bg4rff / battery-charger-1 Goto Github PK

This project aims to provide a PCB for a small capacity battery charger for lead acid batteries. The context is to build a unit that will provide off-line 12V power to an external device while it is powered on, and charge the battery when the device is turned off or when the battery capacity becomes critically low. The battery charger itself is to be used in other projects and as such is brought out as an independent circuit.

The input voltage may be derived from a 12V battery and as such may range from as low as 11V up to 13V. The SMPS needed for this is a buck-boost architecture that can work as boost for charging 12V batteries, and buck for charging 6V batteries. The buck-boost circuit can be a little tricky to control so various configurations are tested, such as setting the boost to a fixed value and using the buck to bring it back to the desired voltage.

Charging algorithms are borrowed from the BMS project.

(c) K. Sarkies 16/09/2015