This docker image provides a Minecraft Server that will automatically download the latest stable version at startup. You can also run/upgrade to any specific version or the latest snapshot. See the Versions section below for more information.
To simply use the latest stable version, run
docker run -d -it -p 25565:25565 -e EULA=TRUE itzg/minecraft-server
where, in this case, the standard server port 25565, will be exposed on your host machine.
If you plan on running a server for a longer amount of time it is highly recommended using a management layer such as Docker Compose or Kubernetes to allow for incremental reconfiguration and image upgrades.
Be sure to always include
-e EULA=TRUE
in your commands and container definitions, as Mojang/Microsoft requires EULA acceptance.
By default, the container will download the latest version of the "vanilla" Minecraft: Java Edition server provided by Mojang. The VERSION
and the TYPE
can be configured to create many variations of desired Minecraft server.
Please ensure you have pulled the latest image since all official mitigations are automatically applied by the container startup process.
For Minecraft clients running on consoles, mobile, or native Windows, you'll need to use this image instead:
RCON is enabled by default, so you can exec
into the container to
access the Minecraft server console:
docker exec -i mc rcon-cli
Note: The -i
is required for interactive use of rcon-cli.
To run a simple, one-shot command, such as stopping a Minecraft server, pass the command as arguments to rcon-cli
, such as:
docker exec mc rcon-cli stop
The -i
is not needed in this case.
If rcon is disabled you can send commands by passing them as arguments to the packaged mc-send-to-console
script. For example, a player can be op'ed in the container mc
with:
docker exec mc mc-send-to-console op player
| |
+- container name +- Minecraft commands start here
In order to attach and interact with the Minecraft server, add -it
when starting the container, such as
docker run -d -it -p 25565:25565 --name mc itzg/minecraft-server
With that you can attach and interact at any time using
docker attach mc
and then Control-p Control-q to detach.
For remote access, configure your Docker daemon to use a tcp
socket (such as -H tcp://0.0.0.0:2375
)
and attach from another machine:
docker -H $HOST:2375 attach mc
Unless you're on a home/private LAN, you should enable TLS access.
Everything the container manages is located under the container's /data
path, as shown here:
NOTE: The container path
/data
is pre-declared as a volume, so if you do nothing then it will be allocated as an anonymous volume. As such, it is subject to removal when the container is removed.
In most cases the easiest way to persist and work with the minecraft data files is to use the volume mounting -v
argument to map a directory on your host machine to the container's /data
directory. In the following example, the path /home/user/minecraft-data
must be a directory on your host machine:
-v /home/user/minecraft-data:/data
------------------------- -----
| |
| +-- must always be /data
|
+-- replace with a directory on your host machine
When attached in this way you can stop the server, edit the configuration under your attached directory and start the server again to pick up the new configuration.
With Docker Compose, setting up a host attached directory is even easier since relative paths can be configured. For example, with the following docker-compose.yml
Docker will automatically create/attach the relative directory minecraft-data
to the container.
version: "3"
services:
mc:
image: itzg/minecraft-server
ports:
- 25565:25565
environment:
EULA: "TRUE"
tty: true
stdin_open: true
restart: unless-stopped
volumes:
# attach a directory relative to the directory containing this compose file
- ./minecraft-data:/data
NOTE: if you have SELinux enabled, then you might need to add
:Z
to the end of volume mount specifications, as described here.
If you had used the commands in the first section, without the -v
volume attachment, then an anonymous data volume was created by Docker. You can later bring over that content to a named or host attached volume using the following procedure.
In this example, it is assumed the original container was given a
--name
of "mc", so change the container identifier accordingly.
You can also locate the Docker-managed directory from the
Source
field obtained fromdocker inspect <container id or name> -f "{{json .Mounts}}"
First, stop the existing container:
docker stop mc
Use a temporary container to copy over the anonymous volume's content into a named volume, "mc" in this case:
docker run --rm --volumes-from mc -v mc:/new alpine cp -avT /data /new
Now you can recreate the container with any environment variable changes, etc by attaching the named volume created from the previous step:
docker run -d -it --name mc-new -v mc:/data -p 25565:25565 -e EULA=TRUE -e MEMORY=2G itzg/minecraft-server
The Source
field from the output of this command will show where the anonymous volume is mounted from:
docker inspect -f "{{json .Mounts}}" CONTAINER_NAME_OR_ID
NOTE On Windows with WSL the volumes path is
\\wsl$\docker-desktop-data\data\docker\volumes
To use a different Minecraft version, pass the VERSION
environment variable (case sensitive), which can have the value
- LATEST (the default)
- SNAPSHOT
- or a specific version, such as "1.7.9"
For example, to use the latest snapshot:
docker run -d -e VERSION=SNAPSHOT ...
or a specific version:
docker run -d -e VERSION=1.7.9 ...
When using "LATEST" or "SNAPSHOT" an upgrade can be performed by simply restarting the container.
During the next startup, if a newer version is available from the respective release channel, then
the new server jar file is downloaded and used. NOTE: over time you might see older versions of
the server jar remain in the /data
directory. It is safe to remove those.
For Forge versions less than 1.18, you must use the
java8-multiarch
(or other java8) image tag.
When using the image itzg/minecraft-server
without a tag, the latest
image tag is implied from the table below. To use a different version of Java, please use an alternate tag to run your Minecraft server container.
Tag name | Java version | Linux | JVM Type | Architecture |
---|---|---|---|---|
latest | 17 | Ubuntu | Hotspot | amd64,arm64,armv7 |
java8 | 8 | Alpine | Hotspot | amd64 |
java8-jdk | 8 | Ubuntu | Hotspot+JDK | amd64 |
java8-multiarch | 8 | Ubuntu | Hotspot | amd64,arm64,armv7 |
java8-openj9 | 8 | Debian | OpenJ9 | amd64 |
java8-graalvm-ce | 8 | Oracle | GraalVM CE | amd64 |
java11 | 11 | Ubuntu | Hotspot | amd64,arm64,armv7 |
java11-jdk | 11 | Ubuntu | Hotspot+JDK | amd64,arm64,armv7 |
java11-openj9 | 11 | Debian | OpenJ9 | amd64 |
java17 | 17 | Ubuntu | Hotspot | amd64,arm64,armv7 |
java17-jdk | 17 | Ubuntu | Hotspot+JDK | amd64,arm64,armv7 |
java17-openj9 | 17 | Debian | OpenJ9 | amd64 |
java17-graalvm-ce | 17 | Oracle | GraalVM CE | amd64,arm64 |
java17-alpine | 17 | Alpine | Hotspot | amd64 |
java19 | 19 | Ubuntu | Hotspot | amd64,arm64,armv7 |
For example, to use Java version 8 on any supported architecture:
docker run --name mc itzg/minecraft-server:java8-multiarch
Keep in mind that some versions of Minecraft server, such as Forge before 1.17, can't work on the newest versions of Java. Instead, one of the Java 8 images should be used. Also, FORGE doesn't support openj9 JVM implementation.
Some versions of vanilla Minecraft, such as 1.10, also do not run correctly with Java 17. If in doubt, use
java8-multiarch
for any version less than 1.17.
The following image tags have been deprecated and are no longer receiving updates:
- adopt13
- adopt14
- adopt15
- openj9-nightly
- multiarch-latest
- java16/java16-openj9
Docker image that runs a Minecraft Bedrock server.
Lightweight multiplexer/proxy for Minecraft Java servers. Provided as a stand-alone application and a Docker image.
Docker image that runs a proxy powered by Bungeecord, Velocity, or Waterfall
Docker image that runs as a side-car container to backup world data.
A tool that is bundled with this image to provide CLI access to an RCON endpoint.
A tool that is bundled with this image that provides health checks and metrics reporting, such as a Prometheus exporter or a telegraf data source.
A tool that is bundled with this image to provide complex, re-usable preparation operations.
An image that dockerizes rcon-web-admin.
This image contains mc-monitor and uses its status
command to continually check on the container's. That can be observed from the STATUS
column of docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
b418af073764 mc "/start" 43 seconds ago Up 41 seconds (healthy) 0.0.0.0:25565->25565/tcp, 25575/tcp mc
You can also query the container's health in a script friendly way:
> docker container inspect -f "{{.State.Health.Status}}" mc
healthy
There's actually a wrapper script called mc-health
that takes care of calling mc-monitor status
with the correct arguments. If needing to customize the health checks parameters, such as in a compose file, then use something like the following in the service declaration:
healthcheck:
test: mc-health
start_period: 1m
interval: 5s
retries: 20
Some orchestration systems, such as Portainer, don't allow for disabling the default HEALTHCHECK
declared by this image. In those cases you can approximate the disabling of healthchecks by setting the environment variable DISABLE_HEALTHCHECK
to true
.
- itzg Helm Chart:
- mcsh/server-deployment
The examples directory also provides examples of deploying the itzg/minecraft-server Docker image.
If you're looking for a simple way to deploy this to the Amazon Web Services Cloud, check out the Minecraft Server Deployment (CloudFormation) repository. This repository contains a CloudFormation template that will get you up and running in AWS in a matter of minutes. Optionally it uses Spot Pricing so the server is very cheap, and you can easily turn it off when not in use.
Rather than type the server options below, the port mappings above, etc
every time you want to create new Minecraft server, you can now use
Docker Compose. Start with a
docker-compose.yml
file like the following:
version: "3"
services:
mc:
image: itzg/minecraft-server
ports:
- 25565:25565
environment:
EULA: "TRUE"
tty: true
stdin_open: true
restart: unless-stopped
and in the same directory as that file run
docker-compose up -d
Now, go play...or adjust the environment
section to configure
this server instance.
To troubleshoot the container initialization, such as when server files are pre-downloaded, set the environment variable DEBUG
to true
. The container logs will include much more output, and it is highly recommended including that output when reporting any issues.
To troubleshoot just the command-line used to start the Minecraft server, set the environment variable DEBUG_EXEC
to true
.
To troubleshoot any issues with memory allocation reported by the JVM, set the environment variable DEBUG_MEMORY
to true
.
Enable Forge server mode by adding a -e TYPE=FORGE
to your command-line.
The overall version is specified by VERSION
, as described in the section above and will run the recommended Forge version by default. You can also choose to run a specific Forge version with FORGE_VERSION
, such as -e FORGE_VERSION=14.23.5.2854
.
docker run -d -v /path/on/host:/data \
-e TYPE=FORGE \
-e VERSION=1.12.2 -e FORGE_VERSION=14.23.5.2854 \
-p 25565:25565 -e EULA=TRUE --name mc itzg/minecraft-server
To use a pre-downloaded Forge installer, place it in the attached /data
directory and
specify the name of the installer file with FORGE_INSTALLER
, such as:
docker run -d -v /path/on/host:/data ... \
-e FORGE_INSTALLER=forge-1.11.2-13.20.0.2228-installer.jar ...
To download a Forge installer from a custom location, such as your own file repository, specify
the URL with FORGE_INSTALLER_URL
, such as:
docker run -d -v /path/on/host:/data ... \
-e FORGE_INSTALLER_URL=http://HOST/forge-1.11.2-13.20.0.2228-installer.jar ...
In both of the cases above, there is no need for the VERSION
or FORGEVERSION
variables.
If an error occurred while installing Forge, it might be possible to resolve by temporarily setting
FORGE_FORCE_REINSTALL
to "true". Be sure to remove that variable after successfully starting the server.
Enable Fabric server mode by adding a -e TYPE=FABRIC
to your command-line.
docker run -d -v /path/on/host:/data \
-e TYPE=FABRIC \
-p 25565:25565 -e EULA=TRUE --name mc itzg/minecraft-server
By default, the container will install the latest fabric server launcher, using the latest fabric-loader against the minecraft version you have defined with VERSION
(defaulting to the latest vanilla release of the game).
A specific loader or launcher version other than the latest can be requested using FABRIC_LOADER_VERSION
and FABRIC_LAUNCHER_VERSION
respectively, such as:
docker run -d -v /path/on/host:/data ... \
-e TYPE=FABRIC \
-e FABRIC_LAUNCHER_VERSION=0.10.2 \
-e FABRIC_LOADER_VERSION=0.13.1
If you wish to use an alternative launcher you can:
- Provide the path to a custom launcher jar available to the container with
FABRIC_LAUNCHER
, relative to/data
(such as-e FABRIC_LAUNCHER=fabric-server-custom.jar
)- Provide the URL to a custom launcher jar with
FABRIC_LAUNCHER_URL
(such as-e FABRIC_LAUNCHER_URL=http://HOST/fabric-server-custom.jar
)
See the Working with mods and plugins section to set up Fabric mods and configuration.
Enable Quilt server mode by adding a -e TYPE=QUILT
to your command-line.
docker run -d -v /path/on/host:/data \
-e TYPE=QUILT \
-p 25565:25565 -e EULA=TRUE --name mc itzg/minecraft-server
By default, the container will install the latest quilt server launcher, using the latest quilt-installer against the minecraft version you have defined with VERSION
(defaulting to the latest vanilla release of the game).
A specific loader or installer version other than the latest can be requested using QUILT_LOADER_VERSION
and QUILT_INSTALLER_VERSION
respectively, such as:
docker run -d -v /path/on/host:/data ... \
-e TYPE=QUILT \
-e QUILT_LOADER_VERSION=0.16.0 \
-e QUILT_INSTALLER_VERSION=0.4.1
If you wish to use an alternative launcher you can:
- Provide the path to a custom launcher jar available to the container with
QUILT_LAUNCHER
, relative to/data
(such as-e QUILT_LAUNCHER=quilt-server-custom.jar
)- Provide the URL to a custom launcher jar with
QUILT_LAUNCHER_URL
(such as-e QUILT_LAUNCHER_URL=http://HOST/quilt-server-custom.jar
)
See the Working with mods and plugins section to set up Quilt mods and configuration.
Enable Bukkit/Spigot server mode by adding a -e TYPE=BUKKIT
or -e TYPE=SPIGOT
to your command-line.
docker run -d -v /path/on/host:/data \
-e TYPE=SPIGOT \
-p 25565:25565 -e EULA=TRUE --name mc itzg/minecraft-server
If the downloaded server jar is corrupted, set FORCE_REDOWNLOAD
to "true" to force a re-download during next container startup. After successfully re-downloading, you should remove that or set to "false".
If you are hosting your own copy of Bukkit/Spigot you can override the download URLs with:
- -e BUKKIT_DOWNLOAD_URL=
- -e SPIGOT_DOWNLOAD_URL=
You can build spigot from source by adding -e BUILD_FROM_SOURCE=true
Plugins can either be managed within the plugins
subdirectory of the data directory or you can also attach a /plugins
volume. If you add plugins while the container is running, you'll need to restart it to pick those up.
You can also auto-download plugins using SPIGET_RESOURCES
.
NOTE some of the
VERSION
values are not as intuitive as you would think, so make sure to click into the version entry to find the exact version needed for the download. For example, "1.8" is not sufficient since their download naming expects1.8-R0.1-SNAPSHOT-latest
exactly.
Enable Paper server mode by adding a -e TYPE=PAPER
to your command-line.
By default, the container will run the latest build of Paper server but you can also choose to run a specific build with -e PAPERBUILD=205
.
docker run -d -v /path/on/host:/data \
-e TYPE=PAPER \
-p 25565:25565 -e EULA=TRUE --name mc itzg/minecraft-server
If you are hosting your own copy of Paper you can override the download URL with PAPER_DOWNLOAD_URL=<url>
.
If you have attached a host directory to the /data
volume, then you can install plugins via the plugins
subdirectory. You can also attach a /plugins
volume. If you add plugins while the container is running, you'll need to restart it to pick those up.
You can also auto-download plugins using SPIGET_RESOURCES
.
A Pufferfish server, which is "a highly optimized Paper fork designed for large servers requiring both maximum performance, stability, and "enterprise" features."
-e TYPE=PUFFERFISH
NOTE: The
VERSION
variable is used to select branch latest, 1.18, or 1.17. Use PUFFERFISH_BUILD to really select the SERVER VERSION number.
Extra variables:
PUFFERFISH_BUILD=lastSuccessfulBuild
: set a specific Pufferfish build to use. Example: selecting build 47 => 1.18.1, or build 50 => 1.18.2 etcFORCE_REDOWNLOAD=false
: set to true to force the located server jar to be re-downloadedUSE_FLARE_FLAGS=false
: set to true to add appropriate flags for the built-in Flare profiler
A Purpur server, which is "a drop-in replacement for Paper servers designed for configurability and new, fun, exciting gameplay features."
-e TYPE=PURPUR
NOTE: the
VERSION
variable is used to lookup a build of Purpur to download
Extra variables:
PURPUR_BUILD=LATEST
: set a specific Purpur build to useFORCE_REDOWNLOAD=false
: set to true to force the located server jar to be re-downloadedUSE_FLARE_FLAGS=false
: set to true to add appropriate flags for the built-in Flare profilerPURPUR_DOWNLOAD_URL=<url>
: set URL to download Purpur from custom URL.
A Magma server, which is a combination of Forge and PaperMC, can be used with
-e TYPE=MAGMA
NOTE there are limited base versions supported, so you will also need to set
VERSION
, such as "1.12.2", "1.16.5", etc.
A Mohist server can be used with
-e TYPE=MOHIST
NOTE there are limited base versions supported, so you will also need to set
VERSION
, such as "1.12.2"
By default the latest build will be used; however, a specific build number can be selected by setting MOHIST_BUILD
, such as
-e VERSION=1.16.5 -e MOHIST_BUILD=374
A Catserver type server can be used with
-e TYPE=CATSERVER
NOTE Catserver only provides a single release stream, so
VERSION
is ignored
A Loliserver type server can be used with
-e TYPE=LOLISERVER
NOTE Loliserver only provides a single release stream, so
VERSION
is ignored
Disclaimer The retrieval of the serverjar is not bulletproof. It can and probably will change in the future.
Canyon is a fork of CraftBukkit for Minecraft Beta 1.7.3. It includes multiple enhancements whilst also retaining compatibility with old Bukkit plugins and mods as much as possible.
-e VERSION=b1.7.3 -e TYPE=CANYON
NOTE only
VERSION=b1.7.3
is supported. Since that version pre-dates the health check mechanism used by this image, that will need to be disabled by settingDISABLE_HEALTHCHECK=true
.
By default, the latest build will be used; however, a specific build number can be selected by setting CANYON_BUILD
, such as
-e CANYON_BUILD=11
Enable SpongeVanilla server mode by adding a -e TYPE=SPONGEVANILLA
to your command-line.
By default the container will run the latest STABLE
version.
If you want to run a specific version, you can add -e SPONGEVERSION=1.11.2-6.1.0-BETA-19
to your command-line.
Beware that current Sponge STABLE
versions for Minecraft 1.12 require using the Java 8 tag:
docker run -d -v /path/on/host:/data -e TYPE=SPONGEVANILLA \
-p 25565:25565 -e EULA=TRUE --name mc itzg/minecraft-server:java8-multiarch
You can also choose to use the EXPERIMENTAL
branch.
Just change it with SPONGEBRANCH
, such as:
$ docker run -d -v /path/on/host:/data ... \
-e TYPE=SPONGEVANILLA -e SPONGEBRANCH=EXPERIMENTAL ...
A Limbo server can be run by setting TYPE
to LIMBO
.
Configuration options with defaults:
-
LIMBO_BUILD
=LATESTThe
VERSION
will be ignored so locate the appropriate value from here to match the version expected by clients. -
FORCE_REDOWNLOAD
=false -
LIMBO_SCHEMA_FILENAME
=default.schem -
LEVEL
="Default;${LIMBO_SCHEMA
NAME}"
NOTE: instead of using format codes in the MOTD, Limbo requires JSON chat content. If a plain string is provided, which is the default, then it gets converted into the required JSON structure.
A Crucible server can be run by setting TYPE
to CRUCIBLE
.
Configuration options with defaults:
CRUCIBLE_RELEASE
=latest
Crucible is only available for 1.7.10, so be sure to set VERSION=1.7.10
.
NOTE requires one of the Ubuntu with Hotspot images listed in the Java versions section.
Feed the Beast application modpacks are supported by using -e TYPE=FTBA
(note the "A" at the end of the type). This server type will automatically take care of downloading and installing the modpack and appropriate version of Forge, so the VERSION
does not need to be specified.
FTB_MODPACK_ID
: required, the numerical ID of the modpack to install. The ID can be located by finding the modpack and locating the ID in this part of the URL:https://www.feed-the-beast.com/modpacks/23-ftb-infinity-evolved-17 ^^
FTB_MODPACK_VERSION_ID
: optional, the numerical ID of the version to install. If not specified, the latest version will be installed. The "Version ID" can be obtained by hovering over a server file entry and grabbing this ID in the URL.
If a specific FTB_MODPACK_VERSION_ID
was not specified, simply restart the container to pick up the newest modpack version. If using a specific version ID, recreate the container with the new version ID.
The following example runs the latest version of FTB Presents Direwolf20 1.12:
docker run -d --name mc-ftb -e EULA=TRUE \
-e TYPE=FTBA -e FTB_MODPACK_ID=31 \
-p 25565:25565 \
itzg/minecraft-server:java8-multiarch
Normally you will also add
-v
volume for/data
since the mods and config are installed there along with world data.
To manage a CurseForge modpack automatically with upgrade support, pinned or latest version tracking, set TYPE
to "AUTO_CURSEFORGE". The appropriate mod loader (Forge / Fabric) version will be automatically installed as declared by the modpack. This mode will also take care of cleaning up unused files installed by previous versions of the modpack, but world data is never auto-removed.
NOTES: Be sure to use the appropriate image tag for the Java version compatible with the modpack.
Most modpacks require a good amount of memory, so it best to set
MEMORY
to at least "4G" since the default is only 1 GB.
Use one of the following to specify the modpack to install:
Pass a page URL to the modpack or a specific file with CF_PAGE_URL
such as the modpack page "https://www.curseforge.com/minecraft/modpacks/all-the-mods-8" or a specific file "https://www.curseforge.com/minecraft/modpacks/all-the-mods-8/files/4248390". For example:
-e TYPE=AUTO_CURSEFORGE -e CF_PAGE_URL=https://www.curseforge.com/minecraft/modpacks/all-the-mods-8
Instead of a URL, the modpack slug can be provided as CF_SLUG
. The slug is the short identifier visible in the URL after "/modpacks/", such as
For example:
-e TYPE=AUTO_CURSEFORGE -e CF_SLUG=all-the-mods-8
The latest file will be located and used by default, but if a specific version is desired you can use one of the following options. With any of these options do not select a server file -- they lack the required manifest and defeat the ability to consistently automate startup.
- Use
CF_PAGE_URL
, but include the full URL to a specific file - Set
CF_FILE_ID
to the numerical file ID - Specify a substring to match the desired filename with
CF_FILENAME_MATCHER
The following shows where to get the URL to the specific file and also shows where the file ID is located:
The following examples all refer to version 1.0.7 of ATM8:
-e CF_PAGE_URL=https://www.curseforge.com/minecraft/modpacks/all-the-mods-8/files/4248390
-e CF_SLUG=all-the-mods-8 -e CF_FILE_ID=4248390
-e CF_SLUG=all-the-mods-8 -e CF_FILENAME_MATCHER=1.0.7
Quite often there are mods that need to be excluded, such as ones that did not properly declare as a client mod via the file's game versions. Similarly, there are some mods that are incorrectly tagged as client only. The following describes two options to exclude/include mods:
Global and per modpack exclusions can be declared in a JSON file and referenced with CF_EXCLUDE_INCLUDE_FILE
. By default, the file bundled with the image will be used. The schema of this file is documented here.
Alternatively, they can be excluded by passing a comma or space delimited list of project slugs or IDs via CF_EXCLUDE_MODS
. Similarly, there are some mods that are incorrectly tagged as client only. For those, pass the project slugs or IDs via CF_FORCE_INCLUDE_MODS
. If either of these are set, then CF_EXCLUDE_INCLUDE_FILE
will be disabled.
A mod's project ID can be obtained from the right hand side of the project page:
If needing to iterate on the options above, set CF_FORCE_SYNCHRONIZE
to "true" to ensure the exclude/includes are re-evaluated.
NOTE: these options are provided to empower you to get your server up and running quickly. Please help out by reporting an issue with the respective mod project. Ideally mod developers should use correct registrations for one-sided client mods. Understandably, those code changes may be non-trivial, so mod authors can also add "Client" to the game versions when publishing.
Some modpacks come with world/save data via a worlds file and/or the overrides provided with the modpack. Either approach can be selected to set the LEVEL
to the resulting saves directory by setting CF_SET_LEVEL_FROM
to either:
WORLD_FILE
OVERRIDES
Other configuration available:
CF_PARALLEL_DOWNLOADS
(default is 4): specify how many parallel mod downloads to performCF_OVERRIDES_SKIP_EXISTING
(default is false): if set, files in the overrides that already exist in the data directory are skipped. NOTE world data is always skipped, if present.
Enable this server mode by adding -e TYPE=CURSEFORGE
to your command-line,
but note the following additional steps needed...
You need to specify a modpack to run, using the CF_SERVER_MOD
environment
variable. A CurseForge server modpack is available together with its respective
client modpack at https://www.curseforge.com/minecraft/modpacks .
Now you can add a -e CF_SERVER_MOD=name_of_modpack.zip
to your command-line.
docker run -d -v /path/on/host:/data -e TYPE=CURSEFORGE \
-e CF_SERVER_MOD=SkyFactory_4_Server_4.1.0.zip \
-p 25565:25565 -e EULA=TRUE --name mc itzg/minecraft-server
If you want to keep the pre-download modpacks separate from your data directory,
then you can attach another volume at a path of your choosing and reference that.
The following example uses /modpacks
as the container path as the pre-download area:
docker run -d -v /path/on/host:/data -v /path/to/modpacks:/modpacks \
-e TYPE=CURSEFORGE \
-e CF_SERVER_MOD=/modpacks/SkyFactory_4_Server_4.1.0.zip \
-p 25565:25565 -e EULA=TRUE --name mc itzg/minecraft-server
By default, CurseForge modpacks are expanded into the sub-directory /data/FeedTheBeast
and executed from there. (The default location was chosen for legacy reasons, when Curse and FTB were maintained together.)
The directory can be changed by setting CF_BASE_DIR
, such as -e CF_BASE_DIR=/data
.
Some modpacks have buggy or overly complex start scripts. You can avoid using the bundled start script and use this image's standard server-starting logic by adding -e USE_MODPACK_START_SCRIPT=false
.
If your server's modpack fails to load with an error like this:
unable to launch forgemodloader
then you apply a workaround by adding this to the run invocation:
-e FTB_LEGACYJAVAFIXER=true
packwiz is a CLI tool for maintaining and providing modpack definitions, with support for both CurseForge and Modrinth as sources. See the packwiz tutorial for more information.
To configure server mods using a packwiz modpack, set the PACKWIZ_URL
environment variable to the location of your pack.toml
modpack definition:
docker run -d -v /path/on/host:/data -e TYPE=FABRIC \
-e "PACKWIZ_URL=https://example.com/modpack/pack.toml" \
itzg/minecraft-server
packwiz modpack defitions are processed before other mod definitions (MODPACK
, MODS
, etc.) to allow for additional processing/overrides you may want to perform (in case of mods not available via Modrinth/CurseForge, or you do not maintain the pack).
packwiz is pre-configured to only download server mods. If client-side mods are downloaded and cause issues, check your pack.toml configuration, and make sure any client-only mods are not set to
"both"
, but rather"client"
for the side configuration item.
There are optional volume paths that can be attached to supply content to be copied into the data area:
/plugins
: contents are synchronized into /data/plugins
for Bukkit related server types. Set SYNC_SKIP_NEWER_IN_DESTINATION=false
if you want files from /plugins
to take precedence over newer files in /data/plugins
.
/mods
: contents are synchronized into /data/mods
for Fabric and Forge related server types. The destination can be changed by setting COPY_MODS_DEST
.
/config
: contents are synchronized into /data/config
by default, but can be changed with COPY_CONFIG_DEST
. For example, -v ./config:/config -e COPY_CONFIG_DEST=/data
will allow you to copy over files like bukkit.yml
and so on directly into the server directory. Set SYNC_SKIP_NEWER_IN_DESTINATION=false
if you want files from /config
to take precedence over newer files in /data/config
.
By default, the environment variable processing is performed on synchronized files that match the expected suffixes in REPLACE_ENV_SUFFIXES
(by default "yml,yaml,txt,cfg,conf,properties,hjson,json,tml,toml") and are not excluded by REPLACE_ENV_VARIABLES_EXCLUDES
and REPLACE_ENV_VARIABLES_EXCLUDE_PATHS
. This processing can be disabled by setting REPLACE_ENV_DURING_SYNC
to false
.
If you want old mods/plugins to be removed before the content is brought over from those attach points, then add -e REMOVE_OLD_MODS=TRUE
. You can fine tune the removal process by specifying the REMOVE_OLD_MODS_INCLUDE
and REMOVE_OLD_MODS_EXCLUDE
variables, which are comma separated lists of file glob patterns. If a directory is excluded, then it and all of its contents are excluded. By default, only jars are removed.
You can also specify the REMOVE_OLD_MODS_DEPTH
(default is 16) variable to only delete files up to a certain level.
For example: -e REMOVE_OLD_MODS=TRUE -e REMOVE_OLD_MODS_INCLUDE="*.jar" -e REMOVE_OLD_MODS_DEPTH=1
will remove all old jar files that are directly inside the plugins/
or mods/
directory.
These paths work well if you want to have a common set of modules in a separate location, but still have multiple worlds with different server requirements in either persistent volumes or a downloadable archive.
For more flexibility with mods/plugins preparation, you can declare directories to use in the
MODS
variable
The SPIGET_RESOURCES
variable can be set with a comma-separated list of SpigotMC resource IDs to automatically download SpigotMC resources/plugins using the spiget API. Resources that are zip files will be expanded into the plugins directory and resources that are simply jar files will be moved there.
NOTE: the variable is purposely spelled SPIGET with an "E"
The resource ID can be located from the numerical part of the URL after the shortname and a dot. For example, the ID is 9089 from
https://www.spigotmc.org/resources/essentialsx.9089/
====
For example, the following will auto-download the EssentialsX and Vault plugins:
-e SPIGET_RESOURCES=9089,34315
Modrinth is an open source modding platform with a clean, easy to use website for finding Fabric and Forge mods. At startup, the container will automatically locate and download the newest versions of mod files that correspond to the TYPE
and VERSION
in use. Older file versions downloaded previously will automatically be cleaned up.
- MODRINTH_PROJECTS : comma separated list of project slugs (short name) or IDs. The project ID can be located in the "Technical information" section. The slug is the part of the page URL that follows
/mod/
:Also, specific version/type can be declared using colon symbol and version id/type after the project slug. The version id can be found at 'Metadata' section. Valid version types arehttps://modrinth.com/mod/fabric-api ---------- | +-- project slug
release
,beta
,alpha
. For instance:-e MODRINTH_PROJECTS=fabric-api,fabric-api:PbVeub96,fabric-api:beta
- MODRINTH_DOWNLOAD_OPTIONAL_DEPENDENCIES=true : required dependencies of the project will always be downloaded and optional dependencies can also be downloaded by setting this to
true
- MODRINTH_ALLOWED_VERSION_TYPE=release : the version type is used to determine the newest version to use from each project. The allowed values are
release
,beta
,alpha
.
Like the WORLD
option above, you can specify the URL or path of a "mod pack"
to download and install into mods
for Forge/Fabric or plugins
for Bukkit/Spigot.
To use this option pass the environment variable MODPACK
, such as
docker run -d -e MODPACK=http://www.example.com/mods/modpack.zip ...
NOTE: The referenced URL must be a zip file with one or more jar files at the
top level of the zip archive. Make sure the jars are compatible with the
particular TYPE
of server you are running.
You may also download or copy over individual mods using the MODS
environment variable. MODS
contains a comma-separated list of
-
URL of a jar file
-
container path to a jar file
-
container path to a directory containing jar files
docker run -d -e MODS=https://www.example.com/mods/mod1.jar,/plugins/common,/plugins/special/mod2.jar ...
NOTE: This potentially could lead to unexpected behavior if the Mod receives an update with unexpected behavior.
This is more complicated because you will be pulling/using the latest mod for the release of your game. To get started make sure you have a CursedForge API Key. Then use the environmental parameters in your docker build.
Please be aware of the following when using these options for your mods:
- Mod Release types: Release, Beta, and Alpha.
- Mod dependencies: Required and Optional
- Mod family: Fabric, Forge, and Bukkit.
Parameters to use the ForgeAPI:
MODS_FORGEAPI_KEY
- RequiredMODS_FORGEAPI_FILE
- Required or use MODS_FORGEAPI_PROJECTIDS (Overrides MODS_FORGEAPI_PROJECTIDS)MODS_FORGEAPI_PROJECTIDS
- Required or use MODS_FORGEAPI_FILEMODS_FORGEAPI_RELEASES
- Default is release, Options: [Release|Beta|Alpha]MODS_FORGEAPI_DOWNLOAD_DEPENDENCIES
- Default is False, attempts to download required mods (releaseType Release) defined in Forge.MODS_FORGEAPI_IGNORE_GAMETYPE
- Default is False, Allows for filtering mods on family type: FORGE, FABRIC, and BUKKIT. (Does not filter for Vanilla or custom)REMOVE_OLD_FORGEAPI_MODS
- Default is FalseREMOVE_OLD_DATAPACKS_DEPTH
- Default is 1REMOVE_OLD_DATAPACKS_INCLUDE
- Default is *.jar
Example of expected forge api project ids, releases, and key:
MODS_FORGEAPI_PROJECTIDS: 306612,256717
MODS_FORGEAPI_RELEASES: Release
MODS_FORGEAPI_KEY: $WRX...
Example of expected ForgeAPI file format.
Field Description:
name
is currently unused, but can be used to document each entry.projectId
id is the id found on the CurseForge website for a particular modreleaseType
Type corresponds to forge's R, B, A icon for each file. Default Release, options are (release|beta|alpha).fileName
is used for version pinning if latest file will not work for you.
[
{
"name": "fabric api",
"projectId": "306612",
"releaseType": "release"
},
{
"name": "fabric voice mod",
"projectId": "416089",
"releaseType": "beta"
},
{
"name": "Biomes o plenty",
"projectId": "220318",
"fileName": "BiomesOPlenty-1.18.1-15.0.0.100-universal.jar",
"releaseType": "release"
}
]
To install all the server content (jars, mods, plugins, configs, etc.) from a zip or tgz file, then set GENERIC_PACK
to the container path or URL of the archive file. This can also be used to apply a CurseForge modpack that is missing a server start script and/or Forge installer.
If multiple generic packs need to be applied together, set GENERIC_PACKS
instead, with a comma separated list of archive file paths and/or URLs to files.
To avoid repetition, each entry will be prefixed by the value of GENERIC_PACKS_PREFIX
and suffixed by the value of GENERIC_PACKS_SUFFIX
, both of which are optional. For example, the following variables
GENERIC_PACKS=configs-v9.0.1,mods-v4.3.6
GENERIC_PACKS_PREFIX=https://cdn.example.org/
GENERIC_PACKS_SUFFIX=.zip
would expand to https://cdn.example.org/configs-v9.0.1.zip,https://cdn.example.org/mods-v4.3.6.zip
.
If applying large generic packs, the update can be time-consuming. To skip the update set SKIP_GENERIC_PACK_UPDATE_CHECK
to "true". Conversely, the generic pack(s) can be forced to be applied by setting FORCE_GENERIC_PACK_UPDATE
to "true".
The most time consuming portion of the generic pack update is generating and comparing the SHA1 checksum. To skip the checksum generation, set SKIP_GENERIC_PACK_CHECKSUM
to "true.
As an alternative to MODS
, the variable MODS_FILE
can be set with the path to a text file listing a mod/plugin URL on each line. For example, the following
-e MODS_FILE=/extras/mods.txt
would load from a file mounted into the container at /extras/mods.txt
. That file might look like:
https://edge.forgecdn.net/files/2965/233/Bookshelf-1.15.2-5.6.40.jar
https://edge.forgecdn.net/files/2926/27/ProgressiveBosses-2.1.5-mc1.15.2.jar
# This and next line are ignored
#https://edge.forgecdn.net/files/3248/905/goblintraders-1.3.1-1.15.2.jar
https://edge.forgecdn.net/files/3272/32/jei-1.15.2-6.0.3.16.jar
https://edge.forgecdn.net/files/2871/647/ToastControl-1.15.2-3.0.1.jar
Blank lines and lines that start with a
#
will be ignored
This compose file shows another example of using this feature.
It is recommended to combine this option with
REMOVE_OLD_MODS=TRUE
to ensure the mods/plugins remain consistent with the file's listing.
When the option above is specified (MODPACK
) you can also instruct script to
delete old mods/plugins prior to installing new ones. This behaviour is desirable
in case you want to upgrade mods/plugins from downloaded zip file.
To use this option pass the environment variable REMOVE_OLD_MODS=TRUE
, such as
docker run -d -e REMOVE_OLD_MODS=TRUE -e MODPACK=http://www.example.com/mods/modpack.zip ...
WARNING: All content of the mods
or plugins
directory will be deleted
before unpacking new content from the MODPACK or MODS.
Instead of mounting the /data
volume, you can instead specify the URL of a ZIP or compressed TAR file containing an archived world. It will be searched for a file level.dat
and the containing subdirectory moved to the directory named by $LEVEL
. This means that most of the archived Minecraft worlds downloadable from the Internet will already be in the correct format.
docker run -d -e WORLD=http://www.example.com/worlds/MySave.zip ...
NOTE: This URL must be accessible from inside the container. Therefore, you should use an IP address or a globally resolvable FQDN, or else the name of a linked container.
NOTE: If the archive contains more than one level.dat
, then the one to select can be picked with WORLD_INDEX
, which defaults to 1.
The WORLD
option can also be used to reference a directory, zip file, or compressed tar file that will be used as a source to clone or extract the world directory.
For example, the following would initially clone the world's content from /worlds/basic
. Also notice in the example that you should use a read-only volume attachment to ensure the clone source remains pristine.
docker run ... -v $HOME/worlds:/worlds:ro -e WORLD=/worlds/basic
The following diagram shows how this option can be used in a compose deployment with a relative directory:
The world will only be downloaded or copied if it doesn't exist already. Set FORCE_WORLD_COPY=TRUE
to force overwrite the world on every server start.
To set a custom worlds directory for the Multiverse plugin on a baremetal server, you'd pass the --world-dir
argument after the jar file.
In order to accomplish the same in a containerized server, set the EXTRA_ARGS
environment variable in your command line or docker compose yaml to the same argument string. For example:
docker run -d -e EXTRA_ARGS='--world-dir ./worlds/'
--world-container
, -W
, and --universe
are aliases to --world-dir
and can also be used.
Datapacks can be installed in a similar manner to mods/plugins. There are many environment variables which function in the same way they do for mods:
DATAPACKS
: comma-separated list of zip file URL, zip file in container, or directory in containerDATAPACKS_FILE
: a text file within the container where each line is a zip file URL, zip file in container, or directory in containerREMOVE_OLD_DATAPACKS
: if "true" the datapacks directory is removed of everything matchingREMOVE_OLD_DATAPACKS_INCLUDE
, but excludingREMOVE_OLD_DATAPACKS_EXCLUDE
no deeper thanREMOVE_OLD_DATAPACKS_DEPTH
REMOVE_OLD_DATAPACKS_DEPTH
: default is 16REMOVE_OLD_DATAPACKS_INCLUDE
: default is*.zip
REMOVE_OLD_DATAPACKS_EXCLUDE
: default is empty
Datapacks will be placed in /data/$LEVEL/datapacks
VanillaTweaks datapacks, crafting tweaks, and resource packs can be installed with a share code from the website OR a json file to specify packs to download and install. Datapacks and crafting tweaks will be installed into the current world directory specified by $LEVEL
. As new versions of the packs are retrieved the previous versions will automatically be cleaned up.
The share code is the part following the hash sign, as shown here:
https://vanillatweaks.net/share/#MGr52E
------
|
+- share code MGr52E
Accepted Parameters:
VANILLATWEAKS_FILE
: comma separated list of JSON VanillaTweak pack files accessible within the containerVANILLATWEAKS_SHARECODE
: comma separated list of share codes
Example of expected VanillaTweaks share codes: Note: ResourcePacks, DataPacks, and CraftingTweaks all have separate sharecodes
VANILLATWEAKS_SHARECODE: MGr52E,tF1zL2,LnEDwT
Example of expected VanillaTweaks files:
VANILLATWEAKS_FILE: /config/vt-datapacks.json,/config/vt-craftingtweaks.json,/config/vt-resourcepacks.json
Datapacks Json:
{
"type": "datapacks",
"version": "1.18",
"packs": {
"survival": [
"graves",
"multiplayer sleep"
],
"items": ["armored elytra"]
}
}
Resourcepacks Json:
{
"type": "resourcepacks",
"version": "1.18",
"packs": {
"aesthetic": ["CherryPicking", "BlackNetherBricks", "AlternateBlockDestruction"]
}
}
CraftingTweaks Json:
{
"type": "craftingtweaks",
"version": "1.18",
"packs": {
"quality of life": [
"dropper to dispenser",
"double slabs",
"back to blocks"
]
}
}
By default, the server configuration will be created and set based on the following environment variables, but only the first time the server is started. If the server.properties
file already exists, the values in them will not be changed.
If you prefer to manually manage the server.properties
file, set OVERRIDE_SERVER_PROPERTIES
to "false". Similarly, you can entirely skip the startup script's creation of server.properties
by setting SKIP_SERVER_PROPERTIES
to "true".
NOTE: to clear a server property, set the variable to an empty string, such as
-e RESOURCE_PACK=""
. A variables that maps to a server property that is unset, is ignored and the existingserver.property
is left unchanged.
The message of the day, shown below each server entry in the client UI, can be changed with the MOTD
environment variable, such as
-e MOTD="My Server"
If you leave it off, a default is computed from the server type and version, such as
A Paper Minecraft Server powered by Docker
That way you can easily differentiate between several servers you may have started.
The section symbol (ยง) and other unicode characters are automatically converted to allow formatting codes to be used consistently with all server versions. For example,
-e MOTD="A ยงlยงcMinecraftยงr ยงnserver"
renders
To produce a multi-line MOTD, you will need to double escape the newline such as
-e MOTD="Line one\\nLine two"
The difficulty level (default: easy
) can be set like:
docker run -d -e DIFFICULTY=hard ...
Valid values are: peaceful
, easy
, normal
, and hard
, and an
error message will be output in the logs if it's not one of these
values.
NOTE it is very important to set this with servers exposed to the internet where you want only limited players to join.
To whitelist players for your Minecraft server, you can:
- Provide a list of usernames and/or UUIDs separated by commas via the
WHITELIST
environment variable
docker run -d -e WHITELIST=user1,uuid2 ...
- Provide the url or path to a whitelist file via
WHITELIST_FILE
environment variable
docker run -d -e WHITELIST_FILE=/extra/whitelist.json ...
When either is set, whitelisting of connecting users is enabled . If managing the list manually, ENABLE_WHITELIST
can be set to "true" to set the white-list
property.
If whitelist configuration already exists, WHITELIST_FILE
will not be retrieved and any usernames in WHITELIST
are added to the whitelist configuration. You can enforce regeneration of the whitelist on each server startup by setting OVERRIDE_WHITELIST
to "true". This will delete the whitelist file before processing whitelist configuration.
NOTE: You can provide both
WHITELIST_FILE
andWHITELIST
, which are processed in that order.
NOTE: UUIDs passed via
WHITELIST
need to be the dashed variant, otherwise it not be recognised and instead added as a username.
If running Minecraft 1.7.5 or earlier, these variables will apply to
white-list.txt
, with 1.7.6 implementing support forwhitelist.json
. Make sure yourWHITELIST_FILE
is in the appropriate format.
To enforce the whitelist changes immediately when whitelist commands are used , set ENFORCE_WHITELIST
to "true".
Similar to the whitelist, to add users as operators (aka adminstrators) to your Minecraft server, you can:
- Provide te url or path to an ops file via
OPS_FILE
environment variable
docker run -d -e OPS_FILE=https://config.example.com/extra/ops.json ...
- Provide a list of usernames and/or UUIDs separated by commas via the
OPS
environment variable
docker run -d -e OPS=user1,uuid2 ...
If ops configuration already exists, OPS_FILE
will not be retrieved and any usernames in OPS
are added to the ops configuration. You can enforce regeneration of the ops configuration on each server startup by setting OVERRIDE_OPS
to "true". This will delete the ops file before processing ops configuration.
Similar to whitelists, you can provide both
OPS_FILE
andOPS
, and Minecraft 1.7.5 or earlier will useops.txt
rather thanops.json
.
New to 22W42A, datapacks with feature flags can be controlled before initial world creation by setting these to a comma separated list of packs:
INITIAL_ENABLED_PACKS
such as "update_1_20,bundle"INITIAL_DISABLED_PACKS
A server icon can be configured using the ICON
variable. The image will be automatically
downloaded, scaled, and converted from any other image format:
docker run -d -e ICON=http://..../some/image.png ...
The server icon which has been set doesn't get overridden by default. It can be changed and overridden by setting OVERRIDE_ICON
to TRUE
.
docker run -d -e ICON=http://..../some/other/image.png -e OVERRIDE_ICON=TRUE...
RCON is enabled by default to allow for graceful shut down the server and coordination of save state during backups. RCON can be disabled by setting ENABLE_RCON
to "false".
The default password is "minecraft" but change the password before deploying into production by setting RCON_PASSWORD
.
DO NOT MAP THE RCON PORT EXTERNALLY unless you aware of all the consequences and have set a secure password with RCON_PASSWORD
.
Mapping ports (
-p
command line orports
in compose) outside the container and docker networking needs to be a purposeful choice. Most production Docker deployments do not need any of the Minecraft ports mapped externally from the server itself.
By default, the server listens for RCON on port 25575 within the container. It can be changed with RCON_PORT
but only do this if you have a very good reason. DO NOT change rcon.port
via server.properties
or integrations will break.
Enabling this will enable the gamespy query protocol.
By default the query port will be 25565
(UDP) but can easily be changed with the QUERY_PORT
variable.
docker run -d -e ENABLE_QUERY=true
By default max players is 20, you can increase this with the MAX_PLAYERS
variable.
docker run -d -e MAX_PLAYERS=50
This sets the maximum possible size in blocks, expressed as a radius, that the world border can obtain.
docker run -d -e MAX_WORLD_SIZE=10000
Allows players to travel to the Nether.
docker run -d -e ALLOW_NETHER=true
Allows server to announce when a player gets an achievement.
docker run -d -e ANNOUNCE_PLAYER_ACHIEVEMENTS=true
Enables command blocks
docker run -d -e ENABLE_COMMAND_BLOCK=true
Force players to join in the default game mode.
-
false - Players will join in the gamemode they left in.
-
true - Players will always join in the default gamemode.
docker run -d -e FORCE_GAMEMODE=false
Defines whether structures (such as villages) will be generated.
-
false - Structures will not be generated in new chunks.
-
true - Structures will be generated in new chunks.
docker run -d -e GENERATE_STRUCTURES=true
If set to true, players will be set to spectator mode if they die.
docker run -d -e HARDCORE=false
If set to false, the server will not send data to snoop.minecraft.net server.
docker run -d -e SNOOPER_ENABLED=false
The maximum height in which building is allowed. Terrain may still naturally generate above a low height limit.
docker run -d -e MAX_BUILD_HEIGHT=256
The maximum number of milliseconds a single tick may take before the server watchdog stops the server with the message, A single server tick took 60.00 seconds (should be max 0.05); Considering it to be crashed, server will forcibly shutdown. Once this criteria is met, it calls System.exit(1). Setting this to -1 will disable watchdog entirely
docker run -d -e MAX_TICK_TIME=60000
Determines if animals will be able to spawn.
docker run -d -e SPAWN_ANIMALS=true
Determines if monsters will be spawned.
docker run -d -e SPAWN_MONSTERS=true
Determines if villagers will be spawned.
docker run -d -e SPAWN_NPCS=true
Sets the area that non-ops can not edit (0 to disable)
docker run -d -e SPAWN_PROTECTION=0
Sets the amount of world data the server sends the client, measured in chunks in each direction of the player (radius, not diameter). It determines the server-side viewing distance.
docker run -d -e VIEW_DISTANCE=10
If you want to create the Minecraft level with a specific seed, use SEED
, such as
-e SEED=1785852800490497919
If using a negative value for the seed, make sure to quote the value such as:
-e SEED="-1785852800490497919"
By default, Minecraft servers are configured to run in Survival mode. You can
change the mode using MODE
where you can either provide the standard
numerical values or the
shortcut values:
- creative
- survival
- adventure
- spectator (only for Minecraft 1.8 or later)
For example:
docker run -d -e MODE=creative ...
By default, servers are created with player-vs-player (PVP) mode enabled. You can disable this with the PVP
environment variable set to false
, such as
docker run -d -e PVP=false ...
By default, a standard world is generated with hills, valleys, water, etc. A different level type can
be configured by setting LEVEL_TYPE
to an expected type listed here.
For some of the level types, GENERATOR_SETTINGS
can be used to further customize the world generation as described here.
You can set a link to a custom resource pack and set it's checksum using the RESOURCE_PACK
and RESOURCE_PACK_SHA1
options respectively, the default is blank:
docker run -d -e 'RESOURCE_PACK=http://link.com/to/pack.zip?=1' -e 'RESOURCE_PACK_SHA1=d5db29cd03a2ed055086cef9c31c252b4587d6d0'
You can enforce the resource pack on clients by setting RESOURCE_PACK_ENFORCE
to TRUE
(default: FALSE
).
You can either switch between world saves or run multiple containers with different saves by using the LEVEL
option,
where the default is "world":
docker run -d -e LEVEL=bonus ...
NOTE: if running multiple containers be sure to either specify a different
-v
host directory for eachLEVEL
in use or don't use-v
and the container's filesystem will keep things encapsulated.
INFO Refer to the data directory section for a visual description of where the
$LEVEL
directory is situated.
By default, server checks connecting players against Minecraft's account database. If you want to create an offline server or your server is not connected to the internet, you can disable the server to try connecting to minecraft.net to authenticate players with environment variable ONLINE_MODE
, like this
docker run -d -e ONLINE_MODE=FALSE ...
Allows users to use flight on your server while in Survival mode, if they have a mod that provides flight installed.
-e ALLOW_FLIGHT=TRUE|FALSE
The server name (e.g. for bungeecord) can be set like:
docker run -d -e SERVER_NAME=MyServer ...
WARNING: only change this value if you know what you're doing. It is only needed when using host networking and it is rare that host networking should be used. Use
-p
port mappings instead.
If you must, the server port can be set like:
docker run -d -e SERVER_PORT=25566 ...
however, be sure to change your port mapping accordingly and be prepared for some features to break.
Environment Variable | Server Property |
---|---|
PLAYER_IDLE_TIMEOUT | player-idle-timeout |
BROADCAST_CONSOLE_TO_OPS | broadcast-console-to-ops |
BROADCAST_RCON_TO_OPS | broadcast-rcon-to-ops |
ENABLE_JMX | enable-jmx-monitoring |
SYNC_CHUNK_WRITES | sync-chunk-writes |
ENABLE_STATUS | enable-status |
ENTITY_BROADCAST_RANGE_PERCENTAGE | entity-broadcast-range-percentage |
FUNCTION_PERMISSION_LEVEL | function-permission-level |
NETWORK_COMPRESSION_THRESHOLD | network-compression-threshold |
OP_PERMISSION_LEVEL | op-permission-level |
PREVENT_PROXY_CONNECTIONS | prevent-proxy-connections |
USE_NATIVE_TRANSPORT | use-native-transport |
ENFORCE_WHITELIST | enforce-whitelist |
ENABLE_WHITELIST | white-list and whitelist |
SIMULATION_DISTANCE | simulation-distance |
Sometimes you have mods or plugins that require configuration information that is only available at runtime. For example if you need to configure a plugin to connect to a database, you don't want to include this information in your Git repository or Docker image. Or maybe you have some runtime information like the server name that needs to be set in your config files after the container starts.
For those cases there is the option to replace defined variables inside your configs with environment variables defined at container runtime.
When the environment variable REPLACE_ENV_IN_PLACE
is set to true
(the default), the startup script will go through all files inside the container's /data
path and replace variables that match the container's environment variables. Variables can instead (or in addition to) be replaced in files sync'ed from /plugins
, /mods
, and /config
by setting REPLACE_ENV_DURING_SYNC
to true
(defaults to false
).
Variables that you want to replace need to be declared inside curly brackets and prefixed with a dollar sign, such as ${CFG_YOUR_VARIABLE}
, which is same as many scripting languages.
You can also change REPLACE_ENV_VARIABLE_PREFIX
, which defaults to "CFG_", to limit which environment variables are allowed to be used. For example, with "CFG_" as the prefix, the variable ${CFG_DB_HOST}
would be subsituted, but not ${DB_HOST}
.
If you want to use a file's content for value, such as when using secrets mounted as files, declare the placeholder named like normal in the file and declare an environment variable named the same but with the suffix _FILE
.
For example, a my.cnf
file could contain:
[client]
password = ${CFG_DB_PASSWORD}
...a secret declared in the compose file with:
secrets:
db_password:
external: true
...and finally the environment variable would be named with a _FILE
suffix and point to the mounted secret:
environment:
CFG_DB_PASSWORD_FILE: /run/secrets/db_password
Variables will be replaced in files with the following extensions:
.yml
, .yaml
, .txt
, .cfg
, .conf
, .properties
.
Specific files can be excluded by listing their name (without path) in the variable REPLACE_ENV_VARIABLES_EXCLUDES
.
Paths can be excluded by listing them in the variable REPLACE_ENV_VARIABLES_EXCLUDE_PATHS
. Path
excludes are recursive. Here is an example:
REPLACE_ENV_VARIABLES_EXCLUDE_PATHS="/data/plugins/Essentials/userdata /data/plugins/MyPlugin"
Here is a full example where we want to replace values inside a database.yml
.
---
database:
host: ${CFG_DB_HOST}
name: ${CFG_DB_NAME}
password: ${CFG_DB_PASSWORD}
This is how your docker-compose.yml
file could look like:
version: "3.8"
# Other docker-compose examples in /examples
services:
minecraft:
image: itzg/minecraft-server
ports:
- "25565:25565"
volumes:
- "mc:/data"
environment:
EULA: "TRUE"
ENABLE_RCON: "true"
RCON_PASSWORD: "testing"
RCON_PORT: 28016
# enable env variable replacement
REPLACE_ENV_VARIABLES: "TRUE"
# define an optional prefix for your env variables you want to replace
ENV_VARIABLE_PREFIX: "CFG_"
# and here are the actual variables
CFG_DB_HOST: "http://localhost:3306"
CFG_DB_NAME: "minecraft"
CFG_DB_PASSWORD_FILE: "/run/secrets/db_password"
volumes:
mc:
rcon:
secrets:
db_password:
file: ./db_password
JSON path based patches can be applied to one or more existing files by setting the variable PATCH_DEFINITIONS
to the path of a directory that contains one or more patch definition json files or a patch set json file.
Variable placeholders in the patch values can be restricted by setting REPLACE_ENV_VARIABLE_PREFIX
, which defaults to "CFG_".
The following example shows a patch-set file were various fields in the paper.yaml
configuration file can be modified and added:
{
"patches": [
{
"file": "/data/paper.yml",
"ops": [
{
"$set": {
"path": "$.verbose",
"value": true
}
},
{
"$set": {
"path": "$.settings['velocity-support'].enabled",
"value": "${CFG_VELOCITY_ENABLED}",
"value-type": "bool"
}
},
{
"$put": {
"path": "$.settings",
"key": "my-test-setting",
"value": "testing"
}
}
]
}
]
}
NOTES: Only JSON and Yaml files can be patched at this time. TOML support is planned to be added next. Removal of comments and other cosmetic changes will occur when patched files are processed.
If you would like to run a custom server JAR, set -e TYPE=CUSTOM
and pass the custom server
JAR via CUSTOM_SERVER
. It can either be a URL or a container path to an existing JAR file.
If it is a URL, it will only be downloaded into the /data
directory if it wasn't already. As
such, if you need to upgrade or re-download the JAR, then you will need to stop the container,
remove the file from the container's /data
directory, and start again.
For VANILLA, FORGE, BUKKIT, SPIGOT, PAPER, CURSEFORGE, SPONGEVANILLA server types, set
$FORCE_REDOWNLOAD
to some value (e.g. 'true) to force a re-download of the server file for
the particular server type. by adding a -e FORCE_REDOWNLOAD=true
to your command-line.
For example, with PaperSpigot, it would look something like this:
docker run -d -v /path/on/host:/data \
-e TYPE=PAPER -e FORCE_REDOWNLOAD=true \
-p 25565:25565 -e EULA=TRUE --name mc itzg/minecraft-server
By default, the container will switch to user ID 1000 and group ID 1000;
however, you can override those values by setting UID
and/or GID
as environmental entries, during the docker run
command.
-e UID=1234
-e GID=1234
The container will also skip user switching if the --user
/-u
argument
is passed to docker run
.
By default, the image declares an initial and maximum Java memory-heap limit of 1 GB. There are several ways to adjust the memory settings:
MEMORY
: "1G" by default, can be used to adjust both initial (Xms
) and max (Xmx
) memory heap settings of the JVMINIT_MEMORY
: independently sets the initial heap sizeMAX_MEMORY
: independently sets the max heap size
The values of all three are passed directly to the JVM and support format/units as <size>[g|G|m|M|k|K]
. For example:
-e MEMORY=2G
To let the JVM calculate the heap size from the container declared memory limit, unset MEMORY
with an empty value, such as -e MEMORY=""
. By default, the JVM will use 25% of the container memory limit as the heap limit; however, as an example the following would tell the JVM to use 75% of the container limit of 2GB of memory:
-e MEMORY="" -e JVM_XX_OPTS="-XX:MaxRAMPercentage=75" -m 2000M
The settings above only set the Java heap limits. Memory resource requests and limits on the overall container should also account for non-heap memory usage. An extra 25% is a general best practice.
General JVM options can be passed to the Minecraft Server invocation by passing a JVM_OPTS
environment variable. The JVM requires -XX
options to precede -X
options, so those can be declared in JVM_XX_OPTS
. Both variables are space-delimited, raw JVM arguments.
docker run ... -e JVM_OPTS="-someJVMOption someJVMOptionValue" ...
NOTE When declaring JVM_OPTS
in a compose file's environment
section with list syntax, do not include the quotes:
environment:
- EULA=true
- JVM_OPTS=-someJVMOption someJVMOptionValue
Using object syntax is recommended and more intuitive:
environment:
EULA: "true"
JVM_OPTS: "-someJVMOption someJVMOptionValue"
# or
# JVM_OPTS: -someJVMOption someJVMOptionValue
As a shorthand for passing several system properties as -D
arguments, you can instead pass a comma separated list of name=value
or name:value
pairs with JVM_DD_OPTS
. (The colon syntax is provided for management platforms like Plesk that don't allow =
inside a value.)
For example, instead of passing
JVM_OPTS: -Dfml.queryResult=confirm -Dname=value
you can use
JVM_DD_OPTS: fml.queryResult=confirm,name=value
Arguments that would usually be passed to the jar file (those which are written after the filename) can be passed via the EXTRA_ARGS
environment variable.
See Custom worlds directory path for an example.
If you would like to docker attach
to the Minecraft server console with color and interactive capabilities, then add
-e EXEC_DIRECTLY=true
NOTES
This feature doesn't work via rcon, so you will need to
docker attach
to the container. Use the sequence Ctrl-P, Ctrl-Q to detach.This will bypass graceful server shutdown handling when using
docker stop
, so be sure the server console'sstop
command.Make to enable stdin and tty with
-it
when usingdocker run
orstdin_open: true
andtty: true
when using docker compose.This feature is incompatible with Autopause and cannot be set when
ENABLE_AUTOPAUSE=true
.
To allow time for players to finish what they're doing during a graceful server shutdown, set STOP_SERVER_ANNOUNCE_DELAY
to a number of seconds to delay after an announcement is posted by the server.
NOTE be sure to adjust Docker's shutdown timeout accordingly, such as using the -t option on docker-compose down.
The openj9 image tags include specific variables to simplify configuration:
-e TUNE_VIRTUALIZED=TRUE
: enables the option to optimize for virtualized environments-e TUNE_NURSERY_SIZES=TRUE
: configures nursery sizes where the initial size is 50% of theMAX_MEMORY
and the max size is 80%.
By default the vanilla log file will grow without limit. The logger can be reconfigured to use a rolling log files strategy by using:
-e ENABLE_ROLLING_LOGS=true
NOTE this will interfere with interactive/color consoles as described in the section above
You can configure the timezone to match yours by setting the TZ
environment variable:
-e TZ=Europe/London
such as:
docker run -d -it -e TZ=Europe/London -p 25565:25565 --name mc itzg/minecraft-server
Or mounting /etc/timezone
as readonly (not supported on Windows):
-v /etc/timezone:/etc/timezone:ro
such as:
docker run -d -it -v /etc/timezone:/etc/timezone:ro -p 25565:25565 --name mc itzg/minecraft-server
To enable remote JMX, such as for profiling with VisualVM or JMC, add the environment variable ENABLE_JMX=true
, set JMX_HOST
to the IP/host running the Docker container, and add a port forwarding of TCP port 7091, such as:
-e ENABLE_JMX=true -e JMX_HOST=$HOSTNAME -p 7091:7091
Aikar has done some research into finding the optimal JVM flags for GC tuning, which becomes more important as more users are connected concurrently. The set of flags documented there can be added using
-e USE_AIKAR_FLAGS=true
When MEMORY
is greater than or equal to 12G, then the Aikar flags will be adjusted according to the article.
You may configure the use of an HTTP/HTTPS proxy by passing the proxy's URL via the PROXY
environment variable. In the example compose file it references
a companion squid proxy by setting the equivalent of
-e PROXY=proxy:3128
Some older versions (pre-1.14) of Spigot required --noconsole
to be passed when detaching stdin, which can be done by setting -e CONSOLE=FALSE
.
Some older servers get confused and think that the GUI interface is enabled. You can explicitly
disable that by passing -e GUI=FALSE
.
When the container is signalled to stop, the Minecraft process wrapper will attempt to send a "stop" command via RCON or console and waits for the process to gracefully finish. By default it waits 60 seconds, but that duration can be configured by setting the environment variable STOP_DURATION
to the number of seconds.
If you are using a host-attached data directory, then you can have the image setup the Minecraft server files and stop prior to launching the server process by setting SETUP_ONLY
to true
.
To enable the JVM flags required to fully support the Flare profiling suite, set the following variable:
-e USE_FLARE_FLAGS=true
Flare is built-in to Pufferfish/Purpur, and is available in plugin form for other server types.
To enable support for optimized SIMD operations, the JVM flag can be set with the following variable:
-e USE_SIMD_FLAGS=true
SIMD optimized operations are supported by Pufferfish and Purpur.
Before the container starts the Minecraft Server its output is prefixed with [init]
, such as
[init] Starting the Minecraft server...
To also include the timestamp with each log, set LOG_TIMESTAMP
to "true". The log output will then look like:
[init] 2022-02-05 16:58:33+00:00 Starting the Minecraft server...
RCON commands can be configured to execute when the server starts, a client connects, or a client disconnects.
When declaring several commands within a compose file environment variable, it's easiest to use YAML's
|-
block style indicator.
On Server Start:
RCON_CMDS_STARTUP: |-
gamerule doFireTick false
pregen start 200
On Client Connection:
RCON_CMDS_ON_CONNECT: |-
team join New @a[team=]
Note:
- On client connect we only know there was a connection, and not who connected. RCON commands will need to be used for that.
On Client Disconnect:
RCON_CMDS_ON_DISCONNECT: |-
gamerule doFireTick true
On First Client Connect
RCON_CMDS_FIRST_CONNECT: |-
pregen stop
On Last Client Disconnect
RCON_CMDS_LAST_DISCONNECT: |-
kill @e[type=minecraft:boat]
pregen start 200
Example of rules for new players
Uses team NEW and team OLD to track players on the server. So move player with no team to NEW, run a command, move them to team OLD. Reference Article
RCON_CMDS_STARTUP: |-
/pregen start 200
/gamerule doFireTick false
/team add New
/team add Old
RCON_CMDS_ON_CONNECT: |-
/team join New @a[team=]
/give @a[team=New] birch_boat
/team join Old @a[team=New]
RCON_CMDS_FIRST_CONNECT: |-
/pregen stop
RCON_CMDS_LAST_DISCONNECT: |-
/kill @e[type=minecraft:boat]
/pregen start 200
There are various bug reports on Mojang about high CPU usage of servers with newer versions, even with few or no clients connected (e.g. this one, in fact the functionality is based on this comment in the thread).
An autopause functionality has been added to this image to monitor whether clients are connected to the server. If for a specified time no client is connected, the Java process is stopped. When knocking on the server port (e.g. by the ingame Multiplayer server overview), the process is resumed. The experience for the client does not change.
Of course, even loaded chunks are not ticked when the process is stopped.
You must greatly increase or disable max-tick-time watchdog functionality. From the server's point of view, the pausing causes a single tick to take as long as the process is stopped, so the server watchdog might intervene after the process is continued, possibly forcing a container restart. To prevent this, ensure that the max-tick-time
in the server.properties
file is set to a very large value or -1 to disable it entirely, which is highly recommended. That can be set with MAX_TICK_TIME
as described in the section below.
NOTE: Non-vanilla versions might have their own configuration file, you might have to disable their watchdogs separately. For PaperMC servers, you need to send the JVM flag
-Ddisable.watchdog=true
, this can be done with the docker env variable-e JVM_DD_OPTS=disable.watchdog:true
On startup the server.properties
file is checked and, if applicable, a warning is printed to the terminal. When the server is created (no data available in the persistent directory), the properties file is created with the Watchdog disabled.
The utility used to wake the server (knock(d)
) works at network interface level. So the correct interface has to be set using the AUTOPAUSE_KNOCK_INTERFACE
variable when using non-default networking environments (e.g. host-networking, Portainer oder NAS solutions). See the description of the variable below.
A file called .paused
is created in /data
directory when the server is paused and removed when the server is resumed. Other services may check for this file's existence before waking the server.
A starting, example compose file has been provided in examples/docker-compose-autopause.yml.
Enable the Autopause functionality by setting:
-e ENABLE_AUTOPAUSE=TRUE
Autopause is not compatible with EXEC_DIRECTLY=true
and the two cannot be set together.
When configuring kubernetes readiness/liveness health checks with auto-pause enabled, be sure to reference the
mc-health
wrapper script rather thanmc-status
directly.
The following environment variables define the behaviour of auto-pausing:
AUTOPAUSE_TIMEOUT_EST
, default3600
(seconds) describes the time between the last client disconnect and the pausing of the process (read as timeout established)AUTOPAUSE_TIMEOUT_INIT
, default600
(seconds) describes the time between server start and the pausing of the process, when no client connects inbetween (read as timeout initialized)AUTOPAUSE_TIMEOUT_KN
, default120
(seconds) describes the time between knocking of the port (e.g. by the main menu ping) and the pausing of the process, when no client connects inbetween (read as timeout knocked)AUTOPAUSE_PERIOD
, default10
(seconds) describes period of the daemonized state machine, that handles the pausing of the process (resuming is done independently)AUTOPAUSE_KNOCK_INTERFACE
, defaulteth0
Describes the interface passed to theknockd
daemon. If the default interface does not work, run theifconfig
command inside the container and derive the interface receiving the incoming connection from its output. The passed interface must exist inside the container. Using the loopback interface (lo
) does likely not yield the desired results.
To troubleshoot, add
DEBUG_AUTOPAUSE=true
to see additional output
An option to stop the server after a specified time has been added for niche applications (e.g. billing saving on AWS Fargate). The function is incompatible with the Autopause functionality, as they basically cancel out each other.
Note that the docker container variables have to be set accordingly (restart policy set to "no") and that the container has to be manually restarted.
A starting, example compose file has been provided in examples/docker-compose-autostop.yml.
Enable the Autostop functionality by setting:
-e ENABLE_AUTOSTOP=TRUE
The following environment variables define the behaviour of auto-stopping:
AUTOSTOP_TIMEOUT_EST
, default3600
(seconds) describes the time between the last client disconnect and the stopping of the server (read as timeout established)AUTOSTOP_TIMEOUT_INIT
, default1800
(seconds) describes the time between server start and the stopping of the server, when no client connects inbetween (read as timeout initialized)AUTOSTOP_PERIOD
, default10
(seconds) describes period of the daemonized state machine, that handles the stopping of the server
To troubleshoot, add
DEBUG_AUTOSTOP=true
to see additional output
To run this image on a RaspberryPi 3 B+, 4, or newer, use any of the image tags list in the Java version section that specify armv7
for the architecture, which includes itzg/minecraft-server:latest
.
NOTE: you may need to lower the memory allocation, such as
-e MEMORY=750m
If experiencing issues such as "sleep: cannot read realtime clock: Operation not permitted", ensure
libseccomp
is up to date on your host. In some cases adding:Z
flag to the/data
mount may be needed, but use cautiously.
See Development and Building.