dubstar-04 / turningaddon Goto Github PK

Add a stop in the gcode to prevent code been run on a machine

This is to work around PathOp setting the Tool Diameter

Daniel,

I would like to test your work, but I can’t seem to get the add on to appear in the path work bench.

I tried the method adding the https:\ url to the add on work bench, and I’ve tried unzipping in the Freecad/mod directory.

I’ve been following your development for a few years now. If you would like more testers, let me know how I can help.

Thanks,

Darren

The turning add-on disappears from the menu the second time the path workbench is loaded.

stock to leave property should be used in the roughing operation to define now much stock is left for a finishing pass

the maximum diameter should be populated with the actual maximum radius (not diameter) of the stock by default

also check that they are not the same value

Getting This error when selecting new Job from Path workbench:

PathJobGui.ERROR: 'Direction' Traceback (most recent call last): File "/usr/lib/freecad/Mod/Path/PathScripts/PathJobGui.py", line 1352, in Create obj.ViewObject.Proxy.editObject(obj.Stock) File "/usr/lib/freecad/Mod/Path/PathScripts/PathJobGui.py", line 199, in editObject return self.openTaskPanel('Stock') File "/usr/lib/freecad/Mod/Path/PathScripts/PathJobGui.py", line 181, in openTaskPanel self.taskPanel.setupUi(activate) File "/usr/lib/freecad/Mod/Path/PathScripts/PathJobGui.py", line 1235, in setupUi self.setupOps.setupUi() File "/usr/lib/freecad/Mod/Path/PathScripts/PathSetupSheetGui.py", line 281, in setupUi op.setupUi() File "/usr/lib/freecad/Mod/Path/PathScripts/PathSetupSheetGui.py", line 174, in setupUi prop = self.prototype.getProperty(name) File "/usr/lib/freecad/Mod/Path/PathScripts/PathSetupSheetOpPrototype.py", line 200, in getProperty return self.properties[name] KeyError: 'Direction'

This is against the latest git version (g68ad4f2f1d) of FreeCAD

Convert freeCAD file units before passing to liblathe and on return from liblathe.

• allow grooving not required for facing or parting
• finishing passes only relevant for profile operation

The edge extraction could be made much simpler and more robust.

Profiling should use some lead-in for the z direction