A prototype storage service.
There are two components:
crucible-downstairs
: will reside with the target disk storage and provide access to it via the network for those upstairscrucible-upstairs
: will reside with the machine using the storage, making requests across the network to some number of downstairs replicas
As this is under active development, this space is subject to change. The steps below still work, but may give slightly different output as more code is written.
To give it a whirl, first build the workspace with cargo build
. Then run
a set of Downstairs processes:
To create a downstairs region, use the create
subcommand.
To run a downstairs agent that will listen for upstairs to connect to it,
provide the run
subcommand.
Shown next is an example of creating three downstairs instances (run each in a
different window) on the same machine. Each should have a unique UUID, port,
and directory where the region files will be. Once each is created we will
then run
them.
$ cargo run -q -p crucible-downstairs -- create -u $(uuidgen) -d var/3810
$ cargo run -q -p crucible-downstairs -- run -p 3810 -d var/3810
...
$ cargo run -q -p crucible-downstairs -- create -u $(uuidgen) -d var/3820
$ cargo run -q -p crucible-downstairs -- run -p 3820 -d var/3820
$ cargo run -q -p crucible-downstairs -- create -u $(uuidgen) -d var/3830
$ cargo run -q -p crucible-downstairs -- run -p 3830 -d var/3830
Once all three are started, you can connect to them by using the crucible crutest program that will start the upstairs side of crucible for you and can run a variety of tests on it.
Here is an example running crutest with the "one" test option. This will connect to the three downstairs and do one write/read/flush then exit.
$ cargo run -q -p crutest -- one -t 127.0.0.1:3830 -t 127.0.0.1:3820 -t 127.0.0.1:3810 -q
raw options: Opt { target: [127.0.0.1:3830, 127.0.0.1:3820, 127.0.0.1:3810] }
runtime is spawned
DTrace probes registered ok
127.0.0.1:3820[1] connecting to 127.0.0.1:3820
127.0.0.1:3830[0] connecting to 127.0.0.1:3830
127.0.0.1:3810[2] connecting to 127.0.0.1:3810
127.0.0.1:3820[1] ok, connected to 127.0.0.1:3820
127.0.0.1:3830[0] ok, connected to 127.0.0.1:3830
127.0.0.1:3810[2] ok, connected to 127.0.0.1:3810
127.0.0.1:3810 Evaluate new downstairs : bs:512 es:100 ec:10 versions: [0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
Set inital Extent versions to [0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
Next flush: 1
Global using: bs:512 es:100 ec:10
127.0.0.1:3830 Evaluate new downstairs : bs:512 es:100 ec:10 versions: [0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
#### 127.0.0.1:3810 #### CONNECTED ######## 1/3
#### 127.0.0.1:3830 #### CONNECTED ######## 2/3
127.0.0.1:3820 Evaluate new downstairs : bs:512 es:100 ec:10 versions: [0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
#### 127.0.0.1:3820 #### CONNECTED ######## 3/3
send a write
send a flush
nwo: [(0, 99, 512), (1, 0, 512)] from offset:50688 data: 0x7fb053008200 len:1024
send a read
Tests done, wait
WRITE: gw_id:1 ds_ids:{1001: 512, 1000: 512}
FLUSH: gw_id:2 ds_ids:{1002: 0}
nwo: [(0, 99, 512), (1, 0, 512)] from offset:50688 data len:1024
READ: gw_id:3 ds_ids:{1003: 512, 1004: 512}
[1] Write ds_id:1000 eid:0 bo:99
[0] Write ds_id:1000 eid:0 bo:99
[1] Write ds_id:1001 eid:1 bo:0
[0] Write ds_id:1001 eid:1 bo:0
Flush ds_id:1002 dep:2 flush_number:1
Flush ds_id:1002 dep:2 flush_number:1
Read ds_id:1003 eid:0 bo:99 blocks:1
[2] Write ds_id:1000 eid:0 bo:99
Read ds_id:1003 eid:0 bo:99 blocks:1
Read ds_id:1004 eid:1 bo:0 blocks:1
Read ds_id:1004 eid:1 bo:0 blocks:1
[2] Write ds_id:1001 eid:1 bo:0
Flush ds_id:1002 dep:2 flush_number:1
Read ds_id:1003 eid:0 bo:99 blocks:1
Read ds_id:1004 eid:1 bo:0 blocks:1
RETIRE: ds_id 1000 from gw_id:1
RETIRE: ds_id 1001 from gw_id:1
Save data for ds_id:1003
Save data for ds_id:1004
RETIRE: ds_id 1002 from gw_id:2
RETIRE: ds_id 1003 from gw_id:3
gw_id:3 Save read buffer for 1003
RETIRE: ds_id 1004 from gw_id:3
gw_id:3 Save read buffer for 1004
Final data copy [1003, 1004]
all Tests done
On the console of each Downstairs, you will see a connection; e.g.,
...
raw options: Opt { address: 0.0.0.0, port: 3810, data: "var/3810", create: true }
Create new extent directory
created new region file "var/3810/region.json"
Current flush_numbers: [0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
Startup Extent values: [0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
listening on 0.0.0.0:3810
connection from 127.0.0.1:65030 connections count:1
Current flush_numbers: [0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
Write rn:1000 eid:0 dep:[] bo:99
Write rn:1001 eid:1 dep:[] bo:0
flush rn:1002 dep:[1000, 1001] fln:1
Read rn:1003 eid:0 bo:99
Read rn:1004 eid:1 bo:0
OK: connection(1): all done
Optionally specify --block-size
and/or --extent-size
when creating downstairs regions:
cargo run -q -p crucible-downstairs -- create -u $(uuidgen) -d "disks/d${1}/" --block-size 4096 --extent-size 20
cargo run -q -p crucible-downstairs -- run -p "380${1}" -d "disks/d${1}/"
To take a file and use it to create a crucible filesystem, you can do the following:, assuming your file to import is called: alpine-standard-3.14.0-x86_64.iso
and you are creating a crucible region at the directory var/itest
:
cargo run -q -p crucible-downstairs -- create -u $(uuidgen) -d var/itest -i alpine-standard-3.14.0-x86_64.iso
This will generate a new crucible region filesystem with initial metadata and then exit. Here is an example of running that command:
$ cargo run -q -p crucible-downstairs -- create -u $(uuidgen) -d var/itest -i alpine-standard-3.14.0-x86_64.iso
Created new region file "var/itest/region.json"
Import file_size: 143654912 Extent size:51200 Total extents:2806
Importing "/Users/alan/Downloads/alpine-standard-3.14.0-x86_64.iso" to new region
Created 2806 extents and Copied 280576 blocks
Current flush_numbers [0..12]: [1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1]
Exitng after import
depending on your needs, you may need to know the number of blocks that were copied in during import. In the previous example, the import copied 280576
blocks. If we want the exact same file (and not, for example, just to archive a Crucible downstairs or pick a specific block) we need to tell the export how many blocks to copy.
To export the file we imported in the previous example:
cargo run -q -p crucible-downstairs -- export -d var/itest -e alan.iso --count 280576
Run a Jaeger container in order to collect and visualize traces:
$ docker run --rm -d --name jaeger \
-e COLLECTOR_ZIPKIN_HOST_PORT=:9411 \
-p 5775:5775/udp \
-p 6831:6831/udp \
-p 6832:6832/udp \
-p 5778:5778 \
-p 16686:16686 \
-p 14268:14268 \
-p 14250:14250 \
-p 9411:9411 \
jaegertracing/all-in-one:1.24
Pass an option to crucible-downstairs to send traces to Jaeger:
$ cargo run -q -p crucible-downstairs -- run -p 3830 -d var/3830 --trace-endpoint localhost:6831
Then, go to http://localhost:16686
to see the Jaeger UI.
Some basic stats have been added to the downstairs that can be sent to Oximeter.
Currently, only a locally running Oximeter server is supported, and only at
the default port. To enable stats when running a downstairs, add the
--oximeter <IP:Port>
option. If running locally, the oximeter IP:Port is
127.0.0.1:12221
To display the stats, you can use the oxdb command from omicron/oximeter
along with jq
to make it pretty.
Replace the UUID below with the UUID for the downstairs you wish to view. The available stats are: connect, flush, read, write.
cargo run --bin oxdb -- query crucible_downstairs:flush downstairs_uuid==12345678-3810-3810-3810-000000003810 | jq
Here is a deeper example, to just print the latest count for flush:
LAST_FLUSH=$(cargo run --bin oxdb -- query crucible_downstairs:flush downstairs_uuid==12345678-3810-3810-3810-000000003810 | jq '.[].measurements[].timestamp '| sort -n | tail -1)
cargo run --bin oxdb -- query crucible_downstairs:flush downstairs_uuid==12345678-3810-3810-3810-000000003810 | jq ".[].measurements[] | select(.timestamp == $LAST_FLUSH) | .datum.CumulativeI64.value"
Unless otherwise noted, all components are licensed under the Mozilla Public License Version 2.0.