View Code? Open in Web Editor
NEW
This project forked from unicornteam/hackcube
Python 27.09%
Shell 1.49%
CSS 2.46%
JavaScript 37.21%
HTML 6.49%
Vue 25.26%
hackcube's Introduction
![](https://github.com/UnicornTeam/hackcube/raw/master/Image/1517678256674036.jpg?raw=true)
- CC1101 433MHz
- CC1101 315MHz
- nRF24L01+ PA (2.4Ghz)
- EM4095 (125Khz)
- 32U4 HID
- USB2514B 4*USB HUB
- RTL8822BU (2.4Ghz/5Ghz ac) (Bluetooth 4.1)
- PN532 (13.56 Mhz)
- BCM43438 (2.4Ghz) (Bluetooth 4.1)
- 8*8 RGB LED
- TI BQ25895 Supports Max Charge (QC3.0)
- TI TPS61088
NFC: Read 125Khz and 13.56Mhz card.
![](https://github.com/UnicornTeam/hackcube/raw/master/Image/gif/ID.gif?raw=true)
RF: Support 315Mhz 433Mhz 2.4Ghz sniffer and injection.
Sniffer 433Mhz Remote and nRF24l01
![](https://github.com/UnicornTeam/hackcube/raw/master/Image/gif/RF1.gif?raw=true)
TMPS attack (433.92Mhz FSK)
![](https://github.com/UnicornTeam/hackcube/raw/master/Image/gif/TMPS1.gif?raw=true)
![](https://github.com/UnicornTeam/hackcube/raw/master/Image/gif/RF_attack_1.gif?raw=true)
![](https://github.com/UnicornTeam/hackcube/raw/master/Image/gif/nrf24l01.gif?raw=true)
![](https://github.com/UnicornTeam/hackcube/raw/master/Image/gif/RF_HID.gif?raw=true)
HID: Simulate as a HID device.
![](https://github.com/UnicornTeam/hackcube/raw/master/Image/gif/WHID.gif?raw=true)
WIFI: Capture data from the chosen channel, and bloke any chosen AP or Clients.
![](https://github.com/UnicornTeam/hackcube/raw/master/Image/gif/WIFI.gif?raw=true)
Other:Can extend other modules, such as 27Mhz toy remote
![](https://github.com/UnicornTeam/hackcube/raw/master/Image/gif/27MhzWeb.gif?raw=true)
NFO: Interface for system status and Arduino board firmware upgrade
![](https://github.com/UnicornTeam/hackcube/raw/master/Image/gif/LED_1.gif?raw=true)
hackcube's People
Watchers