aus3d / z-probe Goto Github PK

Hello, I purchased a small probe Aus3D IR 1.4 for my 3D printer.
Having never had time to climb it, this morning I decided to ride it.

Unfortunately the probe that I bought does not work (no small light to the ignition).
I tried different power supplies (that of the MKS BASE card, then that of a WEMOS D1), and the 5v is present.
After looking at the magnifying glass on the map I saw that two small legs of the IC were welded together, so I took my soldering iron and removed this invasive weld.
Now I tell myself that if the IC is programmed as an Arduino, and although with this solder it could never be programmed.
Is that the right question? or simply my little card is roasted? (which would be a shame because I have never used it and at nearly 30 € ... it is dear waste) or else can we reprogram it? if so how and where can I find the firmware?

Hi Chris,
I see that it is quite difficult to get stock on your sensor.
It's great that you share the necessary components and the schematic for the PCB!
However, you didn't put the source code for the ATtiny.
Is it possible to share it, as I assume you have made changes since this version https://github.com/dc42/OrmerodSensorBoard/tree/master/Firmware/Version2-differential-IR

Thanks