用于邦讯玩儿插排(PTSP01)的Homeassistant自定义集成.
目前,它只能连接到无密码的插排。
可通过在主板串口连接单片机,使其在收到Press the [f] key and hit [enter] to enter failsafe mode
后写入 f\r/etc/init.d/rcS S boot\r
进入failsafe模式并继续启动来绕过密码。
功能:
- 通过telnet连接
- 将每个插孔当作一个设备
- 读取/控制开关
- 读取电压、电流、功率、能耗
This is a custom homeassistant integration for boomsense ptsp01 powerstrip.
For now, it only works with powerstrips with no password.
A MCU can be attached to onboard serial, make it write f\r/etc/init.d/rcS S boot\r
after reading Press the [f] key and hit [enter] to enter failsafe mode
, then the powerstrip will be booted into failsafe mode and continue with no password needed.
Features:
- Connects via telnet
- Represents every socket as a device
- Access to switch
- Read Voltage, Current, Power and Energy