christoph2 / genibus Goto Github PK

View Code? Open in Web Editor NEW

21.0 21.0 14.0 1.94 MB

Communication with Grundfos GENIBus pumps.

Python 44.62% C++ 7.63% C 39.01% Arduino 1.88% Makefile 0.44% M4 0.63% Shell 5.80%

genibus grundfos python

genibus's Introduction

genibus's People

Contributors

Stargazers

Watchers

Forkers

pixelatedpic mandl thunderex luckyhacky nklyshko charuga onoff rogertex costi1010 ckurlinski leehewitt opajonk yoeshi mrtir1995

genibus's Issues

GENIbus file missing

Good morning Christoph2.
His work is very interesting. I am developing a GENIbus-Arduino MQTT gateway for a Grundfos CU352 pump controller. Will you have the cu.pdf file, mentioned at the end of the protocol specification file? Could you upload it to the "doc" folder?
Best regards
Leonardo

Missing "dataitemsMAGNA.yaml"

This is read from

GENIBus/tools/genicontrol/dataitems.py

DATAITEMS = yaml.load(createStringBuffer(readConfigFile("genicontrol", "dataitemsMAGNA.yaml")))

GENIbus OPC

Good afternoon, Christoph. I have a question - do you have the GENIbus OPC Server file? In specification there is a point about it

Maybe you have another files such as:

Thank you very much!

Alpha3 BLE Protocol (Bluetooth Low Energy)

Do you know something about the protocol used in latest Alpah3 pumps on bluetooth low energy (which is used by the smart-device app). Do you have a starting point / document or some idea how to get that?

Recommend Projects