chiengineer / eagle-libraries Goto Github PK

I think the various bits are covered under different licenses - the original cadsoft - are these included? SparkFun last I checked had an "non-commercial use". Others are public and freely redistributable.

So under what terms can I use the version that gets checked out from here?

I'm looking for the lcm1602circuit commonly added to LCDs to enable I2C interface. Do you have it somewhere?

Hi,

Will there by a Molex 5566-3 connector added to this library?

Thanks,
Mark

Under badges split off Pumping Station: One to a Creative commons badge library to improve usability

Whenever I tried to open supply.lbr a message pops up that says
"
EAGLE update report

Date: 12/7/17 12:44 PM
File: /Applications/EAGLE-8.4.3/lbr/Eagle-Libraries-master/Badges/supply.lbr

An error occurred while parsing the intermediate XML file.
The XML file has been loaded into a text editor window as
/Applications/EAGLE-8.4.3/lbr/Eagle-Libraries-master/Badges/supply.rpt.lbr

Error:

line 49, column 28: Unexpected ''.
"

Hi.

The Tiny10 device has 6 pins - PB0, PB1, PB2 and PB3(RESET) along with VCC and GND.
The library part shows 8, adding PB4 and PB5 (RESET).

Thought you might like to know.

God of you (all) to create (and maintain) this library.

Take care

Mike

The Nixie tubes (specifically the IN-4/18) from this library have mismatched pinouts.
The main problem in this is, that some Pins are swapped with usually unused pins, that so can in no way be accessed to work around the problem.
My findings are based on the pinouts listed in the datasheet provided by tube tester.