andrewdjackson / mems-scan Goto Github PK
View Code? Open in Web Editor NEWThis project forked from haro78/mems-scan
Display/diagnostics utility for Rover MEMS 1.6 ECU
License: GNU General Public License v3.0
This project forked from haro78/mems-scan
Display/diagnostics utility for Rover MEMS 1.6 ECU
License: GNU General Public License v3.0
---------- MEMSScan ---------- MEMSScan is based on both MEMSGauge and MEMSrosco MEMSGauge: http://github.com/colinbourassa/memsgauge/releases/latest MEMSrosco: https://github.com/LeopoldG MEMSScan: https://github.com/haro78/MEMS-Scan Discussion group: https://groups.google.com/forum/#!forum/mems-diagnostics MEMSScan is a graphical display and diagnostic tool that reads runtime data from the ECU in the Rover Modular Engine Management System (MEMS). Currently, only MEMS 1.6 is supported. MEMSScan depends on librosco, a library file to communicate with MEMS. Note: MEMSrosco and MEMSScan both use a specific modified version of librosco! Each of these two projects has its own GitHub repository: https://github.com/colinbourassa/memsgauge https://github.com/colinbourassa/librosco ------- License ------- MEMSScan is licensed under the GPL v3. See the file "LICENSE" for details. ---------- Disclaimer ---------- While this software has been shown to be reliable and is provided in good faith, it is provided with ABSOLUTELY NO WARRANTY. ---------------------- Installing and running ---------------------- If you're running Windows, the simplest way to get started is to download the Win32 binary archive. Most people will probably want to do this. The archive contains the MEMSScan executable, Qt libraries, and librosco library, all of which are required to run. If you're running Linux, you can get a Debian package (.DEB) for your system's architecture. It's also possible to build MEMSScan from the code yourself. This can be done with Linux or Windows. In either case, you'll need CMake (version 2.8.11 or newer) as well as version 5.x of the Qt SDK. ------------------ Usage and features ------------------ For MEMSScan to do anything useful, the computer on which it's running must be connected to the serial port in the MEMS wiring harness. This requires building a custom cable using one of FTDI's USB-to-RS232 converters. You can find the details of this on either of these two pages: http://alum.wpi.edu/~colinb/mems_interface.html https://github.com/colinbourassa/librosco/blob/wiki/HardwareInterface.md When the USB FTDI device is connected to the PC, its driver will present it as a COM port if using Windows, or a /dev node if using Linux. Enter the name of the device (such as "COM3") in the "Serial device name" field of the "Edit settings" dialog, under the "Options" menu. (The software will attempt to populate the list of serial devices automatically, so that you can simply select it from the drop-down box.) Once the device name is set and the MEMS ECU is on, use the "Connect" button in the upper left of the main window to open the serial port and begin reading data. The "Communications" lights in the upper right will show the status: green if everything is working and MEMS is responding to read requests, or red if there's a problem. To access the online help about the data displayed by MEMSGauge, open the "Help" menu and select "Contents..." --- FAQ --- Q: Is this an alternative to OBD-II code readers or OBD-II diagnostic software? A: No. The MEMS 1.6 system doesn't conform to the OBD-II standard. This software uses a library specifically to communicate with MEMS. Q: Can this software be used to modify the code or data in the ECU (such as the fuel maps)? A: Yes, you can make adjustment for fuel trim, hot idle/idle delay, idle speed and ignition advance. Note that if there is a valid O2 sensor signal, the fuel trim and hot idle/idle delay will be automatically adjusted by the ECU, so adjustments are just temporary untill MEMS has relearnt its own "optimal" setting. WARNING: FUEL TRIM AND IGNITION ADVANCE ADJUSTMENTS CAN CAUSE SIGNIFICANT ENGINE DAMAGE, ANY ADJUSTMENTS ARE ON YOUR OWN RISK! ------------------------------------------- Notes on building from source under Windows ------------------------------------------- If building from source in a Windows environment, note that the default installation of Qt includes a dependency on the ICU internationalization libraries. The Win32 build of MEMSGauge that I provide was linked against a customized build of Qt and does not have these dependencies. If you'd like to build Qt in a similar way, configure the Qt source tree with this command: configure.bat -release -opensource -no-icu -no-opengl -nomake examples -nomake tests
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.