beepboopbit / condo-management-system Goto Github PK

Describe the bug
Values in all of the table will sometimes mixed within a single table. Refresh function would fix the problem temporarily. But after a few searches and refreshes, it would then again mix all the values into a singular table.

To Reproduce
Steps to reproduce the behavior:

1. Go to 'the CMS Window and Search and Refresh the tables'
2. See the Values in the Table. It would mixed.
3. See error

Expected behavior
It should not mixed with the values from the other tables

Describe the bug
When you press Enter while you are in the search bar, you will be redirected to the Description window with no set-up values. Meaning, no exiting nor doing anything.

To Reproduce
Steps to reproduce the behavior:

1. Go to CMS
2. Click on the Search Bar
3. Press Enter
4. See error

Expected behavior
Nothing Should happen or the value would be search when the enter key was pressed.

Description button only shows details of one unit, The unit details can be seen in the image attached below. In the Description window, the 'Edit Description' does not work when clicked.

Steps:

1. Select a unit without the name 'BigBlue Corinthian Executive Regency'
2. Click the Description button
3. The details show a unit with the details in the image below.
4. Click 'Edit Description' but no window shows up

Expected output:
Should show the details of the selected unit and can be edited.

Describe the bug
There is a button malfunction in the Edit Description Window After Changing the Datas in the Edit Description Window. Confirm Button would not work.

Reproduce the bug
Steps to reproduce the behavior:
Try to Change the Value in the Edit Description Window
See that the Confirm button, it would not work.

Expected behavior
The Confirm button should work even after Updating the Details

Describe the bug
My Inputs in the Add Amenities was mixed with my inputs in the Details Table. Also, I clicked the 'back button' to go to the CMS Window and when I wanted to go back to the Description of the unit. It made the Edit Description Button Unclickable.

To Reproduce
Steps to reproduce the behavior:

1. Go to 'Edit Description and Add Amenities and Details. Save it.'
2. Click on Back Button to go straight to the CMS Window
3. Re-open the same unit and See the mixed results. Also the Edit Description would be unclickable.

Expected behavior
It should not mixed with the values of Amenities and Details. The Edit Description should also be clickable.

The Edit Condo Unit Button is the same as the Edit Description Button. There functions are the same and their windows are the same.

To Reproduce Steps to reproduce the behavior:
Go to the Edit Condo Unit Button and Compare it to the GUI of Edit Description
See that it has the same window and function

The two should have different functions, if not then one of them should be removed.

Describe the bug
If you edited the Floor1, Unit201 in the program. The Edit Condo Button would not work on the other units. This particular problem only occurs on the Floor1 table of the window. I have tried editing the amenities and details of the other floors but this particular problem did not occur on any of them.

Edit Condo Unit is not working on any other units on the floor1

Edit Condo Unit only works on Unit 201

To Reproduce
Steps to reproduce the behavior:

1. Go to Edit description and edit the amenities or details
2. Click on confirm and try to edit condo unit the other units
3. See error it would not work

Expected behavior
it should still work not only on the unit 201 but the other units of the floor

Describe the bug
The search button works. The only problem is that after searching for a particular data, it would not refresh and show all the datas. It would stay and only show the searched data.

Reproduce the bug
Steps to reproduce the behavior:
Search for a Data
After the Data Search, you cannot see the previous datas in the table.

Expected behavior
It may be better if there are a refresh function that would reset the data after the user finished searching.

If the registered username or password has an integer, the login would not let it pass.

To Reproduce Steps to reproduce the behavior:
Go to 'Register and have a username or password that has an integer'
Click on Register and try to login the account
See error (the login would not let it pass)

It should accept the username and password that the user entered

Describe the bug
The Added Amenities would not be showing in the table after the user input. Also removing an amenity does not work, if you tried to remove the same amenity twice, it makes the edit description button unfunctional and not working.

To Reproduce
Steps to reproduce the behavior:

1. Go to edit amenities
2. remove and add amenity
3. see that it would not be removed and would not add new amenity
4. remove the same amenity again, then after confirming open the same unit
5. click the edit description button and it would not work

Expected behavior
The added amenities should be seen in the table and the remove amenity function should remove the amenity and should not cause the edit description button to not work

Describe the bug
Selling the Condo Unit properly works. It modifies the table and say that its already sold. But there are problems with the Mode of Payment. If full payment was stated in the Sell Condo Window, it would not update the mode of payment in the Description Window and would still show Installment.

In testing the Bug Again, I learned that if you put Full Payment in the Sell Condo Window in the Description it would put Installment. And when you put Installment in the Sell Condo Window it would put Full Payment in the Description
"Baliktad"

Reproduce the bug
Steps to reproduce the behavior:
Try to Sell a Condo unit from any floors.
Set the Payment Options to Full Payment and Confirm
See the Description of that Unit. The Mode of Payment is still the same

Expected behavior
The Mode of Payment should be updated based on the Payment Options that was stated in the Sell Condo Window

In the description window there is an unnecessary label 'Image' and the edit description button is not working

To Reproduce Steps to reproduce the behavior:
Go to the Description window and there you'll see the unnecessary label
Click on Edit Description and it would not work
See error

The label should be removed and the button should call the edit description window

• Got to CMS
• Don't select anything
• Press Edit button or Description Button
• Error should be handled

Tried to sell Floor 5 Unit 501 and 502. The program allows the user to sell the unit even if it is already free. Additionally, the status does not change for Unit 502 when I tried to sell it.

Steps:

1. Sell Floor 5 Unit 501. (Program allows to sell the Free unit.)
2. Sell Floor 5 Unit 502.
3. Select "Installment" since it is what's written in the Floor05.dat.
4. Enter "8000"
5. Click "Confirm" (The status doesn't change.)
6. Try again selling Floor 5 Unit 502 but select "Full Payment"
7. Enter "8000"
8. Click "Confirm" (The status doesn't change.)
9. Select "Installment" since it is what's written in the Floor05.dat.
10. Enter "7000" (Lower price)
11. Click "Confirm" (The status doesn't change.)

Expected output:
If unit is free, then it should not sell.
If unit is sold, then the status will change.
If mode of payment is installment, then a minimum amount should show up "2k for all rooms"
If payment is greater than price, then show the change.
If payment is lower than price, then pop up message should show up as prompt to re-enter a greater than or equal to amount for the price.

Error in Add Amenity, When a new input is created the previous input would double. And there would also be an empty space in the top part for the first input.

To Reproduce Steps to reproduce the behavior:
Go to 'Add Amenity GUI'
Add an amenity and after that add another one again
See error (the previous input doubles)

The previous input should not be doubled

Describe the bug

When creating a new username and/or password, adding numbers is not recognized by the encryption, and when it checks in the credentials.dat file, all numbers are turned 'b.'

Reproduce the bug

Steps to reproduce the behavior:

1. Press the 'Register' button to prompt to register form.
2. Create a new username and/or password that includes a number.
3. Put the new username and password.

Expected behavior

The newly created username and password with numbers should be able to login successfully.

Generate report button, search button, and exit button in CMS window doesn't do anything when clicked.

Tried to input the name of a unit in the search bar, but it also doesn't work. Same thing goes if the unit number is searched.

Steps for trying search:

1. Click Floor 3 tab
2. Type 'Ensemble Corinthian Executive Regency' in the search bar
3. Click search

Expected outcome:
Room 303 should show only show up in the tab or appear on the top of the list.

Describe the bug
The Edit Description Button for Description Window, And the Confirm Button for Edit Description Window works. But after adding and removing datas in the Edit Details Window. These buttons would not work. It would only work again after restarting the program itself.

BUT WHEN YOU CLICK THE EXIT BUTTONS, IT WOULD STILL UPDATE THE DATAS YOU CHANGED AND ADDED. BUT AFTER RESTARTING THE PROGRAM IT WOULD BE REMOVED.

Reproduce the bug
Steps to reproduce the behavior:
Try to Add and Remove in the Amenities and Details
Confirm it and After that the buttons would not work.

Expected behavior
The Buttons should still work even after adding and removing datas in the amenities and details window.

Describe the bug
In the CMS Window, the user can edit the values in the table. But after editing , it would not change or update the new values for the other windows. Like the Description and Edit Condo Unit Windows.

Reproduce the bug
Steps to reproduce the behavior:
Try to Change the Value in the Table
See the Description Window or Edit Condo Unit Window
See that it would not update the value.

Expected behavior
I think that the table should not be editable. You can edit its table properties in the GUI and uncheck the editable features. If the team wants it to stay editable, it should then update other windows.