I have missed a step somewhere?

I had a successful session on Saturday, it all performed perfectly.

I went to fire up today, launching the Rapsodo app to authenticate Awesome golf and then align, first.

The cameras on the rapsodo unit don't connect to the app anymore. I can't view the feed of either the impact camera or the swing camera for alignment. Attempting to start a range session doesn't help. The blue light won't turn green, indicating its ready for a shot. I connected with this app to see if I could get it to read any shots and put them through to gspro, and it won't. I have since restarted everything, reconnected, re-installed the firmware on the rapsodo, and the apps on the ipad and phone. Nothing makes it work. Awesome golf could get the blue light to turn green, but wouldn't detect any shots. I didn't try E6. The connector app doesn't receive any shot data from it, when I ARM it and led is green.

I tried it all with an Ipad 10 and Galaxy S22. Brand new Lenovo laptop, too.

DISARM does not change it from green back to blue anymore.

I'm at a loss on what to try next. There is only one button on the thing, I've held it down for a minute if there is any "hard" reset that that does. Else I have a bricked unit. Any thoughts would be helpful.

Hello,

Working through making this connection. All firmware is up to date.

When I open the connector app for the first time I am not prompted to enter an API key.

I am able to connect the LM to my phone, authenticate Awesome Golf, then close the Rapsodo app on the phone to get back to solid red light; however the connecter app only shows Connected to GSPro and looking for device in the LM panel.

I am making the phone-lm connection via direct wifi, not through my home network

Please let me know your thoughts

Hi there, thanks for working on this. I was able to get everything connected, BT APP showing GSPRO and MLM2pro connected, but Blue LED on MLM wont turn green. Sending Test Shot works but live hitting is not working. Running Win 11 Pro, MLM2Pro. I tested this using the old ipad method using another custom connector where you have to draw boxes around the screen data and that works fine.

Other than authorize 3rd party awesome in the MLM android app, do I need to do anything else from the phone? thanks

Hi there. I am in the initial setup phase but the LM will not connect. What am I doing wrong?

Is there anyway to get this to connect to my garage pc, that's streaming gspro via steamlink to my gaming pc in my basement?

You are a GOD btw

Thanks.

Hi,

sometimes I’ll get on the GSpro connection status LM, Misread and even after hitting more balls this doesn’t clear and the shorts aren’t showing in GSPro. I’m using the most up-to-date public firmware on the MLMpro, any ideas what this is or how to reset it easy?

thanks

Hello, not sure this where I should ask but will the connector work with EXputt RG to send putting metrics to GSPro? Thank you!

I have everything set up to the point where I’m trying to connect my mlm2pro to the Bluetooth connector, but it just says connected, not ready. Other times you’ll see it cycle through connecting, sending authorization, then disconnecting and then disconnected. On my MLM2PRO it’s just a flashing blue light. Not sure how to get it to be a green light so I can actually use the sim. Trying to figure out what’s wrong so any help would be appreciated, thank you!

I am having some issues connecting my MLM2 Pro. I am connected through my PC Bluetooth, entered in the web api code, and authenticated 3rd parties through the Rapsodo app. When I try to connect through the launch I get a "Triggering Discovery" message. I attempted to restart the reconnect the device, as well as toggled on and off the Bluetooth with not no luck. Any suggestions on how to get this connected?

debug error - triggering Discovery.txt

Will not connect to GSPro but connects to MLM2pro and starts up GSPro but acts like it is communicating with GSPro. What am I doing wrong.

not an issue

Im very new to this but how I find the executable file to open the connector
I see all the folders but cant find the right file to open

Thanks in advance guys

LM monitor shows up but not connected to the program. I have a bluetooth sign and another what looks like monitor sign. I have uninstalled program multiple times and have the same issue. Its like its connected but won't actually connect.

I can't get my mlm2pro to connect to my pc