Acer Aspire 7 A715-42G Opencore EFI and some info for running macOS Ventura 13.6.1.
If someone succeeds Leave a comment and tell me if you want to try it hahaha
Specifications
Item
Info
Model
Acer Aspire 7 A715-42G
CPU
AMD Ryzen™ 5 5500U Processor
DGPU
Nvidia Geforce GTX 1650 4GB
RAM 1
Hynix DDR4 8GB 3200 MHz
RAM 2
TRANSCEND DDR4 8GB 3200 MHz
Disk
WD Black SN770 1TB (Run on PciGen3)
WIFI
Intel® Wi-Fi 6E AX200 160Mhz
Bluetooth
With Intel combo card
Ethernet
Realtek RTL8111
Audio
Realtek ALC255
LCD Panel
15.6 FHD IPS 144Hz
Opencore Version
0.9.4
SMBIOS used
MacBookPro16,3 (Need to enter your information generated by GenSMBIOS)
Completely disabled using (SSDT-dGPU-Off.aml) and a boot arg -wegnoegpu
Brightness Control
✅
HDMI V out
✅
Audio Not tested yet
USB
✅
All ports working
Keyboard
✅
Audio
✅
AppleALC kext working with layout-id 31
Ethernet
✅
RealtekRTL8111 Kext
Intel WIFI
✅
AirportItlwm Kext
Battery
✅
VoodooBatteryStatus Kext
Shutdown/Reboot
✅
Sometimes you have to reboot 2-3 times to enter Mac OS.
What's not Working
Item
Status
Notes
Internal Mic
❓
Known AMD Issue, works with external ones
External Mic 3.5 Jack
❓
Not Fix This
Bluetooth
❓
Not Fix This
Trackpad
❓
Not Fix This
Sleep
❓
Not Fix This
WebCam
❓
Not Fix This
Hardware Acceleration
❓
Apps requiring hardware acceleration crashes, more info here. This can be prevented by disabling hardware acceleration on those apps or by increasing the VRAM size to 1GB+. You can use Smokeless UMAF AMD Tool.
Hey, I'm trying to boot Ventura on my laptop (same as yours but Intel). I noticed that you have "DevirtualiseMmio" disabled on your config without any whitelists, contrary to what's on Dortania's guide. I found the same here https://github.com/AbhaySingh15/Acer-aspire-7-A715-75G-Opencore-EFI on the Intel variant config. My hackintosh hangs after "PCI configuration end" with DevirtualiseMmio enabled, but if I disable it I get "vm_shared_region_start_address() failed". I tried the Intel config I linked earlier on Monterey/Ventura and I'm getting the same error. Did you face any similar problems during your setup? If so, can you point me in the right direction?
Thanks!