Set .relay=1 at a device. nRF Mesh Android app acts as provisioner, it shows "Disabled". How to enable relay feature?

at atcmd_bt.c , if CONFIG==1 cant find gap_customer.h file

Hello,

I have purchased the AMEBA Z2 AWS IOT EXPRESSLINK DEV development board.

Additionally, I’ve set up the Ubuntu build environment and built the sample source code. After building, I downloaded the generated flash_ls.bin file using the AmebaZ2_PGTool. https://github.com/ambiot/ambz2_sdk/blob/amazon/readme_for_support_Amazon_v202012-LTS_v02.txt

After completing the download, I encounter the following error log during boot:

== Rtl8710c IoT Platform ==
Chip VID: 5, Ver: 3
ROM Version: v3.0
[BOOT Err]Parttiton Table Header Verification Err!
StartUp@0x0: Invalid RAM Img Signature!

I would appreciate it if you could provide a guide to resolve this situation.

Thank you for your assistance.
Best regards.

Hello,

We are currently looking to start developing a WiFi module using the amebaz2 development board.

Is it possible to build amazon-freertos for the amebaz2 target on Ubuntu?
(amazon-freertos-202007/vendors/realtek/boards/amebaZ2)

I’ve searched for some information and found that in the past, it was only possible in the IAR Embedded Workbench environment.

As of 2023, are there any methods available to build it in the Ubuntu environment?

Thank you for your advice.

Hello!!!
If building after setting "CONFIG_EXAMPLE_UART_ATCMD 1", "undefined reference" happens as the following.
Please check this.

Many devices boot up with default app/net key etc. NOT need phone app or AT command to config. Example mesh app: component/common/bluetooth/realtek/sdk/example/bt_mesh_device_rtk_demo/

download tools for Linux？

Many undefined reference to `mDNSResponderDeinit'....;
See "Realtek mDNS User Guide" to need change icf file, but application_is.icf is different with the doc.
How can I build with makefile without IAR IDE？

Hello,

I attempted to build following the guide as shown here:
f83d629

GCC

1. git clone -b amazon https://github.com/ambiot/ambz2_sdk.git
2. git submodule update --init --recursive --depth 1
3. modified lib_amazon/freertos_LTS/vendors/realtek/boards/amebaZ2/aws_demos/config_files/aws_demo_config.h
4. cd project/realtek_amebaz2_v0_example/GCC-RELEASE/
5. make amazon
6. make is

However, when I try the command "git submodule update --init --recursive --depth 1," I encounter the following error:

Submodule 'component/os/freertos/freertos_v10.4.3' (https://github.com/FreeRTOS/FreeRTOS-Kernel.git) registered for path 'component/os/freertos/freertos_v10.4.3'
Submodule 'lib_amazon/freertos_LTS' (https://github.com/ambiot/amazon-freertos) registered for path 'lib_amazon/freertos_LTS'
Cloning into 'component/os/freertos/freertos_v10.4.3'...
remote: Enumerating objects: 792, done.
remote: Counting objects: 100% (792/792), done.
remote: Compressing objects: 100% (521/521), done.
remote: Total 792 (delta 329), reused 510 (delta 230), pack-reused 0
Receiving objects: 100% (792/792), 1.36 MiB | 0 bytes/s, done.
Resolving deltas: 100% (329/329), done.
Checking connectivity... done.
fatal: reference is not a tree: 1e0843929477c8f2e2679b70d18341ee312a5fce
Cloning into 'lib_amazon/freertos_LTS'...
remote: Enumerating objects: 5285, done.
remote: Counting objects: 100% (5285/5285), done.
remote: Compressing objects: 100% (3969/3969), done.
remote: Total 5285 (delta 1383), reused 4008 (delta 1044), pack-reused 0
Receiving objects: 100% (5285/5285), 83.81 MiB | 19.44 MiB/s, done.
Resolving deltas: 100% (1383/1383), done.
Checking connectivity... done.
fatal: reference is not a tree: ad1ea0a1e123c35e79008d43d3af50bb113d24ce
Unable to checkout '1e0843929477c8f2e2679b70d18341ee312a5fce' in submodule path 'component/os/freertos/freertos_v10.4.3'
Unable to checkout 'ad1ea0a1e123c35e79008d43d3af50bb113d24ce' in submodule path 'lib_amazon/freertos_LTS'

Do you have any suggestions for resolving this error?

Your advice would be greatly appreciated.

Thank you.