cbries / railessentials Goto Github PK

RailEssentials is a software for controlling your Model Trains especially when ESU's ECoS 50210/50200 is used. RailEssentials provides a Track-designer, an Analyzer for automatic detection of all possible Routes between directly connected Blocks, and an Event-system (e.g. by use of S88-Feedback-Bus) for setup a fully automatic drive of all your trains. Furthermore, any Train can be manually controlled, their functions are allowed to be switched directly on and off by the user interface.

Home Page: http://www.railessentials.net

License: MIT License

C# 27.67% Smarty 0.01% CSS 8.83% JavaScript 59.37% Batchfile 0.01% HTML 4.03% Inno Setup 0.09%

modeltrain esu ecos50210 maerklin dcc analyzer modelleisenbahn automation ecos 50210

railessentials's People

Contributors

Stargazers

Watchers

Forkers

holgerjeromin big12boy lichtel blackbluegl

railessentials's Issues

semaphores are not supported (i.e. not triggered during automode)

Measure time between fb enter and fb in during AutoMode, I. E. scale SpeedCurve maxTime

Support individual times for all Blocks.

provide a "option group", i.e. only one button/option is allowed to be enabled on single-click, all other options are disabled

We will just add a "Group Column" and this will be allow to have only one active command:

Adding a "*" at the beginning will make it as "Default":

Initial block&fb must be generated during item drop from Toolbox

If not, a new Plan from scratch can not be created. It is critical.

Info of Locomotives vanishes sometimes

Lock extra (subsequent) blocks for individual Routes (e.g. some one-way Routes could be blocked by followed trains)

Stop Wait-Counter when Finalize is executed by the user

provide feedback in which direction the train is traveling

Priorized Routing Algorithmen for a Locomotive to Clean All Tracks with Cleaning-Train

A specific train can be configured to drive-threw all blocks to allow to clean all tracks.

Store date & time when a Locomotive runs & Store information of accessory switch calls

Store relevant information which probably important for maintainance.
Date&Time of locomotive runs for adding oil, etc.
Number of switch changes to check servos/motors.

Provide executable Setup instead of Zip in Daily-Builds

Start Train on doubleclick on individual block

Check if AutoMode recognizes disabled target blocks

the overlay loc control has opacity and vanishes to fast for the target block in AutoMode

store webcamViewer position on-demand

Provide PlanItem for Webcam/Video Streams

Support a stream added to the plan, e.g. Webcam, Video, Youtube, etc.
Allows to supervise the underground tracks/stations.

Fb-in for B09 does not work as expected

Fb-enter works, but no Fb-in for B09

improve several parts, e.g. labels in ctx menu, sensor visualization when in route, etc.

the overlay loc control must be moved down a little bit on top edges

provide ctx menu to lock block directly in the plan

allow to set "maintenance" / "malfunction" for accessory, i.e. will not be used in AutoMode

If accessory is a switch and used in routes, during AutoMode do not select the route which contains the accessory.

Provide Daily Master Builds and a Download of Executables

[low] Image Uploader/Editor for adding Locomotive images

23rd March 2021: will not be implemented as full webui interface, user must provide locomotive images manually in a specific directory, the must have the same name as the locomotive and will be loaded on demand.

Wiki entry will follow.