– Other languages

Simple application to emulate the Sony DualShock 4 gamepad using an Xbox controller or keyboard and mouse. This method is necessary for the fully work of the service Sony Playstation Now or Playstation Remote Play. Works based on the driver ViGEm.

1. Install ViGEmBus.
2. Install Microsoft Visual C++ Redistributable 2017 or newer.
3. Unpack and launch "DualShock4 emulator" (Attention! It is important to run DS4 emulator before starting PS Now, if you are using an Xbox controller, so that PSNow gives priority to the DualShock controller).
4. Launch "PlayStation Now" or other app.
5. If necessary, you can invert the axis, change the InvertX and InvertY parameters to 1 in the "Config.ini" configuration file.

• The program crashes after launch, what should I do?
"Antivirus" blocks the dynamic loading of the Xbox gamepad library, so the program crashes. You can close it for the duration of use.

The "Back/View/Select" button (the first button to the right of the left stick) on the Xbox controller emulating pressing the touchpad on a Sony DualShock 4.

The "PS Share" button is binded to the simultaneous pressing of the "Back/View/Select" and "Start/Menu" buttons or to the "F12" key.

The "PS" button is binded to the "Xbox" button, but to use it, you need to disable the use of this button in the "Xbox Game Bar" settings. Also, the "PS" button is tied to the simultaneous pressing of the "Back/View/Select" and "LB" buttons (left bumper) or the "F2" key.

You can shake (gyro) the controller by pressing "Back/View/Select" and "RB" (right bumper).

If necessary, you can swap bumpers and triggers, as well as the "share" button and pressing the touchpad, to do this change the SwapTriggersShoulders or SwapShareTouchPad parameter to 1 in the "Config.ini" configuration file.

Changing the dead zone of sticks for drifting sticks is supported. Press "ALT" + "F9" to get the values, paste them into the "Config.ini" configuration file, into the DeadZone parameters and restart the program.

On the Xbox gamepad, you need to press the "Back/View/Select" button (touchpad) and move the stick to the sides for swipes. By default, pressing the touchpad during swipes is disabled, it can be enabled in the configuration file by changing the TouchPadPressedWhenSwiping parameter to 1.

You can use swipes for the keyboard, the button codes are described below.

1. Check Windows Firewall to see if incoming connections are allowed on your network type (private) and allow if disabled.
2. Install FreePieIMU on your Android phone by taking the latest version in the OpenTrack archive or in the releases, enter the IP address of your computer, select "Send raw data", if not selected, select the data rate "Fastest" or "Fast".
3. Reduce the sensitivity if necessary (the Sens parameter, in the Motion section, where 100 is 100% sensitivity) in configuration file.
4. Invert the axes if necessary (the parameters InverseX, InverseY and InverseZ, in the Motion section, where 1 is turning on the inversion, and 0 is turning off).

If you just need to shake (gyro) the gamepad in the game, then there is no need to install Android applications, just press the "shake" button of the gamepad.

By default, the mouse and keyboard only work in the windows "PlayStation™Now" and "PS4 Remote Play" (change the ActivateOnlyInWindow2 parameter to your regional application title). To work only in any other applications or emulators, change the parameters ActivateOnlyInWindow and ActivateOnlyInWindow2 to the headers of these applications You can enable the work in all windows (change the ActivateInAnyWindow parameter to 1, in the "Config.ini" configuration file) or change the name of the window (the ActivateOnlyInWindow parameter) in which the actions are captured. This is necessary so that the cursor is centered only in one window and no buttons are pressed when the window is minimized.

To disable cursor centering, hold down the "C" button (can change it in the config - StopСenteringKey).

To hide the cursor after startup, change HideCursorAfterStart to 1, to restore the cursor, close the program by pressing "ALT" + "ESCAPE" or "~".

For full-screen Playstation Now use the keys "ALT" + "F10", the upper black bar, as well as the taskbar will be hidden. To return to the normal window, press these keys again. You can disable hiding the taskbar in the configuration file by changing the HideTaskBarInFullScreen parameter to 0. If the Playstation Now window changes once, you can change the default top offset, the FullScreenTopOffset parameter.

Сan replace button bindings in the "Config.ini" configuration file. Button codes can be found here.

The sensitivity parameters SensX, SensY for the mouse can also be found in the configuration file "Config.ini", in the section "Mouse". If there is no stick movement, you can try increasing the "SleepTimeOut" parameter to 2, 4, 8, 10.

You can also enable emulation of analog triggers (L2, R2), change the EmulateAnalogTriggers parameter to 1, and increase step AnalogTriggerStep (from 0.1 to 255).

Version for Windows 10.

Download

Fork with support for reading gyroscope data from Nintendo Joy-Con - More detailed.

r57zone[at]gmail.com