berobloom / lscindoorcameralocal1080p Goto Github PK

Hello,
I followed this nice tutorial.
I came till step 11 without problems, but when I tried to write the flash
with new the file (fullmod.bin), I recognized it was too big.
It could not be flashed.
I think I missed something in the modifying process.
Due to, I already had done the erasing command, I decided to flash
the original fulldump.bin file.
Then I did the reset.

Now I only get these two lines output on power on:

ROM: Use nor flash.
ERR: Flash is corrupted

Is that a U-Boot message or is U-Boot lost?
Do you know where U-Boot is stored?

Thanks a lot!

Hi, i recently aquired one of these cameras and found this guide which i followed, however it seems to be bootlooping in some form after modding it. I get the "Starting LSC Camera" sound and the beep

https://pastebin.com/74F3ZEwY this is the full bootup log if it contains anything interesting.

Is there any chance i can get some help figuring out why it loops?
thanks in advance

Hi There,

First of all thanks for creating this repo/guide, I really enjoyed the tinkering until the point at which the command gave:

$ sha256sum _fulldump.bin.extracted/squashfs-root/usr/bin/dgiot
e82679a9575c150a718b5a211b7584bb82556eddbfefdf3f932bbc1288a4c1e0  _fulldump.bin.extracted/squashfs-root/usr/bin/dgiot

Which is not the same as in your guide. Do you have any advice on how to continue?