Hi
After updating the NuGet package to the latest version the text height on the labels I draw using this library has become small. I tried reverting back to an older package and the labels looked good again in a matter of text height. Also, the barcode positions are a little bit off. The last barcode is rendered outside the label. I have tried generating a label on labelary.com to test if it was just the label that had some errors in the ZPL code.
Below are two images, one from the render using BinaryKits and the other one is from labelary.com. Sorry, I had to blur the details - I know it makes it harder to see what I mean. Below is also a screenshot of the demo label I have made.
Labelary.com
BinaryKits.ZPL
{: width="250px"}.
ZPL
^XA ^FT22,43 ^A0N,,36 ^FDEXPRESS WORLDWIDE^FS ^FT22,43 ^A0N,,36 ^FDEXPRESS WORLDWIDE^FS ^FT23,70 ^A0N,,15 ^FDDate and Company^FS ^FO386,0 ^GB150,79,79,B^FS ^FT388,58 ^A0N,,65 ^FR^FDWPX^FS ^FO543,23 ^IMR:dhllg1.GRF^FS ^FO0,78 ^GB780,0,2,B^FS ^FT19,102 ^A0N,,17 ^FDFrom :^FS ^FT19,102 ^A0N,,17 ^FDFrom :^FS ^FT87,102 ^A0N,,25 ^FDCompany Name^FS ^FT87,129 ^A0N,,25 ^FDSender Name^FS ^FT87,156 ^A0N,,25 ^FDAddress1^FS ^FT87,182 ^A0N,,25 ^FDZip, City^FS ^FT87,209 ^A0N,,25 ^FDCountry^FS ^FT693,102 ^A0N,,22 ^FDOrigin:^FS ^FT694,140 ^A0N,,41 ^FDBLL^FS ^FT693,140 ^A0N,,41 ^FDBLL^FS ^FO0,220 ^GB780,0,2,B^FS ^FT35,252 ^A0N,,17 ^FDTo :^FS ^FT35,252 ^A0N,,17 ^FDTo :^FS ^FO25,226 ^GB2,31,5,B^FS ^FO28,224 ^GB31,0,5,B^FS ^FO750,226 ^GB2,31,5,B^FS ^FO720,224 ^GB31,0,5,B^FS ^FO25,409 ^GB2,31,5,B^FS ^FO28,439 ^GB31,0,5,B^FS ^FO750,409 ^GB2,31,5,B^FS ^FO720,439 ^GB31,0,5,B^FS ^FT87,249 ^A0N,,31 ^FDReceiver Company^FS ^FT87,282 ^A0N,,31 ^FDReceiver Name^FS ^FT87,316 ^A0N,,31 ^FDAttention^FS ^FT87,349 ^A0N,,31 ^FDAddress1^FS ^FT87,390 ^A0N,,40 ^FDZip, City^FS ^FT87,390 ^A0N,,40 ^FD^FS ^FT87,434 ^A0N,,40 ^FDCountry^FS ^FT87,434 ^A0N,,40 ^FD^FS ^FT575,244 ^A0N,,20 ^FDContact:^FS ^FO0,448 ^GB780,0,2,B^FS ^FT8,518 ^A0N,,90 ^FD.^FS ^FT204,510 ^A0N,,58 ^FDXX-XXX-XXX^FS ^FT203,510 ^A0N,,58 ^FDXX-XXX-XXX^FS ^FT744,518 ^A0N,,90 ^FD.^FS ^FO0,535 ^GB780,0,2,B^FS ^FO0,535 ^GFA,192,192,3,ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00ffff00000000^FS ^FO16,535 ^GB551,63,63,B^FS ^FT19,581 ^A0N,,48 ^FR^FDC-RET^FS ^FT701,551 ^A0N,,17 ^FDTime^FS ^FT626,551 ^A0N,,17 ^FDDay^FS ^FO0,598 ^GB780,0,2,B^FS ^FT12,656 ^A0N,,25 ^FDRef No: Some Reference No. Here^FS ^FT12,656 ^A0N,,25 ^FDRef No: Some Reference No. Here^FS ^FT524,615 ^A0N,,17 ^FDPce/Shpt Weight^FS ^FT700,615 ^A0N,,17 ^FDPiece^FS ^FT510,650 ^A0N,,28 ^FD1.0/39.0 kg^FS ^FT509,650 ^A0N,,28 ^FD1.0/39.0 kg^FS ^FT686,654 ^A0N,,41 ^FD1/2^FS ^FT686,654 ^A0N,,41 ^FD1/2^FS ^FT12,675 ^A0N,,17 ^FDContent : Demo content inside box^FS ^FO0,781 ^GB780,0,2,B^FS ^FO39,802 ^BY3,2.3,94 ^B3N,N,94,N,N ^FD1111111111^FS ^FT165,917 ^A0N,,26 ^FDWAYBILL 11 1111 11 111^FS ^FO57,928 ^BY3,2.7,205 ^BCN,205,N,N,N,A ^FD2LBF:Country+123456789^FS ^FT222,1159 ^A0N,,26 ^FDCountry+123456789^FS ^FO0,1171 ^GB780,0,2,B^FS ^FT12,1203 ^A0N,,20 ^FDRef Code:^FS ^FO123,1306 ^BY3,3.0,205 ^BCN,205,N,N,N,A ^FDPACKAGEIDHERE^FS ^FT202,1533 ^A0N,,26 ^FDPACKAGE ID HERE^FS ^XZ
Demo labels
Labelary.com
BinaryKits.ZPL
Hope you can help me clarify what is wrong. Can I replace anything inside the ZPL code before sending it to the drawer to make it better?