This is a simple, display-only (for now) port of OxidGB to the Raspberry Pi Pico.

Note that this by default overclocks your device - you have been warned!

You will need:

• elf2uf2, part of the Raspberry Pi Pico SDK (if you have the SDK available, you already have this!).
  • Note that the Pico SDK is not required for this - you only need elf2uf2, so you don't need the main ARM toolchain/etc, just this binary.
• A nightly Rust compiler with the thumbv6m-none-eabi target installed. For example:

rustup default nightly
rustup target add thumbv6m-none-eabi

First, take your ROM of choice and put it in the root of the directory.

In main.rs, change your settings as required (including overclocking values).

In your prompt of choice:

cargo build --target thumbv6m-none-eabi --release
elf2uf2 -v target/thumbv6m-none-eabi/release/oxidgb-pico output.uf2

Flash output.uf2 to your device as normal, and cross your fingers!

Oxidgb is licensed under the MIT license. This can be found here.