A ROS package that can be used to generate SDF models for fiducial markers. This is more of a helper package to create large amount of SDF marker models with relative ease which can be used in robotic simulation software like Gazebo.
The following software dependencies must me met before using this package.
shuitilsvia PyPilxmlvia PyPiopencv-pythonvia PyPiopencv-contrib-pythonvia PyPiar_track_alvarvia ROS
Change directory into ~/catkin_ws/src/gazebo_fiducial_generator and run the following commands to setup the package and create SDF models. First install the required Python packages.
pip3 install -r requirements.txtArUco marker creator comes packaged with OpenCV
The final step is to install ar_track_alvar package which is found here. This package contains the createMarker binary which is used by this package to create the marker models.
sudo apt install ros-<distribution>-ar-track-alvarPlease note that this is only tested with Melodic Morenia
To create the SDF models, there are multiple methods. But first, the marker type needs to be selected using --marker_type option. By default aruco is used. For other marker types use --help.
# To create a single model of an ALVAR marker
rosrun gazebo_fiducial_generator createMarkerModels.py --marker_type alvar --ids 0
# To create a range of marker models with IDs from 0 to 5
rosrun gazebo_fiducial_generator createMarkerModels.py --ids 0-5
# To create a list of markers models whose IDs are discontinous
rosrun gazebo_fiducial_generator createMarkerModels.py --ids 2,3,5,7,11,13This will create a root directory called <marker_type>_markers which will contain folders of the SDF marker models that were specified. The root directory which contains all the models is by default created in the current working directory.
If the models needs to be created without a root directory, the --no_root_dir option can be used. If it is required to put the models in a different director other than the current working directory, the --output_dir option can be used. Both of these options are useful if the marker models needs to be placed in the default Gazebo models folder. This is usally located in ~/.gazebo/models/.
# To create the models in Gazebo's default models directory
rosrun gazebo_fiducial_generator createMarkerModels.py --ids 0-5 --no_root_dir --output_dir ~/.gazebo/models/By default, the geometry of the model is a box with sides 9.0cm and thickness 0.1cm. When the size of the sides of the box is set to a value, the same size is used to create the fiducial marker. The geometry of the model can be set to either box or plane using the --geometry option. An example of this is given below. Size and thickness inputs are in centimeters.
# To create marker models with box geometry, size 11.0cm and thickness 0.2cm
rosrun gazebo_fiducial_generator createMarkerModels.py --ids 0-5 --geometry box --size 11.0 --thickness 0.2
# To create marker models with plane geometry, size 10.0cm (Thickness is not required)
rosrun gazebo_fiducial_generator createMarkerModels.py --ids 0-5 --geometry plane --size 10.0If a white border needs to be added around the marker, the size of it can be specified using the --white_border_size option. The size of the model will
be automatically adjusted to accomodate the border while keeping the specified tag size.
# To create tag models with a white border of size 2.0cm
rosrun gazebo_fiducial_generator createMarkerModels.py --ids 0-5 --size 9.0 --thickness 0.01 --white_border_size 2.0To get all the marker images that were used when creating the SDF model in a separate directory, the --copy_tag_images option can be used. This will create a directory called <marker_type>_tag_images in the root directory <marker_type>_markers, if it is enabled otherwise it will be created in the working directory.
# To copy the marker images used for model creation
rosrun gazebo_fiducial_generator createMarkerModels.py --ids 0-5 --copy_tag_imagesOther options are also available and can be viewed by using the --help option.
rosrun gazebo_fiducial_generator createMarkerModels.py -h
usage: createMarkerModels.py [-h] [-i IDS] [-mt {aruco,alvar}] [-g {box,plane}] [-s SIZE] [-t THICKNESS] [-wb WHITEBORDERSIZE] [-o OUTPUTDIR] [-nrd] [-cti] [-mdv VERSION] [-sdfv SDFVERSION] [-a AUTHOR] [-v] [-d DICTIONARY]
optional arguments:
-h, --help show this help message and exit
-i IDS, --ids IDS Required marker IDs in the form '2', '1-5' or '10,12,15'. Maximum number depends on marker type
-mt {aruco,alvar}, --marker_type {aruco,alvar}
The type of marker to be generated for creating the SDF models
-g {box,plane}, --geometry {box,plane}
Geometry of the marker model
-s SIZE, --size SIZE Length and width of the box or plane in cm
-t THICKNESS, --thickness THICKNESS
Thickness of box if it is used as model geometry in cm
-wb WHITEBORDERSIZE, --white_border_size WHITEBORDERSIZE
White border to be applied around the marker image in cm
-o OUTPUTDIR, --output_dir OUTPUTDIR
Directory where the models are saved to. Defaults to current working directory
-nrd, --no_root_dir Do not create a root directory for the models to be saved in
-cti, --copy_tag_images
Copies the tag images used for model creation to a separate directory
-mdv VERSION, --model_version VERSION
Model version number
-sdfv SDFVERSION, --sdf_version SDFVERSION
SDF version number
-a AUTHOR, --author AUTHOR
Name of the author for the model
-v, --verbose Verbose output during model creation
ArUco marker specific arguments:
-d DICTIONARY, --dictionary DICTIONARY
The dictionary to use for creating markers if ArUco is selected
The marker models can be inserted into Gazebo by adding the folder path to the models in the insert tab. A marker model in Gazebo simulation is shown below. To add the marker models in a custom path, the GAZEBO_MODEL_PATH environment variable needs to be set to the correct path in either the ~/.bashrc file or roslaunch file using the <env> tag when launching Gazebo.
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent