2019/5/5にファームウェアをアップデートしました。
それ以前にハードウェアを作製されていた方はアップデートの必要はありませんが、
アップデートした方はビルドガイドの最終項を参照してください。

The firmware has been updated to 5/5/2019.
If you have previously created hardware, you do not need to update, but if you have updated, please refer to the last section of the build guide.

Japanese Read me

ErgoDash PCB × 2
ErgoDash Case × 2
Switch (MX-compatible and Alps switches are supported) × 66-70
Keycap × 66-70
1N4148 diode × 66-70
Arduino Pro Micro × 2
TRRS jack MJ-4PP-9 × 2
MJTP1117 switch × 2
TRRS cable × 1
Micro USB cable × 1
M2×5mm screw × 22
M2×8mm screw × 6
M2×6mm spacer × 14
Rubber feet × 8

---Option---
LED WS2812B × 24
LED 3mm × 66-70
470Ω resistor × 66-70
1kΩ resistor × 2
NchMOSFET IRLML6344TRPbF × 2

The ErgoDash uses QMK for its firmware, and the code for it is here: QMK - ErgoDash directory .

Japanese Build Guide
English Build Guide