Comments (25)
It hangs on my computer (barebones) for a bit too but later on boots fine
But the fan spins faster is my main concern, is it normal behavior?
Edit: i already wait around 1 hour and i still hang on grub menu
from ataraxia.
hmm, what about your firmware?
How i check that? I pick the firmware choice on grub but it still hang. As for my laptop specs, it is Acer Nitro 5 with specs:
CPU: AMD Ryzen 5 3550H
iGPU: AMD Radeon Vega 8 Mobile
dGPU: AMD Radeon RX 550X
SSD M.2 NVMe 500 GB
Wireless Qualcomm Atheros (ath10k)
Wired Realtek
from ataraxia.
to see if it is a firmware issue, try booting into a wholly free distro, such as the ones approved by the GNU project (Parabola GNU/Linux-libre, for instance).
If you are able to boot into that, then it is likely not a non-free firmware issue.
Have you tried with both UEFI and Legacy?
|____ If not, try both.
from ataraxia.
to see if it is a firmware issue, try booting into a wholly free distro, such as the ones approved by the GNU project (Parabola GNU/Linux-libre, for instance).
If you are able to boot into that, then it is likely not a non-free firmware issue.
Have you tried with both UEFI and Legacy?
|____ If not, try both.
It is arch-based distro right? i can boot up to arch, i have both fedora and arch on my laptop since i use btrfs to shared both OS on a single partition. Nevertheless, I'll try it when i get home.
My Laptop only support UEFI boot. i didn't find in BIOS setting to boot into legacy
from ataraxia.
It's not based on arch, read the site...
чт, 8 апр. 2021 г., 09:38 Abdul Subayu @.***>:
to see if it is a firmware issue, try booting into a wholly free distro,
such as the ones approved by the GNU project
https://www.gnu.org/distros/free-distros.html (Parabola GNU/Linux-libre
https://www.parabola.nu/, for instance).If you are able to boot into that, then it is likely not a non-free
firmware issue.Have you tried with both UEFI and Legacy?
|____ If not, try both.It is arch-based distro right? i can boot up to arch, i have both fedora
and arch on my laptop since i use btrfs to shared both OS on a single
partition. Nevertheless, I'll try it when i get home.My Laptop only support UEFI boot. i didn't find in BIOS setting to boot
into legacy—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
#246 (comment),
or unsubscribe
https://github.com/notifications/unsubscribe-auth/ALI22ENRV4JFEDVJDZ4EEPLTHVFQDANCNFSM42PCSJMQ
.
from ataraxia.
to see if it is a firmware issue, try booting into a wholly free distro, such as the ones approved by the GNU project (Parabola GNU/Linux-libre, for instance).
If you are able to boot into that, then it is likely not a non-free firmware issue.
Have you tried with both UEFI and Legacy?
|____ If not, try both.
Him it's me again. I already try to boot the parabola iso on my laptop. And it's boot up fine. I confused why ataraxia won't boot on my laptop
from ataraxia.
Not sure what's wrong here. Seems odd it would hang there. Maybe ur installation media got corruped somehow?
from ataraxia.
Try using balenaetcher and let it verify. If that doesn't work still, try using the previous snapshot.
from ataraxia.
Not sure what's wrong here. Seems odd it would hang there. Maybe ur installation media got corruped somehow?
This could be possible, but i already tried to download the same image 3 times and burn it to usb, it was still the same.
from ataraxia.
Try using balenaetcher and let it verify. If that doesn't work still, try using the previous snapshot.
I even use rufus and balenaetcher aside with dd. I'll try with the previous snapshot to see if it'll work
from ataraxia.
Try using balenaetcher and let it verify. If that doesn't work still, try using the previous snapshot.
I even use rufus and balenaetcher aside with dd. I'll try with the previous snapshot to see if it'll work
Be sure to let us know if that works. The latest snapshot is just an updated version of the last snapshot for the most part as far as I know. If you have luck, be sure to let us know!
from ataraxia.
Hi. It's me again, I already tried the february snapshot iso and the result is just the same as before. I already tried with rufus, balenaetcher, and dd to make the bootable. But none seems to boot up and alway hang in the aftermath of grub menu.
from ataraxia.
Hi it's me again to update my situation. I tried the November snapshot and I'm able to boot! I try it 3 times with balena, rufus, and dd. Only balenaetcher that didn't show the bootable in bios.
One thing also that i noticed, when i burn the november snapshot iso with rufus, i get this option
which i didn't get with both february and march snapshot
I tried both options and i still able to boot
from ataraxia.
Also i want to give update that i tried to redownload the march snapshot today, and give it another try. I try burn it with rufus iso mode (both GPT and MBR), i only greeted by grub shell. Then i try to burn it with both rufus dd mode and dd, i got the grub menu.
When i burn with rufus dd mode in MBR, in grub menu selection, i tried to edit the boot option, i edit the initrd entry to get on similar position with the vmlinuz img entry then boot up. It hang a bit then it will reboot by itself. I tried the firmware grub menu, edit it the same and made 2 entry of initrd to seperate the seiba.zst and the firmware.zst on different line, it will hang a bit then it will show this kernel panic.
When i tried with balena and dd, this didn't happen and it will only hang after the grub menu
from ataraxia.
Well if you removed "seiba.zst" then basically the os won't load because
it's very small version of ataraxiaср, 14 апр. 2021 г., 08:51 Abdul Subayu @.***>:
Also i want to give update that i tried to redownload the march snapshot
today, and give it another try. I try burn it with rufus iso mode (both GPT
and MBR), i only greeted by grub shell. Then i try to burn it with both
rufus dd mode and dd, i got the grub menu.When i burn with rufus dd mode in MBR, in grub menu selection, i tried to
edit the boot option, i edit the initrd entry to get on similar position
with the vmlinuz img entry then boot up. It hang a bit then it will reboot
by itself. I tried the firmware grub menu, edit it the same and made 2
entry of initrd to seperate the seiba.zst and the firmware.zst on different
line, it will hang a bit then it will show this kernel panic.
[image: IMG_20210414_123432.jpg]
https://user-images.githubusercontent.com/34985816/114660719-fb43be80-9d1f-11eb-86ec-db1dfe0de352.jpgWhen i tried with balena and dd, this didn't happen and it will only hang
after the grub menu—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
#246 (comment),
or unsubscribe
https://github.com/notifications/unsubscribe-auth/ALI22EJ7I5DLZXT6WXX5FL3TIUUN5ANCNFSM42PCSJMQ
.
I didn't remove it, i just separate the seiba.zst and firmware.zst to different line. From this
linux /seiba.img
initrd. /seiba.zst /seiba/firmware.zst
To this
linux. /seiba.img
initrd. /seiba.zst
initrd. /seiba/firmware.zst
And by i mean that change the initrd entry to similar position with the .img is like this
Default:
linux. /seiba.img
initrd. (6 space) /seiba.zst
To this:
linux. /seiba.img
initrd. (4 space)/seiba.zst
from ataraxia.
grub does not work that way... ср, 14 апр. 2021 г., 09:05 Abdul Subayu @.>:
…
Well if you removed "seiba.zst" then basically the os won't load because it's very small version of ataraxia ср, 14 апр. 2021 г., 08:51 Abdul Subayu @.>: Also i want to give update that i tried to redownload the march snapshot today, and give it another try. I try burn it with rufus iso mode (both GPT and MBR), i only greeted by grub shell. Then i try to burn it with both rufus dd mode and dd, i got the grub menu. When i burn with rufus dd mode in MBR, in grub menu selection, i tried to edit the boot option, i edit the initrd entry to get on similar position with the vmlinuz img entry then boot up. It hang a bit then it will reboot by itself. I tried the firmware grub menu, edit it the same and made 2 entry of initrd to seperate the seiba.zst and the firmware.zst on different line, it will hang a bit then it will show this kernel panic. [image: IMG_20210414_123432.jpg] https://user-images.githubusercontent.com/34985816/114660719-fb43be80-9d1f-11eb-86ec-db1dfe0de352.jpg When i tried with balena and dd, this didn't happen and it will only hang after the grub menu — You are receiving this because you commented. Reply to this email directly, view it on GitHub #246 (comment) <#246 (comment)> , or unsubscribe https://github.com/notifications/unsubscribe-auth/ALI22EJ7I5DLZXT6WXX5FL3TIUUN5ANCNFSM42PCSJMQ . I didn't remove it, i just separate the seiba.zst and firmware.zst to different line. From this linux /seiba.img initrd. /seiba.zst /seiba/firmware.zst To this linux. /seiba.img initrd. /seiba.zst initrd. /seiba/firmware.zst And by i mean that change the initrd entry to similar position with the .img is like this Default: linux. /seiba.img initrd. /seiba.zst To this: linux. /seiba.img initrd. /seiba.zst — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#246 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/ALI22EPT4HYV3IJP4XDLHVTTIUWCHANCNFSM42PCSJMQ .
Yeah sorry, i just try if it will do something :(
from ataraxia.
I think I'll try ataraxia another go in the future then. Thank you for all the respond. Sorry if i'm such a bother guys
from ataraxia.
Don't worry neptalactone! You're just learning like all of us! Thank you for trying it out!
from ataraxia.
WIll try in a few, since i got this same laptop.
from ataraxia.
I think I'll try ataraxia another go in the future then. Thank you for all the respond. Sorry if i'm such a bother guys
Try using this to bootstrap Ataraxia and follow the install guide past the network part: https://www.system-rescue.org/Download/
from ataraxia.
@neptalactone try to boot from recent (28 march) iso and add "noacpi" in cmdline
from ataraxia.
@neptalactone try new iso
Whoa i just realized this issue has been reopen. Thanks for all the hardwork! I'll try it this weekend. I've been busy with work lately. Once again. Thank you very much
from ataraxia.
@neptalactone try new iso
Whoa i just realized this issue has been reopen. Thanks for all the hardwork! I'll try it this weekend. I've been busy with work lately. Once again. Thank you very much
Does new ISO work?
from ataraxia.
@neptalactone try new iso
Whoa i just realized this issue has been reopen. Thanks for all the hardwork! I'll try it this weekend. I've been busy with work lately. Once again. Thank you very much
Does new ISO work?
Sorry i forgot to reply. Yes it is working now. Great! Thanks very much. Is there no grub template? My laptop kinda weird, everytime i try to make efi stub entry with efibootmgr, when i restart, the entry just gone. But i still manage to boot using refind
from ataraxia.
@neptalactone try new iso
Whoa i just realized this issue has been reopen. Thanks for all the hardwork! I'll try it this weekend. I've been busy with work lately. Once again. Thank you very much
Does new ISO work?
Sorry i forgot to reply. Yes it is working now. Great! Thanks very much. Is there no grub template? My laptop kinda weird, everytime i try to make efi stub entry with efibootmgr, when i restart, the entry just gone. But i still manage to boot using refind
I actually seem to have the same laptop, and had the same thing happen. I hope to actually port refind to Ataraxia Linux in the future. I'd stick to using refind for Ataraxia with ur config. Just make sure you created a "refind_linux.conf" with all of the stuff u want! And Grub is only on ISOS. Closing.
from ataraxia.
Related Issues (20)
- Compilation fails for xfce because dependency xfce4-notifyd ist not met, although it's installed HOT 1
- neko upgrade: building package gcr fails HOT 3
- startxfce4 -> system hangs HOT 4
- Support for dynamically linked Firefox and Thunderbird?
- Cannot build libxrender. HOT 3
- shutdown command does nothing.
- Cannot build aalib.
- Cannot build soundtouch. HOT 2
- Cannot build perl. HOT 1
- Cannot build mupdf. HOT 4
- Cannot build sane. HOT 2
- From base system Snapshot on March 10, 2020 neko up problem HOT 4
- "Featured" snapshot with working GUI?
- Minor English changes to the installation page
- Package 'highlight' has wrong URL
- Error compiling on every attempted build
- Relicense vis, lua-lpeg
- Efistub error HOT 1
- You apparently are not using GNU almost anything so why GNU/Linux HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from ataraxia.