This is a P8X32A/Propeller, P2X8C4M64P/Propeller 2 driver object for Texas Instruments CC1101 low-power ISM-band (sub-1GHz) RF transceiver.

IMPORTANT: This software is meant to be used with the spin-standard-library (P8X32A) or p2-spin-standard-library (P2X8C4M64P). Please install the applicable library first before attempting to use this code, otherwise you will be missing several files required to build the project.

• SPI connection at up to 1MHz (P1), ~5MHz (P2)
• Over-the-air (OTA) data rate from 600 Baud to 500kBaud
• 2FSK, 4FSK, GFSK, ASK/OOK, MSK modulation formats
• Set common RF parameters: Receive bandwidth, IF, carrier freq, DC block filter, RX Gain, TX power, FSK deviation freq, channel spacing
• Set number of preamble bytes
• Set function of CC1101's GPIO pins
• Address filtering
• Options for increasing transmission robustness: Data whitening, Manchester encoding, FEC, syncword
• RSSI measurement

P1/SPIN1:

• spin-standard-library
• P1: 1 extra core/cog for the PASM SPI engine (none if bytecode-based engine is used)

P2/SPIN2:

• p2-spin-standard-library

• TBD