FreeRTOS is a real time operation system for embedded systems. It is widely used on ARM based microprocessor boards. Jailhouse is a partitioning Hypervisor based on Linux. For more information on both systems refer to the corresponding web pages.

This project aims at getting both systems run together on a multicore ARM processor system. It allows to combine the general purpose OS Linux with a hard real time OS. Both systems are almost isolated from each other by the underlying hypervisor.

• At the moment the system runs only on a Banana Pi board
• Make sure Jailhouse is running correctly on this board. Installation instructions can be found here.
• A working cross compiler toolchain for your target platform

First of all clone this repository

FREERTOS_CELL_DIR=$HOME/freertos-cell
git clone https://github.com/siemens/freertos-cell.git $FREERTOS_CELL_DIR

Let's assume your Jailhouse sources reside in the directory

JAILHOUSE_DIR=$HOME/jailhouse

then do the following to build new cell description files for the hypervisor

1. Root cell description

      cp $FREERTOS_CELL_DIR/jailhouse-configs/bananapi.c $JAILHOUSE_DIR/configs/arm/
   

2. RTOS cell description

      cp $FREERTOS_CELL_DIR/jailhouse-configs/bananapi-freertos-demo.c $JAILHOUSE_DIR/configs/arm/
   

3. Rebuild your jailhouse subsystem. In the directory "$JAILHOUSE_DIR/configs/arm" you will get two new files which are used in the next step.

4. Setup your jailhouse instances

This step has to be executed on the ARM target. You have to transfer the cell files to the target machine.

      jailhouse enable $JAILHOUSE_DIR/configs/arm/bananapi.cell
      jailhouse cell create $JAILHOUSE_DIR/configs/arm/bananapi-freertos-demo.cell

The build system assumes that your cross compiler prefix is "arm-linux-gnueabihf-". If this condition is true then you simply do

cd $FREERTOS_CELL_DIR
make

If your cross compiler prefix is something different then you can build the whole by invoking

cd $FREERTOS_CELL_DIR
make CROSS_COMPILE='xxx-yyy-zzz-'

It is also possible to build the code directly on the target machine by doing the following

cd $FREERTOS_CELL_DIR
make CROSS_COMPILE=''

Now you are ready to start your FreeRTOS demo under the hypervisor. Once again this step has to be executed on the ARM target.

jailhouse cell load FreeRTOS $FREERTOS_CELL_DIR/freertos-demo.bin
jailhouse cell start FreeRTOS

After performing these 2 steps you should get some output from the FreeRTOS demo application on the second serial interface (baudrate: 115200) of the Banana Pi board.

Moreover the green LED on the board should start to blink.

The first serial interface is used by the hypervisor and Linux.

If you plan to get the whole system running on other hardware bases you have to take into consideration the following items:

• Modify the serial interface access
• Your hardware needs a GIC (Generic Interrupt Controller) module
• Of course you need a SoC with virtualization support
• It must be possible to switch the CPUs online/offline