bachibouzouk / critical-demand-model Goto Github PK

1. The sensitive analysis can be plotted based on the predefined user entries and stepwise changes. Here is an example: the x-Axes shows user determined maximum_demand_reduction factors, while y-Axes shall shows the LCOE (USD/KWh). Suggestion: A figure attached.

2. The model should plot the Electricity Flow of the optimized system as a single line diagram (see e.g. Offgridders below) and in two graphs as following:
   First graph(on top): y-Axes show electricity flow (kWh) on the left side, while on the right side it should show critical demand (red), non-critical demand (green), PV generation (yellow), storage charge, storage discharge(blue), genset generation (black). The x- Axes of the graph shows Time in days (02-08 days).
   Second graph (down): shows the SoC of storage. x- Axes shows Time in days (02-08 days) as well.

@Bachibouzouk