rsimsum
is an R package that can compute summary statistics from
simulation studies. rsimsum
is modelled upon a similar package
available in Stata, the user-written command simsum
(White I.R.,
2010).
The aim of rsimsum
is to help to report simulation studies, including
understanding the role of chance in results of simulation studies: Monte
Carlo standard errors and confidence intervals based on them are
computed and presented to the user by default. rsimsum
can compute a
wide variety of summary statistics: bias, empirical and model-based
standard errors, relative precision, relative error in model standard
error, mean squared error, coverage, bias. Further details on each
summary statistic are presented elsewhere (White I.R., 2010; Morris et
al, 2019).
The main function of rsimsum
is called simsum
and can handle
simulation studies with a single estimand of interest at a time. Missing
values are excluded by default, and it is possible to define boundary
values to drop estimated values or standard errors exceeding such
limits. It is possible to define a variable representing methods
compared with the simulation study, and it is possible to define by
factors, that is, factors that vary between the different simulated
scenarios (data-generating mechanisms, DGMs). However, methods and DGMs
are not strictly required: in that case, a simulation study with a
single scenario and a single method is assumed. Finally, rsimsum
provides a function named multisimsum
that allows summarising
simulation studies with multiple estimands as well.
An important step of reporting a simulation study consists in
visualising the results; therefore, rsimsum
exploits the R package
ggplot2
to produce a
portfolio of opinionated data visualisations for quick exploration of
results, inferring colours and facetting by data-generating mechanisms.
rsimsum
includes methods to produce (1) plots of summary statistics
with confidence intervals based on Monte Carlo standard errors (forest
plots, lolly plots), (2) zipper plots to graphically visualise coverage
by directly plotting confidence intervals, (3) plots for method-wise
comparisons of estimates and standard errors (scatter plots,
Bland-Altman plots, ridgeline plots), and (4) heat plots. The latter is
a visualisation type that has not been traditionally used to present
results of simulation studies, and consists in a mosaic plot where the
factor on the x-axis is the methods compared with the current simulation
study and the factor on the y-axis is the data-generating factors. Each
tile of the mosaic plot is coloured according to the value of the
summary statistic of interest, with a red colour representing values
above the target value and a blue colour representing values below the
target.
Installation
You can install rsimsum
from CRAN:
install.packages("rsimsum")
Alternatively, it is possible to install the development version from
GitHub using the remotes
package:
# install.packages("remotes")
remotes::install_github("ellessenne/rsimsum")
Example
This is a basic example using data from a simulation study on missing
data (type help("MIsim", package = "rsimsum")
in the R console for
more information):
library(rsimsum)
data("MIsim", package = "rsimsum")
s <- simsum(data = MIsim, estvarname = "b", true = 0.5, se = "se", methodvar = "method", x = TRUE)
#> 'ref' method was not specified, CC set as the reference
s
#> Summary of a simulation study with a single estimand.
#> True value of the estimand: 0.5
#>
#> Method variable: method
#> Unique methods: CC, MI_LOGT, MI_T
#> Reference method: CC
#>
#> By factors: none
#>
#> Monte Carlo standard errors were computed.
We set x = TRUE
as it will be required for some plot types.
Summarising the results:
summary(s)
#> Values are:
#> Point Estimate (Monte Carlo Standard Error)
#>
#> Non-missing point estimates/standard errors:
#> CC MI_LOGT MI_T
#> 1000 1000 1000
#>
#> Average point estimate:
#> CC MI_LOGT MI_T
#> 0.5168 0.5009 0.4988
#>
#> Median point estimate:
#> CC MI_LOGT MI_T
#> 0.5070 0.4969 0.4939
#>
#> Average variance:
#> CC MI_LOGT MI_T
#> 0.0216 0.0182 0.0179
#>
#> Median variance:
#> CC MI_LOGT MI_T
#> 0.0211 0.0172 0.0169
#>
#> Bias in point estimate:
#> CC MI_LOGT MI_T
#> 0.0168 (0.0048) 0.0009 (0.0042) -0.0012 (0.0043)
#>
#> Empirical standard error:
#> CC MI_LOGT MI_T
#> 0.1511 (0.0034) 0.1320 (0.0030) 0.1344 (0.0030)
#>
#> % gain in precision relative to method CC:
#> CC MI_LOGT MI_T
#> 0.0000 (0.0000) 31.0463 (3.9375) 26.3682 (3.8424)
#>
#> Mean squared error:
#> CC MI_LOGT MI_T
#> 0.0231 (0.0011) 0.0174 (0.0009) 0.0181 (0.0009)
#>
#> Model-based standard error:
#> CC MI_LOGT MI_T
#> 0.1471 (0.0005) 0.1349 (0.0006) 0.1338 (0.0006)
#>
#> Relative % error in standard error:
#> CC MI_LOGT MI_T
#> -2.6594 (2.2049) 2.2233 (2.3318) -0.4412 (2.2690)
#>
#> Coverage of nominal 95% confidence interval:
#> CC MI_LOGT MI_T
#> 0.9430 (0.0073) 0.9490 (0.0070) 0.9430 (0.0073)
#>
#> Bias-eliminated coverage of nominal 95% confidence interval:
#> CC MI_LOGT MI_T
#> 0.9400 (0.0075) 0.9490 (0.0070) 0.9430 (0.0073)
#>
#> Power of 5% level test:
#> CC MI_LOGT MI_T
#> 0.9460 (0.0071) 0.9690 (0.0055) 0.9630 (0.0060)
Vignettes
rsimsum
comes with 5 vignettes. In particular, check out the
introductory one:
vignette(topic = "A-introduction", package = "rsimsum")
The list of vignettes could be obtained by typing the following in the R console:
vignette(package = "rsimsum")
Visualising results
As of version 0.2.0
, rsimsum
can produce a variety of plots: among
others, lolly plots, forest plots, zipper plots, etc.:
library(ggplot2)
autoplot(s, type = "lolly", stats = "bias")
autoplot(s, type = "zip")
With rsimsum
0.5.0
the plotting functionality has been completely
rewritten, and new plot types have been implemented:
- Scatter plots for method-wise comparisons, including Bland-Altman type plots;
autoplot(s, type = "est_ba")
#> `geom_smooth()` using formula 'y ~ x'
- Ridgeline plots.
autoplot(s, type = "est_ridge")
#> Picking joint bandwidth of 0.0295
Nested loop plots have been implemented in rsimsum
0.6.0
:
data("nlp", package = "rsimsum")
s.nlp <- rsimsum::simsum(
data = nlp, estvarname = "b", true = 0, se = "se",
methodvar = "model", by = c("baseline", "ss", "esigma")
)
#> 'ref' method was not specified, 1 set as the reference
autoplot(s.nlp, stats = "bias", type = "nlp")
Finally, as of rsimsum
0.7.1
contour plots and hexbin plots have
been implemented as well:
autoplot(s, type = "est_density")
#> `geom_smooth()` using formula 'y ~ x'
autoplot(s, type = "est_hex")
#> `geom_smooth()` using formula 'y ~ x'
They provide a useful alternative when there are several data points with large overlap (e.g. in a scatterplot).
The plotting functionality now extend the S3 generic autoplot
: see
?ggplot2::autoplot
and ?rsimsum::autoplot.simsum
for further
details.
More details and information can be found in the vignettes dedicated to plotting:
vignette(topic = "C-plotting", package = "rsimsum")
vignette(topic = "D-nlp", package = "rsimsum")
Citation
If you find rsimsum
useful, please cite it in your publications:
citation("rsimsum")
#>
#> To cite the rsimsum package in publications, please use:
#>
#> Gasparini, (2018). rsimsum: Summarise results from Monte Carlo simulation studies.
#> Journal of Open Source Software, 3(26), 739, https://doi.org/10.21105/joss.00739
#>
#> A BibTeX entry for LaTeX users is
#>
#> @Article{,
#> author = {Alessandro Gasparini},
#> title = {rsimsum: Summarise results from Monte Carlo simulation studies},
#> journal = {Journal of Open Source Software},
#> year = {2018},
#> volume = {3},
#> issue = {26},
#> pages = {739},
#> doi = {10.21105/joss.00739},
#> url = {https://doi.org/10.21105/joss.00739},
#> }
References
- White, I.R. 2010. simsum: Analyses of simulation studies including Monte Carlo error. The Stata Journal 10(3): 369-385 <https://www.stata-journal.com/article.html?article=st0200>
- Morris, T.P., White, I.R. and Crowther, M.J. 2019. Using simulation studies to evaluate statistical methods. Statistics in Medicine, <doi:10.1002/sim.8086>
- Gasparini, A. 2018. rsimsum: Summarise results from Monte Carlo simulation studies. Journal of Open Source Software, 3(26):739 <10.21105/joss.00739>