ahmedelsagher / android-os-monitor Goto Github PK

What steps will reproduce the problem?
1. Start OS Monitor, have seen it when installed on device but also when moved 
to SD card, list of running processes appears, ok
2. Press Misc, then a window appears, in german, but telling me:
3. The applic. OSMonitor (process com.eolwral.osmonitor) has been stopped, try 
again.

What is the expected output? What do you see instead?
Expecting the displays that Misc shall provide.

What version of the product are you using? On what operating system?
Device is HTC Sensation, Android 2.3, not rooted. 

Please provide any additional information below.

Thanks for support !!!

What steps will reproduce the problem?
1. Get an IPv6 address assigned
2.
3.

What is the expected output? What do you see instead?
IPV6 addresses are sometimes not shown.

What version of the product are you using? On what operating system?
2.0.5

Please provide any additional information below.
Suggested solution: in network.c:if_dump()
replace: n = fscanf(pnd, "%8X%8X%8X%8X %*d %x %*d %*d %s", 
with: n = fscanf(pnd, "%8X%8X%8X%8X %*x %x %*x %*x %s", 
Reason: if one of the %*d fields is hex: netmask and/or hostname will be 
wrongly parsed

Help button points on a dead link (error 404)

Monitor version 2.0.5

Device Samsung Galaxy GT I9000

Android version 2.3.6

LG Optimus S running DanteRom

first of all, this is a VERY cool app!

on the first install i noticed that neither green nor blue color is selected 
for cpu graph in notification area

the graph sometimes works, then goes blank (just shows vertical/horizontal 
bars, like an HTML table)

When enabling Wi-Fi, OSMonitor does not display the IPv6 of the eth0 interface 
(last of the list in "Network" tab). I only see my IPv4 class C address for 
eth0.

I'm sure i have global IPv6 address on the device because i can use IPv6 in and 
outside my network and see TCP6 connections in the "Connection" tab (mail 
through IMAP, ssh sessions, etc.).
The only IPv6 address listed in the "Network" tab is for loopback interface 
(lo), correctly displayed.

Not a severe issue though, but i appreciated your app and this is the only 
remark i have :). Thanks for your work.

Version : 1.1.8
Android : 2.2 (Froyo)
Device  : HTC Desire

Unfortunarelly the app neither supports portrait mode nor rotation of 180°. 
That is bad when using a tablet with a dock or a case that needs the tab to be 
put in upside down.

What steps will reproduce the problem?
1. Open OS Monitor 
2. App will close or force close


What is the expected output? What do you see instead?

Expected app to start but it crashed instead.

What version of the product are you using? On what operating system?

v2.0.5 and on Gingerbread 2.3.4

Please provide any additional information below.

W/dalvikvm( 2806): Unable to resolve superclass of 
Lcom/eolwral/osmonitor/networks/NetworkList; (207)
W/dalvikvm( 2806): Link of class 'Lcom/eolwral/osmonitor/networks/NetworkList;' 
failed
E/dalvikvm( 2806): Could not find class 
'com.eolwral.osmonitor.networks.NetworkList', referenced from method 
com.eolwral.osmonitor.OSMonitor.onCreate
W/dalvikvm( 2806): VFY: unable to resolve const-class 184 
(Lcom/eolwral/osmonitor/networks/NetworkList;) in 
Lcom/eolwral/osmonitor/OSMonitor;
D/dalvikvm( 2806): VFY: replacing opcode 0x1c at 0x00bd
D/dalvikvm( 2806): VFY: dead code 0x00bf-0125 in 
Lcom/eolwral/osmonitor/OSMonitor;.onCreate (Landroid/os/Bundle;)V

What steps will reproduce the problem?
1. Install app
2. Launch


What is the expected output? What do you see instead?
Expect list of processes. Just displaying 'Loading...'

What version of the product are you using? On what operating system?
1.1.8 - Froyo 2.2

Please provide any additional information below.
Phone is temp rooted.

Thanks for your help.

Fabio

What steps will reproduce the problem?
1. Open OSMonitor
2. Switch to Misc tab
3. Small buttons

What is the expected output? What do you see instead?
 Not small buttons. Small buttons.

What version of the product are you using? On what operating system?
Latest version. Android 2.2.1 

Please provide any additional information below.
HTC Magic Vodafone 32B. Buttons for CPU settings is too small for Magic's 
screen. Or something like that. Need 5-6 tries for success.

What steps will reproduce the problem?
1. Start application, Process tab
2. Ensure that third column displays memory values for processes (Mem)

What is the expected output? What do you see instead?
The list contains huge, unreal values. If you sum them, the final value would 
be something like 600-700 MBs, while Memory Total shows only 287 MB (for my 
particular device). It would be nice to see real memory consuming per each 
process.

What version of the product are you using? On what operating system?
1.1.8, Android 2.1update-1

Please provide any additional information below.
Running SE x10i, 2.1, rooted.

What steps will reproduce the problem?
1. adb install OSMonitor-2.0.5.apk
2. nstallation error: INSTALL_FAILED_MISSING_SHARED_LIBRARY
3.

What is the expected output? What do you see instead?
Installation error: INSTALL_FAILED_MISSING_SHARED_LIBRARY

What version of the product are you using? On what operating system?

android 4.0
Please provide any additional information below.

What steps will reproduce the problem?
1. Run OSMonitor and see the message. 
2. Here comes ERROR message.  

What is the expected output? What do you see instead?
The message is "cpcap_batt_irq_hdir:irq=73"
               "cpcap_batt_irq hdir:irq=75"
Could please let me know what are these messages means?

What version of the product are you using? On what operating system?
I used rev. 1.1.8 on Android 2.1 phone. 

Please provide any additional information below.
My cell phone is Motorola XT701.
Attach is error message.
Thank you very much.

What steps will reproduce the problem?
1. Build OSMonitor with sources 3.0.6.5 and ActionBarSherlock 4.3.1
2. Push it on the target (Android 2.3.3)
3. Launch it


What is the expected output? What do you see instead?

Expected : 
Application working as it works when installing the application with 
OSMonitor-3.0.6.5.apk available on git repository 
(http://code.google.com/p/android-os-monitor/downloads/list)

Instead : 
Application doesn't work fully. Some tab content (Process,Connection,Message) 
are empty. 
About Misc tab, it is not fully empty : Tab category are printed 
(System,Battery,CPU,...) but its content have no data, 
just fields are printed (Memory for example : Total, Free, Cached and Buffered 
are printed but there is no  amount data printed).


What version of the product are you using? On what operating system?

Version product : 
OSMonitor sources : 3.0.6.5
ActionBarSherlock : 4.3.1

Operating system:
Android 2.3.3


Please provide any additional information below.
Extract of Logcat attached : 
beginning of logcat extract corresponds at the moment when I launched the 
application
At the beggining, the application was on Process tab and I have selected 
Message tab.
That's all I have done.

What steps will reproduce the problem?
1. Press "Menu" button
2. Select "Options"

What is the expected output? What do you see instead?

The "Autostart" and "Show Celsius" items and all items in section "Misc" are 
inactive. Maybe it isn't a bug, but I don't know, why they are inactive because 
of a broken help and inability to find any user manual or documentation.

What version of the product are you using? On what operating system?

2.0.5

What steps will reproduce the problem?
1. Press "Menu" button
2. Select "Help"

What is the expected output? What do you see instead?

I would like to see help or user manual, but I got 404 (Not Found) from Google. 
Requested page is "/hg/phonehelp.html?..." (there are some parameters insted of 
three dots).

What version of the product are you using? On what operating system?

2.0.5

Please provide any additional information below.

It's enough, I think :)

What steps will reproduce the problem?
1. Open the Interface Tab
2. Get an IPV6 address
3.

What is the expected output? What do you see instead?
Not all lines of text are shown in each row. Example: interface flags (up, 
running, etc.) are never shown.

What version of the product are you using? On what operating system?
2.0.5

Please provide any additional information below.
Solution: (at least for my Galaxy S)
Class InterfaceList.java method: getChild() 
Remove: AbsListView.LayoutParams lp = new AbsListView.LayoutParams(
    ViewGroup.LayoutParams.FILL_PARENT, 120);
    TextView textView = new TextView(getApplication());
Remove: textView.setLayoutParams(lp);

What steps will reproduce the problem?
1. Display processes
2. sort by cpu load
3. display system processes

What is the expected output? What do you see instead?
When I do this OS Monitor zooms to the top of its list consuming about 80% of 
the CPU (Nexus one, rooted, froyo)

What version of the product are you using? On what operating system?
V1.1.7

Please provide any additional information below.

What steps will reproduce the problem?
1. Assign an address where on of the bytes is less the 0xF

What is the expected output? What do you see instead?
One should see a prepended zero. Example address bytes :2002: become :202:

What version of the product are you using? On what operating system?
2.0.5

Please provide any additional information below.
Solution:
in function net_addr2str_ipv6():
change: snprintf(ipv6buf, BUFFERSIZE, "%x%x" ...
to: snprintf(ipv6buf, BUFFERSIZE, "%02x%02x" ...

Hi
Is it the OS Monitor application which repeatedly generates these messages in 
the DMESG log?

I have the same problem as described in this thread: 
http://forum.xda-developers.com/showthread.php?t=864438
The only common thing except Android seems to be OS Monitor


I can see these messages in OS Monitor message-function (Dmesg).
Desire HD, Android 2.2, OS Monitor 1.1.8

What steps will reproduce the problem?
1. Explanation of process
2.  List of commands
3. General faq
q
What is the expected output? What do you see instead?


What version of the product are you using? On what operating system?
latest version, 10q/21 epic froyo 2.2.1

Please provide any additional information below.

 I would like more control and insight to my device, just having trouble figuring out how to use your software

What steps will reproduce the problem?
1. Run OS Monitor
2. Watch
3.

What version of the product are you using? On what operating system?
It identifies itself a 1.1.7

Please provide any additional information below.

one of the uses for the network monitor could be to configure the firewall in a 
router.  as such, it might be good to log the connection history so it is 
available later

i'm not seeing this info in logcat and i think it might be more intuitive to 
provide it in the network connection tab anyway - perhaps from the options menu

What steps will reproduce the problem?
1. Open the notification bar
2.
3.

What is the expected output? What do you see instead?

I'd like to open android notification bar and see which process is taking more 
cpu at the given time. Because whenever I'm seeing the processor is using 100%, 
if I open osmonitor it seems that the process which was eating up cpu is put to 
sleep as the processor usage goes down. If OS Monitor could show me the process 
in the notification bar, it would be easier to identify the eating cpu process.

Today I only see the cpu usage and free memory.

What version of the product are you using? On what operating system?

1.1.8 from Market

Please provide any additional information below.

[Change request]

Samsung Galaxy S4 I9500, firmware 4.3

I ran tcpdump. In the dump, I see many HTTP requests on port 80. One request 
per minute for a long time.

request:
GET /generate_204 HTTP/1.1\r\n
User-Agent: Dalvik/1.6.0 (Linux; U; Android 4.3; GT-I9500 Build/JSS15J)\r\n
Host: clients3.google.com\r\n

answer:
HTTP/1.1 204 No Content\r\n
Server: GFE/2.0\r\n

OS Monitor can not see connections http://clients3.google.com/generate_204 
Please add detect of system requests.

What steps will reproduce the problem?
1. switsch to view log dmesg
2. no filter
3.

What is the expected output? What do you see instead?
no output

What version of the product are you using? On what operating system?
2.0.5

Please provide any additional information below.

no messages are shown. logcat works fine

LG Optimus S running DanteRom

she's crashing allot, particularly when the UI is first run.  attached is what 
will hopefully be a helpful log :)

This optional log would be useful to spot things while the screen is off.

Hi,

My phone is not support google framework, how to install it on my phone.
I have checked the source code, it need google map support, how can i build a 
version without google map?
Thanks. 

What steps will reproduce the problem?
1. Install OSMonitor_Tablet-1.0.2.apk

What is the expected output? What do you see instead?
I got the error: Parse error: There is a problem parsing the package.

What version of the product are you using? On what operating system?
OSMonitor_Tablet-1.0.2
Samsung Galaxy Tab, European GSM model, GT-P1000, Firmware 2.2.

Best regards,
Darin

minor feature request regarding logging; auto-name file with date stamp on 
export

What steps will reproduce the problem?
1.
2.
3.

What is the expected output? What do you see instead?


What version of the product are you using? On what operating system?


Please provide any additional information below.

What steps will reproduce the problem?
1. Download apk
2. "Application not installed"
3.

What is the expected output? What do you see instead?


What version of the product are you using? On what operating system?
cyanogenmod 9 v7 on nexus s

Please provide any additional information below.

Hi,
I used homepage command to clone source code, but I get an empty repository.

The table version that it's on the Market does not allow to be installed on the 
Pocket eDGe running Froyo 2.2.

Running OS Monitor 3.0.6.5 on my Nexus 7 (Android 4.3), it displays a diamond 
with a question mark inside followed by an X instead of a degree symbol. This 
happens both in the app under the misc tab and in the persistent notification. 
(See screenshot)

i would suggest adding such option to preferences with default new setted.

or just make it detect tablet - new layout
smartphone - old layout

new one is basicly unredable on i9000

Could you include some more details on the whois page? My suggestion would be 
an additional section like "extended information", where things should be 
listed like e.g.:

* URL belonging to the given IP
* who "owns" this IP (or the block it belongs to)

It's nice to see where it's located - but if I'm "suspicious" of what stands 
behind, the location alone does not help me that much :-)

What steps will reproduce the problem?
1. Trying to install any version of OS Monitor

What is the expected output? What do you see instead?
Expected output is being able to install and use the app. What I see is that 
its not compatible.


What version of the product are you using? On what operating system?
Any version of OS Monitor. Initial stock build on the PocketTV is Android 4.0.4 
ICS

Please provide any additional information below.
I would like to see compatibility with this device. I'm not sure why it doesn't 
work already. I believe they are using more or less a standard ARM Cortex A9 
single core design. This device has only been shipping for a short time but I 
would like to use OS Monitor with it.

LG Optimus S, DanteRom

clicking on a list item on the network tab causes an exception - in my case it 
looks like this is due to not having the play store or google maps installed

please consider another approach/alternative to google maps for us privacy 
consciousness folks, such as open street maps ?

It would be more useful if the icon displayed on the notification area showed a 
historic graph of the last seconds of cpu usage, not just one bar showing the 
current cpu usage.

Check the attached image if my wording is not clear enough.. :)

What steps will reproduce the problem?
1. any time I try to use the misc function
2.
3.

What is the expected output? What do you see instead?


What version of the product are you using? On what operating system?
2.0.1                    2.3.4

Please provide any additional information below.

The name of the application displayed on android system is "OSMonitor"

I expected to see the application named as "OS Monitor". It is the same as the 
name of the application displayed in the Android Market and is the logical one: 
it is an application that monitors (Monitor) the operating system (OS). In two 
words.

I am using version 1.1.8 on HTC Wildfire running Android 2.2.1

Otherwise, it is an excellent application and is running just fine on my phone.

Have a nice day,
Costi.

What steps will reproduce the problem?
1. Start os-monitor
2. Go to 'Misc', that is working now without crash, thanks a lot!
3. Press Android Menu button and go to 'Options'
4. Without necessity to change settings
5. Press Android 'Back' button to leave the options menue
6. Crash with error report: process com.eolwral.osmonitor has been stopped

Remark: Does e.g. not happen when going from 'Network' to the Options menue.

What is the expected output? What do you see instead?
Expecting standard program closing

What version of the product are you using? On what operating system?
Newest OS Monitor release updated today

Please provide any additional information below.
I will again send the error report generated from the program.
Hope this helps.

Thanks for support!

What steps will reproduce the problem?
1. adb install OSMonitor-2.0.5.apk
2. C:\Users\dlan>adb install OSMonitor-2.0.5.apk
2187 KB/s (190400 bytes in 0.085s)
        pkg: /data/local/tmp/OSMonitor-2.0.5.ap
Failure [INSTALL_FAILED_MISSING_SHARED_LIBRARY]


What is the expected output? What do you see instead?
install succesfull.
Failure [INSTALL_FAILED_MISSING_SHARED_LIBRARY]

What version of the product are you using? On what operating system?

Samsung GT-I9300
android 4.1.2

Please provide any additional information below.

N/A

Failed to install with error:

D/PackageManager(  978): Scanning package com.eolwral.osmonitor
E/PackageManager(  978): Package com.eolwral.osmonitor requires unavailable 
shared library com.google.android.maps; failing!
W/PackageManager(  978): Package couldn't be installed in 
/data/app/com.eolwral.osmonitor-1.apk

Device Marvell GM10 aka Bluepanther Thunder 7" aka Leader GM10

Thanks for this useful piece of software. But the settings menu is a bit 
overloaded. Especially I think the configurable sort algorithm is complete 
nonsense. That's something very internal to the implementation and there is no 
need for the user to have to choose.

Not to mention that there is really no reason to use bubble sort except for 
educational purposes ;)

The table version that it's on the Market does not allow to be installed on the 
Pocket eDGe running Froyo 2.2.

The process android.process.acore displays Horloge du calendrier.  It seams to 
me that's not realy possible.

OS Monitor version 2.0.5

Device Samsung Galaxy GT I9000

Android version 2.3.6