This enclosure is designed to be sleek and minimalistic. It is designed to be 3D printed. This case does not provide any camera or display port access. But GPIO are easily accessibles.

This enclosure support following boards:

• Raspberry PI 4B

Two versions of the upper part are available. One with GPIO access and one without. Ideal for a clean look or server applications like VPN, DNS...

• RPI_4b_case_bottom.STL Bottom part of the enclosure common to all
• RPI_4b_case_top.STL Orginal top part of the enclosure with GPIO access
• RPI_4b_case_top_no_gpio.STL Top part of the enclosure without GPIO access
• gpio_cover.STL Cover for GPIO. Best of both worlds, clean look and easy access to GPIO

This enclosure is designed to be used with passive cooling solution. 35x35x12mm heatsink is recommended.

A 1mm copper plate between the CPU and the heatsink is needed to allow space for surrounding components.

No need for fan event with intense CPU usage.

Clearance is 0.2mm for all parts to facilitate assembly. No support is needed.

4x M3x24mm flat-head screws and 4x M3 nuts are needed to assemble the case.

1mm hole above jack connector is designed to fit a 6x6mm push button. This button can be used to wake the Raspberry PI.

• Raspberry PI 3B+ Case version is available here:

  https://github.com/AntoninPvr/RPI_3Bplus_passive_enclosure

   

• Raspberry PI 5 Case version is available here:

  https://github.com/AntoninPvr/RPI5_Case