amazonparrot / aorus_waterforce_x240_kernel_module Goto Github PK

Hi, I hope this message find you well...

1 Thank you for your work!!!

Now with this, I can see the FAN SPEED, but I'm hoping you could help me change the FAN RPM.
At this point, I open a Virtual Windows and pass-through the 'Bus 001 Device 007: ID 1044:7a4d Chu Yuen Enterprise Co., Ltd Castor' to Windows, and then with AORUS ENGINE or GCC, I can change the FAN SPEED and, if needed, shut down the RGB. But if I could do it in Linux, it would be perfect...

doesn't work with:
echo "1000" > /sys/class/hwmon/hwmon8/fan1_target
echo "1000" | sudo tee /sys/class/hwmon/hwmon8/fan1_target
echo "1000" | sudo tee /sys/class/hwmon/hwmon8/fan1_input

I've tried OpenRGB liquictl and nothing even with:
sudo modprobe i2c-dev
sudo modprobe i2c-i801
sudo i2cdetect -l
sudo sensors-detect
fancontrol
sudo pwmconfig

Hello, first of all, thank you very much for your code.

Unfortunately, it didn't work right away...

The line 153 with: sprintf(path, "/sys/class/thermal/thermal_zone%d/temp", priv->cputhermalzoneid); does not match my CPU and system; I am using Proxmox Debian and an AMD Threadripper. I changed line 153 to the path where my system actually shows the value that your code needs. However, I have the problem that your code posts a lot of errors in my console. I have deactivated it in your code, but I would like to know why this is happening and whether it is a serious issue?

Found you through this thread liquidctl/liquidctl#167
Would it be possible to add support for the Waterforce 240 (Non X)?

Bus 003 Device 002: ID 1044:7a51 Chu Yuen Enterprise Co., Ltd GIGABYTE CPU Cooler
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1044 Chu Yuen Enterprise Co., Ltd
idProduct 0x7a51
bcdDevice 1.00
iManufacturer 1 ROCCAT
iProduct 2 GIGABYTE CPU Cooler
iSerial 3 000000000000
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0062
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 24
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 34
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Warning: Descriptor too short
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 2
bDescriptorType 34 Report
wDescriptorLength 47
bDescriptorType 0 (null)
wDescriptorLength 0
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 4
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0000
(Bus Powered)