dropofwill / a-scanner-orderly-embed Goto Github PK

• Experiment with them
• Cut and place them in the prototyep
• Final installation

• Menu selection effect
  • Flash once and change color effect
  • Light the third of the coaster up upon selection
• Drink started effect
  • Pulse effect?
• Drink finished and on its way effect
  • Spinner effect?
• Drink delivered effect
  • Flash once and change color effect

• Breadboard protoype RGB sensor
• Prototype with model
• Final in-place prototype

• Assemble foil/plastic to form the sensor
• Prototype the touch sensor
• Prototype with 3D model
• Final prototype

• Decided on Arduino library
• Parse JSON on both ends

• RGB Sensor
• RGB LED Strip
  • If Adafruit Neopixels:
  • Transistor
  • 500 Ohm resistor
• 3D Model
• Arduino Flora
• Pressure Sensor (make it)

Out of Scope

• Battery
• Wifi/Bluetooth

• Modify model? Not necessary, but we could remove the hole on the top part
• We need a hole through the side for the usb cable and one opposite for selection button, we should probably just drill them (need to keep this in mind when setting up led strips).
• Print the two parts
• Laser or hand cut out the primitive shape from plastic or acrylic.

• Test with multiple sensors, see if their is a timing issue
• Set up the 4 states in the main loop and control the polling pace for the different sensors