bpi-sinovoip / bpi-m2u-bsp Goto Github PK
View Code? Open in Web Editor NEWSupports Banana Pi BPI-M2 Ultra (R40) / BPI-M2 Berry (V40) (Kernel3.10)
Supports Banana Pi BPI-M2 Ultra (R40) / BPI-M2 Berry (V40) (Kernel3.10)
Check whether the policy routing and MARK are set to -----, but they do not take effect
It is necessary to clarify which step is the problem, and the default route in the main table can be determined by capturing the packet, and the default route to utun7 can be diverted by adding a default route to utun7 in the main table. ----- Confirm that the main table is gone
Then it is possible that the conditions for matching the 1001 table are not met, that is to say, the fwmark is not met, so a policy route is added at the front, and the 1001 table is unconditionally selected, and it will also return to normal at this time. ------ It means that the mark matching of the policy route is invalid
Then there is a problem in the mangle table of netfilter, which means that it may be a failure to mark ------ it may be a problem with netfilter
Mark the log on the filter table, if you mark the mangle, the content will be recorded in the kernel log, which shows that the netfilter is marked, indicating that there may be a problem with the fwmark matching of the policy route----- There is a problem with positioning the IP rule
So I didn't catch the package for IPv6 on utun7
Dear Banana Pi team,
I would like to know if if is possible to upgrade Ubuntu Mate to the next Long Term Support (18.04) in order to continue to use my M2U ?
The problem is 16.04 should stop in April 2019.
Could you please feedback ? Thank you very much.
Hello,
I was trying to find the headers for 3.10.107 but couldnt find them. So I tried installing 3.10.108 from BPI-Files repo(since I can find the headers for that kernel version are supplied). That left me with a problem. It seems my m2u can no longer find the ethernet PHY. When I build this repo, the SD/100mb folder supplies bad images, and the m2u doesnt boot.
I'm using the 3.10.107 arch linux image. I think(im not sure) I need the 3.10.10x headers because I want to use wireguard and the dkms needs the headers to build.
Hope someone can help me out here.
Hello,
I cant find help anyway (bpi forums or linux ones)
Right now I loos a audio channel (left headphone)
I try a fresh install of ubuntu and raspbian...
I maybe change some file because the last days the sound was great (stereo)
I have bpi2mu (ubuntu Mate uptodate)
Alsamixer dont give me solution and I dont know where the drivers / config files can be.
I realy need help.
Thanks...
Can't load bcmdhd
downloaded fw (https://github.com/BPI-SINOVOIP/BPI-files/tree/master/others/brcm/lib/firmware/ap6212), can someone fex as in git source.
"failed to power up DHD generic adapter".
Hi,
I am a newbie to the banana pi scene with little or no experience, I have a banana pi0 board with onboard wireless, trouble is I cant connect to it no matter what i try.
I have tried to connect to the banana pi0 wirelessly when using a nintendont retro gaming build with no success as it just wont connect and i am now ready for throwing the thing in a drawer and forgetting about it.
If anyone has any info that could help me solve this issue, could you please post a reply as i am about demented, many thanks in advance.
To reproduce it, add a rule:
ip rule add to 1.1.1.1 fwmark 1 lookup 1
ip route add default via 127.0.0.1
and check route for 1.1.1.1 with and without the mark:
ip route get 1.1.1.1
ip route get 1.1.1.1 mark 1
Both will return the same result and that's wrong behavior.
First command should return default gateway from the main table (ip route show)
Second command should return dev lo
What is weird - it works if I use tos instead of fwmark.
I've tried different distros (ubuntu, debian, centos) for my M2 Berry. It doesn't work. Seems there is some problem with the kernel options or something else.
CONFIG_IP_ADVANCED_ROUTER is set to y in /proc/config.gz
Dear Banana Pi team,
After compiling the BPI-M2U-bsp SDK according to the steps in the BPI-M2Ultra_Compiler_SOP document, I can get two versions of firmware for Linux and tina (openwrt). Among them, the tina version firmware can be updated to emmc by using PhoenixSuit tools through the USB OTG interface on the bpi-m2-ultra board, but the Linux version system can only be updated to the on-board emmc by running a TF card.
I want to be able to compile firmware that is updated using USB via the PhoenixSuit tool, which will be very convenient. how should I do it?
Can anyone help me!
thank you very much!
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.