conda install mysql-connector-python
Obtains the altitude in meters (with respect to the LIDAR) of the Mixing Layer and the Residual Layer.
Output: Time, ID, ScanID, LID, Azimuth, Elevation, Residual Layer Altitude (m), Mixing Layer Altitude (m)
Example of use:
call lidar.get_boundary_layer_altitude('2017-04-26 12:00:00','2017-04-29 13:00:00')
Obtains the Radial Wind Speed (RWS) the Deviation (TODO) (DRWS) and the Carrier to Noise Ratio (CNR).
call lidar.get_radial_wind_data('2017-04-26 12:00:00','2017-04-29 13:00:00')
Obtains the X,Y,Z components of the wind. It also has the Carrier to Noise Ratio (CNR) and Confidence Index in percentage.
call lidar.get_reconstruction_wind_data('2017-04-26 12:00:00','2017-04-29 13:00:00')
TODO It returns a column with name 'Attenuated Absolute Beta' not sure what it is.
call lidar.get_radial_absolute_beta('2017-04-26 12:00:00','2017-04-26 13:00:00')
TODO It returns a column with name 'Attenuated Relative Beta' not sure what it is.
call lidar.get_radial_beta('2017-04-26 12:00:00','2017-04-26 13:00:00')
Obtains Information about environmental data inside and outside the LIDAR every half an hour. For example: lat, lon, internal temperature, external temperature, external pressure, pith, roll, disk occupation, etc.
call lidar.get_environmental_data('2017-04-26 12:00:00','2017-04-26 13:00:00')
Azimuth: Rotation in the horizontal plane (from -180 to 180). Elevation: Rotation in the vertical plane (from 0 to 90).
Mixing Layer: The atmospheric mixed layer is defined as a layer of (approximately) constant potential temperature, or a layer in which the temperature falls at a rate of approximately 10 C/km, provided it is free of clouds
Residual Layer: