alexiii / tcc-g15 Goto Github PK

The Autorun feature proved to be difficult to implement in windows. The main issue here is to run the program with admin privileges. No doubt the admin-silent-autorun was abused in the past by various malwares, so Microsoft made it difficult to automatically run your app with admin privileges without prompting the user.

I have tried to add the program to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run which solved the autorun part, but it grands no admin rights.

Adding the program to HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\Layers with RUNASADMIN value blocks the program start completely (probably, due to the security reasons)...

If anyone has experience on the issue, your input would be very appreciated.

After installing this program on g15 5520, it displays 5515. It seems that there is no software that supports 5520. Can we add support for g15 5520?

Hello, thank you for developing this tool, I am currently got a problem with my G15 5520 where the tool automatically turns on G mode as soon as I switch on the laptop.
As well as not reaching the set temperature it also inexplicably turns on G mode. I wonder if there is a solution for this.

Hi this isn't an issue but more of a question, I was wondering if when enabling g mode with this program, is it exactly the same as the AWCC G mode where the GPU will boost up to its maximum wattage, also do any of the other thermal modes do anything? I'm refering to your findings here: https://github.com/AlexIII/tcc-g15/blob/master/WMI-AWCC-doc.md

I like this software very much and thank the author for his dedication. I hope you can update this software in your spare time. Can I publicize this software on Bilibili? This will bring you more stars.

将程序页面最小化之后，在托盘的小图标开关开机自启动会让程序关闭

Because most of the time, my GPU run at 30 degree, constantly. So I decide to check in Task Manager and HWMonitor.

Compare to Task Manager:

Compare to HWMonitor:

IDK but when HWMonitor started, the TCC's GPU thermal instantly jump from 30 degree to 43 degree, matched to HWMonitor's one.

Bonus: Sometimes it jump back to accurate thermal, but comeback in around 30s ~ 1m (not in using HWMonitor-case).

When do you plan to develop one for linux

After installation, I encountered two errors,and couldn't use tcc.
pywintypes.com_error: (-2147352567, '发生意外。', (0, 'SWbemObjectEx', '常规故障 ', None, 0, -2147217407), None)
wmi.x_wmi: <x_wmi: Unexpected COM Error (-2147352567, '发生意外。', (0, 'SWbemObjectEx', '常规故障 ', None, 0, -2147217407), None)>

Just stuck on 2 and 92 degrees (both 1.0 and 1.4 vrsions)

Sir，Can you add an F9 button to manually activate the G mode function? Just like awcc. I think this feature is necessary for some people.
Thank you!

What I want to know is how to switch its language, I see that there are many files "qtbase_zh_CN.qm" in the folder and I want to switch to Chinese

Have you ever considered launching a Linux version of this software Please?

Please upvote this comment with a👍 if you're interested in this feature.
-AlexIII

The app cannot correctly read the temperature of the stand-alone game graphics card on the G15 5510. At any time, the GPU temperature displayed on the application interface will not exceed 35 ° C

Hi，
As you know, the option automatically enable G-mode when GPU/CPU temperature reaches critical.
However,during playing many games (FF14, FF15, DevilMayCry5, etc.) ,every time the moment when the G mode is triggered, the game is always accompanied by a short obvious lag and the sound of stuck.I've tried some methods but didn't improve the situation, and it currently only seems to manually open G-mode while playing games can avoid the stuck of mode switching.
The AWCC is uninstalled very clean, and there are no other performance problems during the use of the computer(5515) .
And I found something interesting that only if the G-mode is triggered will the 3060 graphics card break through the 115W power limit to 120W+，so the contradiction between temperature, fan speed, and graphics card power is a better laugh...

will it support g15 5520?

能否限制只能运行一个 😉

Keyboard light control would be a really good addition to stop using AWCC altogether.

Do you have any insights or tips you could give on how you reverse engineered the constants and methods from AWCC software? I would happily research this in my spare time

The windows system boot or reboot causes the settings for threshold GPU Temp and threshold CPU Temp to default to 30 and 30. Is it necessary to manually re-edit every time, or is it possible to save personal settings?

Hello,

I've tried to launch your program on my Dell G15 5511, but it returns this error. What I can do?

Thanks in advance

Traceback (most recent call last):
File "tcc-g15.py", line 5, in
File "", line 1027, in _find_and_load
File "", line 1006, in _find_and_load_unlocked
File "", line 688, in _load_unlocked
File "PyInstaller\loader\pyimod03_importers.py", line 476, in exec_module
File "GUI\AppGUI.py", line 5, in
File "", line 1027, in _find_and_load
File "", line 1006, in _find_and_load_unlocked
File "", line 688, in _load_unlocked
File "PyInstaller\loader\pyimod03_importers.py", line 476, in exec_module
File "Backend\AWCCThermal.py", line 2, in
File "", line 1027, in _find_and_load
File "", line 1006, in _find_and_load_unlocked
File "", line 688, in _load_unlocked
File "PyInstaller\loader\pyimod03_importers.py", line 476, in exec_module
File "Backend\AWCCWmiWrapper.py", line 3, in
File "", line 1027, in _find_and_load
File "", line 1006, in find_and_load_unlocked
File "", line 688, in load_unlocked
File "PyInstaller\loader\pyimod03_importers.py", line 476, in exec_module
File "wmi.py", line 174, in
File "win32com\client_init.py", line 85, in GetObject
File "win32com\client_init.py", line 102, in Moniker
pywintypes.com_error: (-2147023838, '无法启动服务，原因可能是已被禁用或与其相关联的设备没有启动。', None, None)

My computer caused this result after an automatic update, and reinstalling or restarting my computer will not resolve it