Simple Home Assistant component to add/control Sonoff/eWeLink smart devices using the stock firmware and retaining the cloud capabilities.

CHECK COMPATIBILITY LIST BELOW (not everyday updated)! TRY THE COMPONENT FIRST AND IF IT DOESN'T WORK FOR YOUR DEVICE DON'T COMPLAIN AND OPEN A PROPER ISSUE

To setup add to your configuration.yaml:

sonoff:
  username: [email or phone number]
  password: [password]
  scan_interval: 60 #(optional, lower values than 60 won't work anymore!)
  grace_period: 600 #(optional)
  api_region: 'eu' #(optional)
  entity_prefix: True #(optional)
  debug: False #(optional)

And copy the *.py files in custom_components folder using the same structure like defined here:

 custom_components
    └── sonoff
        └── __init__.py
        └── switch.py
        └── sensor.py

email [Deprecated] used only for compatibility, may be eliminated in future.

username the username that you registered for ewelink account be it an email or a phone number (the phone number should lead with region number, '+8612345678901' for example).

scan_interval you can define how fast the state of devices is refreshed (by default every 60sec). for example if you change the switch from an external source like Alexa or Google Home the change will show up in HA in maximum less than specified period, while changing it using HA interface/actions/etc it's instantly

grace_period eWeLink app allows only one active session at a time, therefore this will temporarily block HA refreshes for the specified amount (in seconds) to allow (or better said after) you to login in the app and do required changes to your devices. following that sonoff component does an internal re-login invalidating the mobile session and the process restarts. (as a workaround for this, you can create a 2nd account and share the devices from main one, therefore one will be used in HA another one in mobile app)

api_region this component tries to find, login & connect to the proper region assigned to you. specifying a proper region will help the component to load faster and reconnect after the expired grace period explained above, possible values: eu (default), us, as or cn

entity_prefix this option removes the sonoff_ prefix from entities name (it's more or a less a compatibility mode between previous master vs websocket branch implementations)

debug if enabled this will give you the ability to generate a log of messages from ewelink that can be easily posted here to debug/implement new devices.

steps and how it works:

• this option creates a pseudo switch entity switch.sonoff_debug (notice it won't show up automatically in frontend in lovelace you have to manually add it or toggle it from Developer tools > Services section).
• to generate a sonoff debug log toggle the pseudo-switch ON and the capture of messages will silently start in the background. now pick up the phone -> open eWeLink app and start changing settings of your Sonoff device but not faster than 10+ seconds between each change.
• when you finish toggle the pseudo-switch OFF and a new (very long) persistent notification will show up.
• go to Developer tools > States section and look for a persistent_notification.notification entity (impossible to miss due to its extremely long attribute text) and copy the message from there (to remove this notifications and others just push the button Dismiss them from main HA notifications area and you can restart the process and generate a new log if needed).

INFORMATION: it'll be better if you share the device-to-debugged to a 2nd eWeLink account and use this in HA and main account in mobile app, this way you won't be logged out of the app anymore and the generated log will be restricted to only 1 device

NOTICE: you should NOT leave debug-mode enabled for everyday use, please please just don't!

This is just a proof of concept because I searched for it and there was no implementation to use Sonoff/eWeLink devices without flashing them. (althought I know how to do it, I don't have a real extensive usage for now and I prefer to keep them on stock firmware).

yes = confirmed version, [empty] = unknown for sure

• 2019.04.08
  • HA0.88+ new component structure
  • added basic rules to create the same number of switches as presented by the physical device
• 2019.02.++ alternate faster version with state updates over websocket developed
• 2019.01.06 create sensors for devices that have support for power/current/voltage/temperature/humidity
• 2018.12.05
  • mandarin phone number login support
  • removed entity_name option, the entities will have a fixed structure from now on
• 2018.12.01
  • ability to control devices with multiple switches
  • added mobile app specified device-name as default to be listed in HA entity, added entity_name option and removed the default sonoff_ prefix
  • fixed bug that will show device as unavailable in the grace period
• 2018.11.29 shared devices from another account can be used also
• 2018.11.28
  • mobile app-like login to the closest region
  • added scan_interval option
  • added grace_period option

Feel free to properly ask support for new devices using the guidelines mentioned in the section above regarding the debug section (or the older basic version) / report bugs / request features / fork (& pull request) and I'll try to see what I can do.

• most of the logic & code was done (partially) porting this awesome repo (+those that it extends itself) https://github.com/howanghk/homebridge-ewelink
• @2016for for assisting me with properly integrating the switches with multiple outlets
• @fireinice for providing the mandarin implementation
• @SergeyAnokhin for adding power meter info to entity attributes
• @difelice for debugging support

• @Michaelrch
• @daboshman
• @primalnow

Feel free to help me invest in more devices to test and add faster new features to this component!