👟 Reproduction steps

Try to create a project using console

👍 Expected behavior

It should create the project

👎 Actual Behavior

The server returns server error and the project is not creating

🎲 Appwrite version

Version 1.1.x

💻 Operating system

MacOS

🧱 Your Environment

No response

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

1. Upgrade to Pro plan on Appwrite Cloud
2. Create a new Storage Bucket (default upload size 3 GB)
3. Click on "Create file" button

👍 Expected behavior

👎 Actual Behavior

🎲 Appwrite version

Appwrite Cloud

💻 Operating system

MacOS

🧱 Your Environment

No response

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

After some time, randomly, The console starts showing all texts underlined, and some elements like buttons are misformed. This seemed to be a Cloudflare caching issue, since after purging cache and deleting all browser data it started working again, but after setting a rule to override caching, the same error persists some times.

This happens in Firefox mainly and some times in chrome.

👍 Expected behavior

Obviously that should not happen

👎 Actual Behavior

Errors and warnings being displayed in the browser console:

Realtime got disconnected. Reconnect will be attempted in 1 seconds. <empty string> [_layout.svelte.3d312bd3.js:5:164](https://dh-sw.net/_app/immutable/entry/_layout.svelte.3d312bd3.js)
    Immutable 3
        co
        createSocket
        i

Ignoring unsupported entryTypes: layout-shift.

The resource at “https://sdh-sw.net/fonts/inter/inter-v8-latin-600.woff2” preloaded with link preload was not used within a few seconds. Make sure all preload tag attributes are set correctly. platforms

The resource at “https://dh-sw.net/fonts/inter/inter-v8-latin-regular.woff2” preloaded with link preload was not used within a few seconds. Make sure all preload tag attributes are set correctly. platforms

The resource at “https://dh-sw.net/fonts/poppins/poppins-v19-latin-500.woff2” preloaded with link preload was not used within a few seconds. Make sure all preload tag attributes are set correctly. platforms

The resource at “https://dh-sw.net/fonts/poppins/poppins-v19-latin-600.woff2” preloaded with link preload was not used within a few seconds. Make sure all preload tag attributes are set correctly. platforms

The resource at “https://dh-sw.net/fonts/poppins/poppins-v19-latin-700.woff2” preloaded with link preload was not used within a few seconds. Make sure all preload tag attributes are set correctly. platforms

The resource at “https://dh-sw.net/fonts/source-code-pro/source-code-pro-v20-latin-regular.woff2” preloaded with link preload was not used within a few seconds . Make sure all preload tag attributes are set correctly.

🎲 Appwrite version

Version 1.3.x

💻 Operating system

Windows

🧱 Your Environment

Cloudflare, Ubuntu server (latest version), Firefox

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

The dash does show all the info on a newly created projects but always ends up showing 0 for all info on the next day.
So far this issue has affected all my Appwrite instances, local or cloud.

[Error] Method: GET
[Error] URL: /v1/account
[Error] Type: Appwrite\Extend\Exception
[Error] Message: Project with the requested ID could not be found. Please check the value of the X-Appwrite-Project header to ensure the correct project ID is being used.
[Error] File: /usr/src/code/app/controllers/general.php
[Error] Line: 143
[Error] Timestamp: 2022-11-25T06:50:26+00:00
[Error] Method: GET
[Error] URL: /v1/account
[Error] Type: Appwrite\Extend\Exception
[Error] Message: Project with the requested ID could not be found. Please check the value of the X-Appwrite-Project header to ensure the correct project ID is being used.
[Error] File: /usr/src/code/app/controllers/general.php
[Error] Line: 143
[2022-11-25 06:50:29 *15.4]     NOTICE  ProcessFactory::finish() (ERRNO 1004): send 1970 bytes failed, because session#35 is closed
[2022-11-25 06:50:29 *15.4]     NOTICE  ProcessFactory::end() (ERRNO 1005): session#35 is closed
[2022-11-25 06:50:52 *16.5]     NOTICE  ProcessFactory::finish() (ERRNO 1004): send 9793 bytes failed, because session#36 is closed
[2022-11-25 06:50:52 *16.5]     NOTICE  ProcessFactory::end() (ERRNO 1005): session#36 is closed
[Error] Timestamp: 2022-11-25T06:51:04+00:00
[Error] Method: GET
[Error] URL: /v1/account
[Error] Type: Appwrite\Extend\Exception
[Error] Message: Project with the requested ID could not be found. Please check the value of the X-Appwrite-Project header to ensure the correct project ID is being used.
[Error] File: /usr/src/code/app/controllers/general.php

👩‍⚕️ Running Appwrite Doctor for version 1.1.2 ...

Checking for production best practices...
🟢 Hostname has a public suffix (mydomain)
🟢 CNAME target has a public suffix (mydomain)
🟢 Using a unique secret key for encryption
🟢 App environment is set for production
🟢 Abuse protection is enabled
🟢 Console access limits are enabled
🔴 HTTPS force option is disabled
🔴 Logging adapter is disabled

Checking connectivity...
Database............connected 👍
Queue...............connected 👍
Cache...............connected 👍
SMTP................connected 👍
StatsD..............connected 👍
InfluxDB............connected 👍

Checking volumes...
🟢 Uploads Volume is readable
🟢 Uploads Volume is writeable
🟢 Cache Volume is readable
🟢 Cache Volume is writeable
🟢 Config Volume is readable
🟢 Config Volume is writeable
🟢 Certs Volume is readable
🟢 Certs Volume is writeable

Checking disk space usage...
🟢 Uploads Volume has 43.10GB free space (17.54% used)
🟢 Cache Volume has 43.10GB free space (17.54% used)
🟢 Config Volume has 43.10GB free space (17.54% used)
🟢 Certs Volume has 43.10GB free space (17.54% used)

👍 Expected behavior

For the dash to show all the info

👎 Actual Behavior

Dash ends up showing 0 info

🎲 Appwrite version

Different version (specify in environment)

💻 Operating system

Linux

🧱 Your Environment

Appwrite v1.1.1 & v.1.1.2
Linode instance - archlinux, ubuntu 22.04
Local docker on arch

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

Do a fresh install
Singup, Login
Create a project and press invite,
In pop-up add dummy name and email and press send invite.

👍 Expected behavior

On error, should format html code as expected, not as string. And the link should lead to appwrite.io/ as in this example it would lead to domain.com/docs/email-delivery which doesn't exist.

👎 Actual Behavior

🎲 Appwrite version

Version 1.3.x

💻 Operating system

Linux

🧱 Your Environment

Cloudflare proxy domain to server, nginx manager to proxy to local container.

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

🔖 Feature description

We should add paths-ignore to event triggering config since running tests where it's not needed is a bit unnecessary...like for the .md files

🎤 Pitch

paths-ignore:
      - '.gitignore'
      - '**.md'

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

1. Navigate to the Appwrite dashboard.
2. Create a new project.
3. Enter a project ID containing alpha numeric characters, non-leading hyphens, periods, and underscores (example project_1).
4. Observe the error or unexpected behavior.

👍 Expected behavior

From the code in

appwrite\src\Appwrite\Utopia\Database\Validator\ProjectId.php

It can be seen that the regex doesn't accept underscores as well as leading hyphens and periods in projectID.

The error message provided, also has a slight correction, that it only accepts non-leading hyphens.

Thus, the expected behavior, would be, the following:

👎 Actual Behavior

It currently shows wrong statement, that it accepts underscores as well as periods

This causes confusion among people, not sure what they did wrong, as they were correctly following the instructions

🎲 Appwrite version

Appwrite Cloud

💻 Operating system

Linux

🧱 Your Environment

No response

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

When someone tries to create an enum and set it as required, then the field Default value also becomes required, which makes it impossible to create the enum field.

More details are here:
appwrite/appwrite#5391

👍 Expected behavior

Let the user create the enum and make the Default value not required.

I think

👎 Actual Behavior

The Default value is required, and you can't (Which makes sense) select any value.

In the code:
console/project-[project]/databases/database-[database]/collection-[collection]/attributes/enum.svelte

<Enum
    id="default"
    label="Default value"
    attribute={{
        key: data.key,
        type: 'string',
        status: 'enabled',
        format: 'enum',
        elements: data.elements ?? [],
        required: data.required,
        default: data.default
    }}
    bind:value={data.default} />
<InputChoice id="required" label="Required" bind:value={data.required} disabled={data.array}>
    Indicate whether this is a required attribute
</InputChoice>

You can notice that the Enum required attribute is attached to the Required option.

From my POV it seems like the required attribute should be flipped or removed completely.

🎲 Appwrite version

Version 1.3.x

💻 Operating system

Linux

🧱 Your Environment

No response

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

🔖 Feature description

You guys should add search / filters to the collections.

🎤 Pitch

it's difficult to find document you guys add search / filters to the collections.

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

🔖 Feature description

Currently, on the Auth page, there is no way to filter users based on specific fields such as Email, Name, Status, etc. Therefore, I am requesting a feature to be implemented that would allow filtering users by specific fields.

🎤 Pitch

Adding this feature will address the challenge of manually filtering users based on specific fields, resulting in a significant improvement in user experience.

For instance, consider a scenario where I have over 1000 users and need to efficiently filter them by status, whether verified or unverified.

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

Appwrite database > collection > attributes > create attribute

👍 Expected behavior

In some cases it might be possible that a user wants to create an attribute that is both an array and also required, so making it an either-or case is not nice IMO.

👎 Actual Behavior

Currently it just allows u to choose one:

🎲 Appwrite version

Appwrite Cloud

💻 Operating system

Windows

🧱 Your Environment

No response

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

See the followings -

👍 Expected behavior

Add relevant spacing / padding.
Also maybe keep the boxing similar to other fields like -

👎 Actual Behavior

No space at the start.

🎲 Appwrite version

Version 1.4.x

💻 Operating system

Linux

🧱 Your Environment

No response

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

🔖 Feature description

Hello,

I'm working with large datasets. I noticed that it takes me 10s of seconds to change a single text field of a document.
By inspecting the network call I noticed that the Console uploaded the whole document when clicking on the "update" field.
The more data I get the slower the Console becomes.

It could be a great (and quick to implement) improvement to only update the field that was actually edited.

In my case, the collection has a relationship array, containing multiple MBs of nested data.

🎤 Pitch

It would considerably improve the user experience while working with big databases.

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

1. Create a user.
2. Go to the Auth Section.
3. Click on the user.
4. Navigate to the Sessions

👍 Expected behavior

The contents should not overflow.

👎 Actual Behavior

Contents(the table) is overflowing in the x-direction

🎲 Appwrite version

Version 1.4.x

💻 Operating system

Windows

🧱 Your Environment

I am using Appwrite 1.4.9

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

1. Go to Auth tab
2. Select any user
3. Go to Sessions tab
4. Delete any session
5. After deletion popup is not closing

👍 Expected behavior

Popup should close after the success of deletion

👎 Actual Behavior

The popup persists and after clicking again it shows the session is not found because ultimately session is being deleted.

🎲 Appwrite version

Version 1.2.x

💻 Operating system

Windows

🧱 Your Environment

I have used the docker container to pull the image appwrite/appwrite:1.2.1

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

I made a session for a user from React Native Android application

👍 Expected behavior

Some Image should be there

👎 Actual Behavior

Image is not there

🎲 Appwrite version

Appwrite Cloud

💻 Operating system

Windows

🧱 Your Environment

No response

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

Switching to other collections from the side panel to a collection with a lot of attributes results in a fixed-width unscrollable horizontal table.

👍 Expected behavior

Display the full extent of the attribute name and fit relevant attribute content.

👎 Actual Behavior

Having a lot of attributes will divide the space between all the elements.

🎲 Appwrite version

Version 1.3.x

💻 Operating system

Linux

🧱 Your Environment

No response

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

1. create a collection with an attribute of type Datetime.
2. create a document in that collection and pick any date for that attribute
3. now open the created document and edit it by deleting/clearing the date
4. click update
5. refresh the page to get the new document values

👍 Expected behavior

the date attribute shows no date

👎 Actual Behavior

the date attribute shows current date

🎲 Appwrite version

Version 1.4.x

💻 Operating system

Linux

🧱 Your Environment

appwrite 1.4.3

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

1. Click Execute now from a function's Executions tab\
2. Click the 'x' at the top right

👍 Expected behavior

The modal closes

👎 Actual Behavior

The modal doesn't close

🎲 Appwrite version

Appwrite Cloud

💻 Operating system

Linux

🧱 Your Environment

No response

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

Head to the functions settings screen and try to update the function timeout beyond 900 seconds.

👍 Expected behavior

The function timeout is updated

👎 Actual Behavior

Timeout cannot be updated beyond 900 due to the limit being hardcoded in the console
https://github.com/appwrite/console/blob/main/src/routes/console/project-%5Bproject%5D/functions/function-%5Bfunction%5D/settings/%2Bpage.svelte#L476

🎲 Appwrite version

Version 1.2.x

💻 Operating system

Linux

🧱 Your Environment

No response

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

Hi 👋🏽 I know this is a really minor detail, but it bugged me today, so I figured I might as well report it.

1. In a Collection, add a new attribute
2. Give it a key and set the "Attribute type" to Boolean
3. Set "Default value" to False
4. Save

👍 Expected behavior

The default value should be false

👎 Actual Behavior

It always set to undefined unless a default of True is selected

🎲 Appwrite version

Version 1.2.x

💻 Operating system

Linux

🧱 Your Environment

• Appwrite 1.2.1 running on VPS (Ubuntu)
• Using Web SDK

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

When I click on some Delete buttons (APIkeys, users, collections...), their confirmation dialogs appear out of the screen, at least partially, making it impossible to click on buttons. And it is not possible to scroll to make the dialogs appear.

Inspecting the HTML and CSS, it looks like a CSS rule, @layer the-new-css-reset { does not include the <dialog> tag. When I manually add dialog, to the list, it works as expected.

:where(:not(html,
 dialog,
 iframe,
 canvas,
...

👍 Expected behavior

The dialogs should be centered on the screen, or at least, all their content must be accessible.

👎 Actual Behavior

Dialogs are truncated or invisible. This picture shows the bottom of my browser window:

🎲 Appwrite version

Version 1.3.x

💻 Operating system

Linux

🧱 Your Environment

Self-hosted Appwrite 1.3.7

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

When i am deleting my custom domain a blank screen appears and the modal for deleting is not showing there.

👍 Expected behavior

The modal should be in the center.
I checked it through inspect in my browser and from there I found out that it is settled in the bottom instead of center.

👎 Actual Behavior

Here's the demo of this issue:
Screencast from 13-06-23 10:31:19 PM IST.webm
Also some other pages have the same problems too.
Like create collection page:

🎲 Appwrite version

Appwrite Cloud

💻 Operating system

Linux

🧱 Your Environment

No response

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

In Appwrite Cloud, I change the Reply To field and the Update button stays disabled. For it to enable, I need to change another field like the Subject field.

👍 Expected behavior

I should be able to update the Reply To field by itself.

👎 Actual Behavior

The field remains disabled.

🎲 Appwrite version

Appwrite Cloud

💻 Operating system

MacOS

🧱 Your Environment

No response

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

1. Correct the content so that it organizes well and fixes some of the unnecessary gaps.

2. So that the content doesn't overflow from the page and will manage it in a single window.

3. Will reduce the gap b/w signup and name fields.

👍 Expected behavior

So the above-mentioned changes will give by default full page view for the signUp page and the content would not get overflow .

👎 Actual Behavior

Before organising up the code:

After orgainising up the code:

🎲 Appwrite version

Appwrite Cloud

💻 Operating system

Windows

🧱 Your Environment

Pls assign me the same issue and I will raise up the PR ASAP and have full understanding of the pages how to organise up the code for such issues.

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

• Go to any project and try to add a custom domain
• Enter a domain ending with .community

👍 Expected behavior

The form should accept .community domains and move on to the next step

👎 Actual Behavior

You get a "Must be a valid domain error"

Note that it is possible to bypass this error by changing the validation pattern on the form

🎲 Appwrite version

Appwrite Cloud

💻 Operating system

Windows

🧱 Your Environment

No response

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

• Navigate to Collections : Go to the "Collections" section in the sidebar.

• Open Your Collection : Click on the collection where the related attribute is located.

• Update Values : Click on any value Try to update it.

• Check Sidebar Again : Return to the sidebar and check if the values are hidden or visible.

👍 Expected behavior

It should show all the values which are hidden in the sidebar.

👎 Actual Behavior

The values actually got hidden.

🎲 Appwrite version

Appwrite Cloud

💻 Operating system

Linux

🧱 Your Environment

OS : Ubuntu 22
Browser : Firefox

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

🔖 Feature description

Add an option to select which layout to use (fixed width vs full width). A way to implement this is similar to how you would select whether to use light/dark/system theme.

🎤 Pitch

Right now appwrite has a max width of 1260px for its main content. On a wide screen monitor, lots of space is wasted - especially when I am looking at documents that have multiple attributes. I barely see any data at all without having to open each document in a separate tab. When I am debugging and want to look at the documents in a tabular manner to easily compare the values etc. It's really hard to do that. The table cells are too squished together.

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

When I make an Index that would throw an error/fail it shows it failed but it also pops a small banner in the top right corner saying the index was created with a green tick, seems a bit off.

👍 Expected behavior

It should either change the banner to something that would indicate it failed or not show it at all.

👎 Actual Behavior

🎲 Appwrite version

Version 1.3.x

💻 Operating system

MacOS

🧱 Your Environment

Appwrite Cloud Console (In Safari)

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

Go to the console, click Auth, and select one of the timer periods: 24h, 30d, 90d

👍 Expected behavior

It will show the cumulative registered users for that time period selected

👎 Actual Behavior

It shows the registered users based on the last 'bar' from the graph, not the cumulative number based on the time selected:

24 hours:

30d:

90days:

🎲 Appwrite version

Version 1.3.x

💻 Operating system

Linux

🧱 Your Environment

No response

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

click on upgrade plan
enter wrong card details
the error box pops up but doesn't show what is the error text?

👍 Expected behavior

It should show error message also

👎 Actual Behavior

The error box is empty

🎲 Appwrite version

Appwrite Cloud

💻 Operating system

Windows

🧱 Your Environment

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

💭 Description

When creating a new Apple App from the console and reaching step 3, the following code snippet appears:

let client = Client()
    .setEndpoint("http://localhost:3000/v1")
    .setProject("6496fd6f36368405265d")
    .setSelfSigned(status: true) // For self signed certificates, only use for development

When implemented in Xcode, it throws the following error: Extraneous argument label 'status:' in call, since the correct signature for the setSelfSigned method from the sdk-for-apple repo on line 145, requires no implementation of the status: label.

open func setSelfSigned(_ status: Bool = true) -> Client

Also, wasn't sure if this counts as a bug or a documentation issue, so I went with documentation. Hopefully it's not a problem.

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

incorrect description at "Update Expiration Date" Input inside API edit form.

Flow: appwrite -> myProject -> Integrations -> API Keys -> myAPI -> "Update Expiration Date" Input

👍 Expected behavior

The description should have been "Specify an expiration date"

👎 Actual Behavior

The description is "Choose any name that will help you distinguish between API keys."

🎲 Appwrite version

Version 1.2.x

💻 Operating system

Windows

🧱 Your Environment

No response

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

This issue was uploaded on appwrite/appwrite by @stnguyen90.
URL of original issue: here

1. Have multiple collections with multiple documents
2. Have your view set up so the ID is truncated
3. Switch between Collections

👍 Expected behavior

The IDs update

👎 Actual Behavior

The IDs don't update:

🎲 Appwrite version

Appwrite Cloud

💻 Operating system

Linux

🧱 Your Environment

The video was recorded on an older version, but the bug is still prevalent on Appwrite Cloud (1.4.4).

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

🔖 Feature description

Prerender the login page for improved core web vitals

🎤 Pitch

While investigating SvelteKit applications in the wild, I found that AppWrite consoles are written in SvelteKit and fail core web vitals. E.g. here's one such URL: https://auth.lucas-cm.com.br/login

A big contributor to this is that SSR is disabled, so just a blank page loads initially.

This could best be avoided by prerendering the login page.

(Alternately, the largest image on the page could be preloaded and you could render some image, background image, or text while the JavaScript is being fetched rather than leaving the page blank, but this would be more work, a worse user experience, and probably still worse on core web vitals)

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

• Make a new attribute with Boolean data type in an existing or new collection with required constraint
• Insert a new document through console in the same collection
• Try to set the Boolean attribute to false

👍 Expected behavior

I think we should be able to leave it blank and default to false?

👎 Actual Behavior

Leaving it blank is not acceptable

🎲 Appwrite version

Version 1.2.x

💻 Operating system

Linux

🧱 Your Environment

Appwrite Console 1.2.1

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

This is necessary for enterprise use cases when working with confidential or proprietary data that must not leave the premises.
While you have promp-engineered ChatGPT to only respond to queries about the Appwrite console, the contents of the query are nevertheless sent to OpenAI for inference, including any proprietary or confidential data that the user might erroneously insert into the prompt.
To be able to ensure that company-wide infosec policies are followed, it is adamant that the ability to use the built-in AI can be optionally disabled by a system administrator.

👟 Reproduction steps

In this file
https://github.com/appwrite/console/blob/9174d8f8cb584744dd7a53f69d324f490ee82ee3/src/lib/layout/logs.svelte

Two dynamically generated links use a singular path instead of a plural one.

deployment instead of deployments

execution instead of executions

👍 Expected behavior

Links should point to

• Deployments endpoint
• Executions endpoint

👎 Actual Behavior

...

🎲 Appwrite version

Version 1.3.x

💻 Operating system

Linux

🧱 Your Environment

No response

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

• Click on any OAuth2 Provider in settings
• fill the form
• Click on update

👍 Expected behavior

It should show "enabled" in the toast when enabling an OAuth2 Provider instead of showing "disabled".

👎 Actual Behavior

The toast is indicating that github authentication has been disabled even though it's enabled.

🎲 Appwrite version

Version 1.2.x

💻 Operating system

Linux

🧱 Your Environment

Appwrite Console

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

Under any section Auth, Storage, Database, Functions.

When pressed play/pause⏯️ button. It redirects to OVERVIEW page.

👍 Expected behavior

Click event of play/pause⏯️ button. Should have no effect on website navigation.

👎 Actual Behavior

🎲 Appwrite version

Appwrite Cloud

💻 Operating system

Windows

🧱 Your Environment

No response

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

Go to Users tab on Google Chrome on phone and there is no text.

👍 Expected behavior

It should list all users.

👎 Actual Behavior

No text.

🎲 Appwrite version

Appwrite Cloud

💻 Operating system

Linux

🧱 Your Environment

No response

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

💭 Description

Add steps in contributing guildelines for project development setup including :

1. Cloning Repo
2. Installing dependencies
3. Creating .env file from sample.env

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

• I cloned the console repo for appwrite
• I configured the .env.example file with the credentials of my local instance of Appwrite
• After installing the dependencies on my local system just did npm run dev
• The app didn't even run, just throws the error ReferenceError: window is not defined. The error is coming form src/lib/stores/sdk.ts.
• Here in the sdk.ts file on line number 16 the error is seems to be located at

👍 Expected behavior

After configuring the env file and installing the dependencies the app is suppose to run without errors

👎 Actual Behavior

The app is throwing this error

Here is the typescript error in src/lib/stores/sdk.ts

🎲 Appwrite version

Version 1.1.x

💻 Operating system

Windows

🧱 Your Environment

I'm running Appwrite on my local machine using docker.

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

Go to:
Functions -> Your function -> Execute now -> Enable "show example json"

👍 Expected behavior

The example JSON has incorrect syntax:

👎 Actual Behavior

The keys should be strings only.

🎲 Appwrite version

Appwrite Cloud

💻 Operating system

Windows

🧱 Your Environment

No response

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

🔖 Feature description

You guys should add search to the documents.

🎤 Pitch

it's difficult to find document you guys add search to the documents.

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

1. Create a new project or use existing project
2. Go to functions
3. Create a new manual function
4. Select or drop a file with any extension other than .gz
5. Click next and you are able to move to next step

👍 Expected behavior

Should validate the input before moving to next step

👎 Actual Behavior

Not properly validating before moving to next step, just the helper text says "Invalid file extension"

🎲 Appwrite version

Appwrite Cloud

💻 Operating system

Windows

🧱 Your Environment

No response

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

1. Go to Auth
2. Click on settings
3. Click on any OAuth 2 providers
4. Click on Copy URI button

👍 Expected behavior

It should show some pop up that the link has been copied

👎 Actual Behavior

Doesn't Show anything and it feels like copy button is not working.

🎲 Appwrite version

Version 1.4.x

💻 Operating system

Linux

🧱 Your Environment

No response

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

Go to appwrite web interface, for example :
https://appwrite.my-domain.com/console/

Then navigate between the different collections and attributes tabs, etc.

👍 Expected behavior

Smooth, Google Chrome-like navigation.

👎 Actual Behavior

Very long loading times, datas seems to be reloaded each time instead of using the browser's cache

🎲 Appwrite version

Version 1.3.x

💻 Operating system

MacOS

🧱 Your Environment

Appwrite v1.3.8 Deploy with CapRover
Safari : Version 16.5.2 (18615.2.9.11.10)
MacOS : 13.4.1 (c) (22F770820d)
Server : VPS on OVH cloud with 4 vCores and 4Go ram.

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

🔖 Feature description

Similar to Postman,
Please add a auto-completion support for adding common/generic headers on the dashboard.

Relevant UI -

🎤 Pitch

Current used headers & body are saved for repeated usage, aware of that but this would enhance the UX incase of appwrite restart, session delete and re-login.

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct

👟 Reproduction steps

1. open the appwrite dashboard and navigate to the appropriate collection and document.
2. the document contains an array field with identical values for each element of the array (i.e., ["test", "test", "test"]).
3. attempt to delete one or more elements from this array field.
   Notice that the "Update" button does not become enabled, preventing the changes from being saved.

👍 Expected behavior

The "Update" button should become enabled as soon as any changes are detected in the document, allowing me to save my changes and successfully delete elements from the array.

👎 Actual Behavior

The "Update" button remains disabled and i am unable to save my changes. t


his seems to occur when all elements in the array are identical.

🎲 Appwrite version

Version 0.10.x

💻 Operating system

Windows

🧱 Your Environment

no

👀 Have you spent some time to check if this issue has been raised before?

• I checked and didn't find similar issue

🏢 Have you read the Code of Conduct?

• I have read the Code of Conduct