art103 / ar-t6 Goto Github PK

all across GUI the switch editors should allow !SWx so a new specialized func (gui_edit_swich) should be introduced.

Nice project indeed. What is the current status of the firmware? Can it completely replace the factory version?

Can you outline the way you are flashing firmware to the tx? Have you soldered a wire to the boot1 pin that you pull high or are you using another method?

Hi,

I tried the mixer menu and there are some error concerning the navigation flow. In my repository I have implemented an additional step for the submenues to work. Shall I push them to the repo?

bar char | shows as curly }
star * looks bad

The github here is not set up to autocorrect newlines. Need to create project specific .gitattributes file to make it correct newlines. What should we pick? Originally it is CRLF ....so CR or CRLF? In my private fork i have set it up to CR (unix) style and it works fine on Linux (ya!). Need to verify this on Windows and then pull it to main.

When enabling more than three points to edit, the firmware does not navigate in model menu. When enabling 5 editable points the firmware fails to load completely

With only two directions on the roller (compared to four on the turnigy9x) text entry is not as easy as it could be.
It also appears broken in some cases - try setting your name in the general settings menu.

This will allow user to do a "factory reset" and start from scratch.

Most developers have a *nix environment with GNU MAKE building tool. Migrating to a bare MAKEFILE build would attract more developers to this project (me included). I myself have a FlySky TF-T6 and am willing to use and improve this firmware, but I don't use neither Eclipe nor CodeSourcery ARM toolchain. Just a simple MAKE + GNU GCC.