This module allows to control a RD60XX via the network using Python (needs a flashed WiFi module with ESP-link or similar).

As with previous models, the RD60XX uses the Modbus protocol over serial, the registers however are different than the DPS models. The registers are described in the registers.md file.

It allows to control the following options :

• Output voltage and current
• Protection voltage and current
• Backlight
• Enable status

$ python setup.py install --user

In [1]: from rd60xx import RD60XX
In [2]: r = RD60XX(ip=10.1.2.3, port=23)
In [3]: r.set_voltage=1.8
In [4]: r.output_enable=True

Thanks to https://github.com/Baldanos/rd6006 for the register documentation and initial base for this module before heavy modifications to support modbus RTU-over-TCP and restructuring.