NSAP-1 is an computational architecture that builds upon the principles of the SAP-1 (Simple as Possible) computer but introduces higher complexity and functionality. This is a personal project with the intention of just learning about computers architectures.

• Full 8-bit Memory Address: Unlike SAP-1's limited 4-bit address space, NSAP-1 boasts a full 8-bit memory address, enabling access to 256 memory locations.
• Extended Instruction Set: With a full 8-bit instruction register, NSAP-1 can perform 256 different instructions, a significant leap from SAP-1's 16 instructions.
• Efficient Instruction Cycles: Each instruction executes in at most 8 cycles, with a minimum of 2 cycles (fetch address from Program Counter and fetch information from RAM).
• Video Processing Unit A rudimentary video processing unit is currently in development. It operates as a separate ALU for video registers.

• Video Processing: Plans are in place to further develop the video processing capabilities.
• Stack Implementation: A stack will be added to enhance the computational operations and memory management.
• Flags: There are plans for adding flags(such as overflow, equality, etc.), which will be fundamental for conditional jump instructions.

• The ALU operations require pre-loading the information register B before executing the ALU instruction.
• The result of an operation is stored in a dedicated ALU result register, not in the accumulator (Register A).

To work with NSAP-1, you will need:

• Logisim Evolution: An educational tool for designing and simulating digital logic circuits.
• VHDL Simulator: A tool like Altera ModelSim must be installed on your machine and linked to Logisim Evolution to simulate VHDL designs.

First you will need to add the VHDL simulator to your logisim evolution, and to do it you go to Edit->Preferences->Software and at your simulator path to Quest Advanced Simulator Path. If you have quartus prime lite, then you path would be something like C:\intelFPGA_lite<version>\modelsim_ase\win32aloem (change for your quartus prime version, like 20.1). After doing so, you open the SAP1Evolution.circ, activate Simulate(Top bar)->VHDL Simulation Enabled, then go Simulate(Beside Design) and click on the first clock icon, this will start the clock. After that you just need to click the computer Reset button.

To load programs to the computer you need to write them directly to the ram. To do so you will right click the ram->Edit Contents->Open and then select the program file that you can generate with the assembler. You can also manually edit it if you really want.

The project includes a C# assembler that allows you to create programs that can be loaded directly into the NSAP-1's RAM. When you run the assembler, you just need to type the assembly code file name, that should be on the same folder as the assembler executable. Documentation for the assembler is pendent.

The documentation process is ongoing. We aim to provide comprehensive information to help you understand and contribute to the project effectively. There is an Google Sheets table listing the current instructions at https://docs.google.com/spreadsheets/d/1OhQx1rbJFWxC1zU1svIcuST1hLUuEzyAFOE7Zm_RUqI/edit#gid=501750655

We welcome contributions and suggestions! Feel free to fork the repository, create a feature branch, and submit your pull requests for review.

This README is a work in progress, as is the NSAP-1 project itself. Stay tuned for updates and enhancements!