A simple Tetris game simulation on ATmega32 using Proteus. This was CSE 316 Sessional Project. Required Software:

1. Proteus
2. Microchip Studio

How to Run:

1. Install Proteus in your OS.
2. Open the tetris.pdsprj file in Proteus.
3. Load .hex file under Tetris/Circuit and Codes/Codes/ATMega1/atmega1/atmega1/Debug/ to ATmega1.
4. Load .hex file under Tetris/Circuit and Codes/Codes/ATMega2/LCD/LCD/Debug/ to ATmega2.
5. Run the simulation.

How to Play:

1. To Start the game, press Start button.
2. To move the Blocks, press Left or Right button.
3. To rotate a Block, press Rotate button.
4. Your score will increase if you match a row. Your score will be shown in the LCD display
5. If your board is filled completely, your game will be finished. You will be shown a final score.

Required Hardwares:

1. Two 8*8 LED Matrix.
2. Two ATmega32 Microprocessor.
3. One LM016L 16*2 LCD Display.
4. Four Push Buttons.
5. Two 74HC138 3 to 8 Line Inverting Decoder/ Demultiplexer.
6. Resistors.

Group Members:

1. Arif Shariar Rahman (1705095)
2. Sadia Saman (1705102)

Project Supervisor Masum Mushfiq

Demonstration Video Watch our project demonstration video here!