binding wltoys with v202 protocol about deviation HOT 1 CLOSED

It works OOTB!

Is just the 10428 rc car has an old ESC+Controller.

I opened the car case (honestly to collect all parts I need to replace) and discover a few things:

• Switch: So you can start/stop car with battery connected (Never understand why it doesn't have a switch)
  -Two servos?: One for direction, but the other? I discover car is geared, so you have two velocities (torque/speed)
• ESC: Integrated controller and ESC on same board
• Leds: Looks there are two connectors for leds, only one is in use (exposing bindings). I tried the empty red and is a permanent on led (I suppose for those led bar upgrades):

• bind button: You need to press this button to bind another transmitter. When you switch on controller, leds blink twice (waiting for transmitter to switch on). If you press this button for 5 seconds, ligth blinks only once slowly, waiting for pairing.

I use T8SG to pair (V202 protocol) and it works. Default mapping is:

So to drive car, you should use:

• left+bottom (diagonal) for torque forward,
• right+bottom for speed forward
• left+top for torque backward,
• right+top for speed backward

from deviation.