Driver for the Xbox/ Xbox 360/ Xbox 360 Wireless/ Xbox One Controllers

• controller LEDs and Force Feedaback now works even after suspend/ resume
• LED and Force Feedback packets are now re-submitted instead of being dropped
  • also fixes kernel warnings due to submitting active URB requests
• only expose actually connected Xbox 360 Wireless Controllers (patch by Pierre-Loup A. Griffais)
• updated Xbox One controller force feedback (patch by Pierre-Loup A. Griffais)
• Xbox 360 Wireless button mappings are now compatible with Xbox 360 (non-wireless) mappings
• added support for Xbox One Covert Forces Edition (Patch by Erik Lundgren)
• fixed support for Razer Atrox Arcade Stick (Patch by Dario Scarpa)

sudo git clone https://github.com/paroj/xpad.git /usr/src/xpad-0.4
sudo dkms install -m xpad -v 0.4

cd /usr/src/xpad-0.4
sudo git fetch
sudo git checkout origin/master
sudo dkms remove -m xpad -v 0.4 --all
sudo dkms install -m xpad -v 0.4

sudo dkms remove -m xpad -v 0.4 --all
sudo rm -rf /usr/src/xpad-0.4

This driver creates three devices for each attached gamepad

1. /dev/input/jsN
   • example jstest /dev/input/js0
2. /sys/class/leds/xpadN/brightness
   • example echo COMMAND > /sys/class/leds/xpad0/brightness where COMMAND is one of
     • 0: off
     • 1: all blink, then previous setting
     • 2: 1/top-left blink, then on
     • 3: 2/top-right blink, then on
     • 4: 3/bottom-left blink, then on
     • 5: 4/bottom-right blink, then on
     • 6: 1/top-left on
     • 7: 2/top-right on
     • 8: 3/bottom-left on
     • 9: 4/bottom-right on
     • 10: rotate
     • 11: blink, based on previous setting
     • 12: slow blink, based on previous setting
     • 13: rotate with two lights
     • 14: persistent slow all blink
     • 15: blink once, then previous setting
3. the generic event device
   • example fftest /dev/input/by-id/usb-*360*event*

As a regular unpriveledged user

Setup console to display kernel log.
dmesg --level=debug --follow

Open a new console and access the device with jstest.
jstest /dev/input/jsX

Interact with the device and observe that data packets recieved from device are printed to kernel log.

[ 3968.772128] xpad-dbg: 00000000: 20 00 b5 0e 00 00 00 00 00 00 0c 03 04 fd 6c 01 40 fe 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3968.772135] xpad-dbg: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3968.804137] xpad-dbg: 00000000: 20 00 b6 0e 00 00 00 00 00 00 0c 03 04 fd 6c 01 fc fd 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3968.804145] xpad-dbg: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3969.152120] xpad-dbg: 00000000: 20 00 b7 0e 00 00 00 00 00 00 0c 03 04 fd 6c 01 b8 fd 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3969.152129] xpad-dbg: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Save dmesg buffer and attach to bug report, don't forget to describe button sequences in bug report.
dmesg --level=debug > dmesg.txt

Ctrl+C to close interactive console sessions when finished.

1. git format-patch --cover-letter upstream..master
2. git send-email --to xxx *.patch