arijav / arilosprinkler-hardware Goto Github PK

Brownout reset when actuating 2 valves at the same time, wifi on and Lora sending. Solved by adding additional capacitors in the 3.3V and 5V nets (tested with 470uF in each net, to be checked if 100uF is sufficient). Has to be modified in schematic/layout or by disabling brownout resets in the MirrorLink driver (not recommended, can be done by uncommenting the define #define DISABLE_ESP32_BROWNOUT in MirrorLink.h)

Hello,
I submitted your PCB to JLCPCB but many components are missing.
Can you share me your BOM file and the placement file?
Note: I use EASYEDA to generate bom file from your pcb file.

Thanks;

Integrate MirrorLink status in LCD driver. By pressing a button (check no function collision) show the following information:

• MirrorLink state
• MirrorLink channel
• MirrorLink power

What size are the green connectors? 2pin 6pin 8pin

Thank you!

Recover status from Station output states in Remote and show it in the webpage. Offer in the webpage the possibility to select if the outputs of the master or of extenders (by number) shall be shown

Evaluate further loss of connection on station side and lack of re-association possibility. In one situation it happened, lack of logging data. Check possibility of being in a specific state (such as NONCEUPDATE) and issue resetting to default channel or max power

Improve the re-association process speed in case of communication issue. On the remote side implement frequency hopping as well (as it is the case for regular messages) and on the station side even in RECEIVE status, in case of decryption error check if it is an association package and react.

Hello, I have a problem with generating the gerber file in kicat 6, I have errors on the jlcpcb site
Analysis Results
layers: -1
minimum trace width:> = 10 mil
minimum trace spacing:> = 10 miles
minimum drill size: null
width: null
height: null
Unsupported Gerber files
Can not identify the board outline

Modify ATPC to seek for positive SNR as well and not focus solely on the complete Power Budget. Lora can even receive and decode messages with negative SNR but the probability of errors is higher

Nice project I was toying with the idea of modify your design to my needs mainly to allow more valves in the same board, when I try to open the project with Kicad 5 (It seems it was created with version 4.0) some of the symbols are not loaded (also missing the cache file) , is it possible to add the file to the repo? Great work!

Payload size to be increased to 40bit plus CommandID (6bit) from the total of 64bit for messages from Remote to Station. To be increased to 24bit plus CommandID from 64bit for answers from Station to Remote.

Use the following Message Format:
https://docs.google.com/spreadsheets/d/1fjUWQQS2JXz_DovBJfoWVXcFRb0cYOOFrMIRAy7UrWs/edit#gid=0

Improve the protocol to allow operation of several pairs of remotes and stations within range. The current protocol resets the state to ASSOCIATION in case a package is wrongly decrypted on the station side. Modify to ignore these messages allowing other pairs of remotes/stations to operate in the same area. The only situation to set the state to ASSOCIATION in this case would be timeout or collision in reception (CRC error)