Comments (12)
LukasFreeze
commented on August 25, 2024
Moritz suggested a frame consisting of dimensional lumber for the table structure. If we make sure the wooden frame is in line with the aluminum extrusions of the machine's frame we might not even need a tabletop! That would save quite a bit of money.
from do-something.
LukasFreeze
commented on August 25, 2024
started a (very basic) wiki page: CNC Router
from do-something.
Pakue95
commented on August 25, 2024
@emka and I finished the router yesterday and it works so far nicely. The cables are not yet cut to length and should receive some ring terminals. A final adjustment of the frame and rollers should be done once the machine is on it’s table.
from do-something.
Pakue95
commented on August 25, 2024
The current plan for the table is to use 3 of the workbenches from Bauhaus, bolt them together and mount the third one on the wall. This should result in a quick and stable table for the router.
We can either wait for the tables from EMBL to arrive and replace the tables in the CoMaker room with them, or just take out 3 and get the router up and running quicker.
In case we need the tables later again the DIY table option is still on the table (pun partially intended)...
from do-something.
LukasFreeze
commented on August 25, 2024
I would say the router should be the top priority.
How about taking the front left and both middle CoMaking benches, and
bringing in one of the self-built common room tables for the time before
the EMBL tables arrive? That would also make the common room a bit more
open, I think there are too many tables right now (blocking screws and
future locker locations)
…On Feb 15, 2018 1:05 AM, "Patrick" ***@***.***> wrote:
The current plan for the table is to use 3 of the workbenches from
Bauhaus, bolt them together and mount the third one on the wall. This
should result in a quick and stable table for the router.
We can either wait for the tables from EMBL to arrive and replace the
tables in the CoMaker room with them, or just take out 3 and get the router
up and running quicker.
—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
<#8 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AS1za7BBXkrHHX_uFHInPdg9ccAzFYygks5tU3TYgaJpZM4RIydJ>
.
from do-something.
Pakue95
commented on August 25, 2024
Sounds good to me.
… Am 15.02.2018 um 10:07 schrieb Lukas ***@***.***>:
I would say the router should be the top priority.
How about taking the front left and both middle CoMaking benches, and
bringing in one of the self-built common room tables for the time before
the EMBL tables arrive? That would also make the common room a bit more
open, I think there are too many tables right now (blocking screws and
future locker locations)
On Feb 15, 2018 1:05 AM, "Patrick" ***@***.***> wrote:
> The current plan for the table is to use 3 of the workbenches from
> Bauhaus, bolt them together and mount the third one on the wall. This
> should result in a quick and stable table for the router.
>
> We can either wait for the tables from EMBL to arrive and replace the
> tables in the CoMaker room with them, or just take out 3 and get the router
> up and running quicker.
>
> —
> You are receiving this because you commented.
> Reply to this email directly, view it on GitHub
> <#8 (comment)>,
> or mute the thread
> <https://github.com/notifications/unsubscribe-auth/AS1za7BBXkrHHX_uFHInPdg9ccAzFYygks5tU3TYgaJpZM4RIydJ>
> .
>
—
You are receiving this because you were assigned.
Reply to this email directly, view it on GitHub <#8 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AS1jNr6iF3vtUJ3Uc3cAgHkxcilqXfe6ks5tU_PUgaJpZM4RIydJ>.
from do-something.
Pakue95
commented on August 25, 2024
Table is now build and the router is in place. I designed some part to level the frame on the table. If any of you is in the space for 2 hours you could start the print. It is on P3 in my folder called RouterLevel.
from do-something.
sbillaudelle
commented on August 25, 2024
Yesterday, I shortened most of the wires and routed them more cleanly.
I will try to extend the router's cable tomorrow or on Sunday. Maybe I will manage to mount the waste board and level the whole thing. We'll see…
from do-something.
emka
commented on August 25, 2024
Waste board is attached. We realized that we really need dust collection from the start.
from do-something.
emka
commented on August 25, 2024
Universal Gcode Sender 2.0 (stable nightly) works well.
We build a basic dust collection that works with the vacuum cleaner attached. Splitting out the cyclone dust separator in a separate issue.
from do-something.
Chris0812
commented on August 25, 2024
The Homing does not work properly: The Z-endstop doesn't seem to trigger
from do-something.
NitramLegov
commented on August 25, 2024
I moved the comment from @Chris0812 to a new issue: #62 since this issue here was already closed and I don´t think we should reopen it.
from do-something.
Related Issues (20)
- undichte Decke im "Lager-Gang" HOT 2
- Third (and last) WordClock Workshop HOT 1
- Tiefenanschlag Scheppach DP 16SL ersetzen HOT 4
- Workbee CNC: Wrong settings HOT 1
- Belt and Disc Sander: Disk Sander Needs Repair! HOT 5
- Formatkreissäge nutzbar machen HOT 9
- Ersatz für das 16er Bandsägeblatt HOT 1
- Workbee CNC (COMS00003) Broken controller HOT 12
- Lasercutter-Arbeitsfläche ist nicht parallel zur Optik HOT 1
- Raumbox HOT 10
- Autodesk Fusion Seminar 2024-4-3 HOT 3
- Umrüstung der CMI-Bandsäge zum Bandschleifer HOT 3
- Anleitungsvideos für Wiki-Grundlagen HOT 2
- Wiki-Suche auf "Project"-Namespace erweitern HOT 1
- MK3 shows thermal runaway error HOT 4
- Seminar: Einführung in die Slicer, Orca und Prusa Slicer HOT 3
- Scroll Saw/Dekupiersäge is broken HOT 3
- Bambu Lab P1S: Überhitzung des Bauraums HOT 3
- Fusion 360 Seminar für Einsteiger/Anfänger HOT 2
- "neue" Laser-Absaugung HOT 2
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from do-something.