dans98 / glapse Goto Github PK

@dans98 I tried to set up gLapse, but without success. I can only follow instructions as a non coder, I need some help with troubleshooting…

So I followed the installation points precisely as described here in order. Even tried with a completely fresh raspbian image on a new SD card, but I het the following error

:

What am I doing wrong? I modified the setting according to my IP and pw, otherwise I ran it with the stock settings. I have an updated RPi 4B with a cloned V2 Pi camera from this vendor: https://www.aliexpress.com/item/33053692639.html?spm=a2g0o.productlist.0.0.46ed659f9ySinD&algo_pvid=0ccf4d8e-71ba-461f-b951-ba3b7d8abbfe&algo_exp_id=0ccf4d8e-71ba-461f-b951-ba3b7d8abbfe-15&pdp_ext_f=%7B%22sku_id%22%3A%2267439351246%22%7D

Thank you for your help!

@dans98 Thank you for this script, I really like the idea behind it.
My only "problem" comes from the limitation with the pi camera itself, that I have to choose whether I want a timelapse or use and other program to stream a live video to monitor the printer.
I am not a programmer, so sorry if my request is not make sense...
But would it be possible to extend the functionality of this program in a way that it would stream a the last captured static image to the local network? So I would be able to monitor the printer at the same time, even only with static images.

Best regards