Monitor your iGrill (mini, v2 or v3) or Pulse 2000 (with a Raspberry Pi 1/2/3) - and forward it to a mqtt-server

• An iGrill Device (and at least one probe) - iGrill mini, iGrill 2 or iGrill 3 or a Pulse2000
• A bluetooth enabled computer - preferable a raspberry pi
• A mqtt server as message receiver

1. clone this repo
2. install required modules using pip (see requirements.txt)
3. Create a dir for your config file(s) (E.g. ./config)
4. Add at least one device config (see ./exampleconfig/device.yaml) - You need the MAC address of your device, you can find it with hcitool lescan
5. start application ./monitor.py -c <path_to_config_dir (or add -l debug)
6. enjoy

Modify examplescripts/igrill.service to mach your setup and copy it to an appropriate place. E.g: /lib/systemd/system/igrill.service

Run systemctl daemon-reload && systemctl enable igrill && systemctl start igrill

Next time you reboot, the iGrill service will connect and reconnect if something goes wrong...

1. Clone this repo
2. Install docker on your system.
3. Create a dir for your config file(s) (E.g. ./config)
4. Add at least one device config (see ./exampleconfig/device.yaml) - You need the MAC address of your device, you can find it with hcitool lescan
5. Build Docker image: docker build . -t igrill
6. Run docker image, mounting the config folder: docker run --network host --name igrill -v <path_to_config_dir>:/usr/src/igrill/config igrill
7. Profit!

If your device is stuck on "Authenticating" the following has been reported to work:

1. within the file /etc/bluetooth/main.conf under [Policy] check the existence of AutoEnable=true
2. Comment out below line in /lib/udev/rules.d/90-pi-bluetooth.rules by prefixing "#" the line ACTION=="add", SUBSYSTEM=="bluetooth", KERNEL=="hci[0-9]*", RUN+="/bin/hciconfig %k up"