Comments (7)
adriweb
commented on July 18, 2024
Looks like you forgot some things (probably either setting the pkg config thing in your bash_profile (or equivalent), or the libiconv for linkage from brew if that's even still possible).
Regarding homebrew cask, there is one actually :) Juju made one, its on his github. Might not be published directly though, I'm not sure.
from tilp_and_gfm.
acagliano
commented on July 18, 2024
Edit2: What is the link to the Cask?
Well, now I have an update: I was able to get it fully installed, but now I get this during runtime, with sudo. It does not detect the calculator at all, says "cannot open resource" and says perhaps to check the permissions on the libs.
tilp-INFO: 21:13:17.647: Opening cable null on port #2 to communicate with calculator TI84+CE USB
ticalcs-INFO: 21:13:23.440: Checking hand-held status:
ticalcs-INFO: 21:13:23.440: PC->TI: Buffer Size Request (1024 bytes)
(tilp:27386): ticalcs-WARNING **: 21:13:23.440: Raw packet is unexpectedly large: 3976101632 bytes
(tilp:27386): ticalcs-CRITICAL **: 21:13:23.440: Raw packet is too large: 3976101632 bytes
ticalcs-INFO: 21:13:23.440: Checking hand-held status:
ticalcs-INFO: 21:13:23.440: PC->TI: Buffer Size Request (1024 bytes)
(tilp:27386): ticalcs-WARNING **: 21:13:23.440: Raw packet is unexpectedly large: 3976101632 bytes
(tilp:27386): ticalcs-CRITICAL **: 21:13:23.440: Raw packet is too large: 3976101632 bytes
ticalcs-INFO: 21:13:26.475: Checking hand-held status:
ticalcs-INFO: 21:13:26.475: PC->TI: Buffer Size Request (1024 bytes)
(tilp:27386): ticalcs-WARNING **: 21:13:26.475: Raw packet is unexpectedly large: 3976101632 bytes
(tilp:27386): ticalcs-CRITICAL **: 21:13:26.475: Raw packet is too large: 3976101632 bytes
ticalcs-INFO: 21:13:26.475: Checking hand-held status:
ticalcs-INFO: 21:13:26.475: PC->TI: Buffer Size Request (1024 bytes)
(tilp:27386): ticalcs-WARNING **: 21:13:26.475: Raw packet is unexpectedly large: 3976101632 bytes
Trying to follow some of the setup for non-root user now.
Edit: Same result
from tilp_and_gfm.
debrouxl
commented on July 18, 2024
Is cable null on port #2 to communicate with calculator TI84+CE USB what TILP (libticalcs) detected automatically ? If you're really using a 84+CE, and it's the only TI graphing calculator plugged into your computer, change your settings to the more expected cable DirectLink and port 1, and try again.
Given the above, I'd like you to make explicit your calculator model, cable model and OS version running on the calculator: I know you from other sites, but you made ASM programs for both monochrome TI-Z80 and the TI-eZ80 series :)
3976101632 = 0xECFE7F00, which is a weird value, even in the other endianness, but libticalcs uses the appropriate one, otherwise more people, starting with Adriweb, would certainly have complained.
from tilp_and_gfm.
acagliano
commented on July 18, 2024
When I do this, it says “unable to open device”. I’m convinced that this is some sort of library error or something. Since I did part of the installation with Homebrew, and part of it manually.
How would I set up a homebrew tap or cask for this? Or what’s the link to the existing one? I feel doing the whole install in a consistent way would be better.
…Sent from my iPhone
On Aug 26, 2019, at 1:43 AM, Lionel Debroux ***@***.***> wrote:
Is cable null on port #2 to communicate with calculator TI84+CE USB what TILP (libticalcs) detected automatically ? If you're really using a 84+CE, and it's the only TI graphing calculator plugged into your computer, change your settings to the more expected cable DirectLink and port 1, and try again.
Given the above, I'd like you to make explicit your calculator model, cable model and OS version running on the calculator: I know you from other sites, but you made ASM programs for both monochrome TI-Z80 and the TI-eZ80 series :)
3976101632 = 0xECFE7F00, which is a weird value, even in the other endianness, but libticalcs uses the appropriate one, otherwise more people, starting with Adriweb, would certainly have complained.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub, or mute the thread.
from tilp_and_gfm.
adriweb
commented on July 18, 2024
Well, homebrew should only be used to install the deps, then the install script or the cmake line is used to build libti* and tilp.
The install script says which brew command to use and which exports to add regarding pkgconfig so that the deps gets found properly.
Anyway, we can probably help you on irc directly
from tilp_and_gfm.
acagliano
commented on July 18, 2024
Turns out I was trying to use a USB power-only cable. Works fine when I use the correct cable.
Genius Level: Expert.
Thanks for the help, anyway.
from tilp_and_gfm.
debrouxl
commented on July 18, 2024
Eh, don't worry... mistakes happen :)
Obtaining the USB devices list from MacOS X was probably one of the next debugging steps (and may be what you did yourself); if the calculator had already been undetected at the OS level, you'd have looked at the physical components of the connection to the computer, anyway.
from tilp_and_gfm.
Related Issues (20)
- TI83F header comment cutoff? HOT 10
- trying to transfer MirageOs produces an issue stating "Invalid Parameter" HOT 3
- Free software license HOT 3
- Build fails on Manjaro: Can't exec "aclocal": No such file or directory at /usr/share/autoconf/Autom4te/FileUtils.pm line 274. HOT 4
- Double-clicking empty device list causes Segmentation fault HOT 3
- Errors connecting to TI-84 Plus CE HOT 6
- Updating an app with TiLP hangs & times out while calculator is on "Defragmenting" screen HOT 2
- Unable to restore CRASH.82B file to TI-82 on tilp HOT 1
- Feature Request: Dark Theme HOT 3
- File transfer (TX) does not work on TI-92: Files never actually save to the device. HOT 2
- Win32: The procedure entry point deflateSetHeader could not be located in the dynamic link library libgio-2.0-0.dll
- ./install_tilp.sh fails on OSX Ventura 13.3 HOT 3
- ./install_tilp.sh fails on OSX Ventura 13.3 ARM HOT 2
- Cannot download specific variables from TI-92 II HOT 1
- [GFM] macOS: segfault on gtk_file_chooser_set_current_name
- dependency libglade2-0 will be removed from Debian: deprecated and unmaintained upstream HOT 3
- Transmission error on sending large files to TI85 using Silver-link on Ubuntu linux 22.04
- Tilp: Coredump on unsupported library versions HOT 4
- CMake Does not install Desktop Files HOT 8
- GTK3 branch builds GTK2 by default HOT 2
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from tilp_and_gfm.